u-boot.git/include/configs/ci20.h, branch master

Convert CONFIG_DM9000_BYTE_SWAPPED et al to Kconfig

2022-12-22T15:31:47+00:00

This converts the following to Kconfig:
   CONFIG_DM9000_BYTE_SWAPPED
   CONFIG_DM9000_NO_SROM
   CONFIG_DM9000_USE_16BIT
   CONFIG_DM9000_DEBUG
   CONFIG_MXC_GPT_HCLK
   CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC

Signed-off-by: Tom Rini

global: Move remaining CONFIG_SYS_* to CFG_SYS_*

2022-12-05T21:06:08+00:00

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

2022-12-05T21:06:07+00:00

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*

2022-12-05T21:06:07+00:00

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

Convert CONFIG_SYS_MONITOR_LEN to Kconfig

2022-11-10T15:08:55+00:00

This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig

2022-11-02T20:42:32+00:00

This converts the following to Kconfig:
    CONFIG_SYS_MIPS_TIMER_REQ

Signed-off-by: Daniel Schwierzeck 
Reviewed-by: Stefan Roese

MIPS: remove CONFIG_SYS_MHZ

2022-11-02T20:42:32+00:00

Resolve all uses of CONFIG_SYS_MHZ with the currently defined value.
Remove code which depends on CONFIG_SYS_MHZ but where no board configs
actually use that code.

Signed-off-by: Daniel Schwierzeck 
Reviewed-by: Stefan Roese

Convert CONFIG_SYS_BOOTM_LEN to Kconfig

2022-07-07T18:01:09+00:00

This converts the following to Kconfig:
   CONFIG_SYS_BOOTM_LEN

As part of this, rework error handling in boot/bootm.c so that we pass
the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not
be available to host tools but we do know the size that we passed to
malloc().

Cc: Soeren Moch 
Signed-off-by: Tom Rini

spl: Remove CONFIG_SPL_START_S_PATH and rework the logic behind it

2022-06-06T16:09:29+00:00

In some cases, when we don't use CONFIG_SPL_FRAMEWORK nor are we on
PowerPC using their specific SPL/TPL framework, we need to specify the
start.S file to use for these typically very constrained systems.  Do
this within the Makefile logic, rather than introducing a string-based
CONFIG option, as this would get slightly complex to do in Kconfig for a
very limited number of users.

Signed-off-by: Tom Rini

Convert CONFIG_SPL_BSS_START_ADDR to Kconfig

2022-06-06T16:09:28+00:00

This converts the following to Kconfig:
   CONFIG_SPL_BSS_START_ADDR

Signed-off-by: Tom Rini