u-boot.git/include/configs/conga-qeval20-qa3-e3845.h, branch master

bios_emulator: Drop VIDEO_IO_OFFSET

2023-07-17T09:08:44+00:00

This is always zero in the source tree, so drop it.

While we are here, add a comment to _X86EMU_env since the symbol is
actually defined twice, which can cause confusion when building.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

global: Migrate CONFIG_STD_DEVICES_SETTINGS to CFG

2022-12-23T15:15:12+00:00

Perform a simple rename of CONFIG_STD_DEVICES_SETTINGS to CFG_STD_DEVICES_SETTINGS

Signed-off-by: Tom Rini

global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG

2022-12-23T15:09:42+00:00

Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS

Signed-off-by: Tom Rini

Convert CONFIG_FLASH_SPANSION_S29WS_N et al to Kconfig

2022-12-22T15:31:48+00:00

This converts the following to Kconfig:

   CONFIG_FLASH_SPANSION_S29WS_N
   CONFIG_FLASH_VERIFY
   CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
   CONFIG_FSL_ISBC_KEY_EXT
   CONFIG_FSL_TRUST_ARCH_v1
   CONFIG_FSL_SDHC_V2_3
   CONFIG_MAX_DSP_CPUS
   CONFIG_MIU_2BIT_INTERLEAVED
   CONFIG_SERIAL_BOOT
   CONFIG_SPI_BOOTING
   CONFIG_X86EMU_RAW_IO

Signed-off-by: Tom Rini

Convert CONFIG_SYS_MONITOR_LEN to Kconfig

2022-11-10T15:08:55+00:00

This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig

2021-12-01T15:58:10+00:00

This converts the following to Kconfig:
   CONFIG_USE_BOOTCOMMAND
   CONFIG_BOOTCOMMAND
   CONFIG_RAMBOOTCOMMAND
   CONFIG_NFSBOOTCOMMAND

Signed-off-by: Tom Rini

env: Finish migration of common ENV options

2019-11-20T23:32:09+00:00

- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk 
Cc: Joe Hershberger 
Cc: Patrick Delaunay 
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini 
Acked-by: Joe Hershberger 
Reviewed-by: Simon Goldschmidt

Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig

2019-08-02T15:19:14+00:00

This converts the following to Kconfig:
   CONFIG_USE_PREBOOT
   CONFIG_PREBOOT

Both are together in one commit, since otherwise the former causes kconfig
to define the latter, which gives duplicate symbol errors.

Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

Signed-off-by: Simon Glass

Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOT

2019-08-02T15:17:58+00:00

In order to use CONFIG_PREBOOT with Kconfig, CONFIG_USE_PREBOOT must be
defined for each board. To prepare for conversion to Kconfig, add this.

Signed-off-by: Simon Glass

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini