u-boot.git/include/configs/corenet_ds.h, branch v2011.09

powerpc/85xx: enable USB2 gadget mode for corenet ds board

2011-07-29T13:53:43+00:00

to make USB2 worked in gadget mode, we need to set it's 'dr_mode' to
'peripheral' in hwconfig, but driver starts scan from 'usb1', it'll break
out if it cannot find 'usb1', so drop the 'else' clause to make driver scan
all the 'usbx'.

Signed-off-by: Shaohui Xie 
Signed-off-by: Kumar Gala

fman: insert the Fman firmware into the device tree

2011-07-22T08:07:43+00:00

The Fman device tree node binding allows for the entire Fman firmware binary
data to be embedded in the device tree.  This eliminates the need to have
NOR flash mapped to Linux just so that the Fman driver can see the firmware.

The location of the Fman firmware is taken from the 'fman_ucode' environment
variable.

Signed-off-by: Timur Tabi 
Signed-off-by: Kumar Gala

powerpc/85xx: Add default usb mode and phy type to hwconfig

2011-07-11T18:24:21+00:00

Move to use hwconfig for usb mode & phy type instead of magic
'usb_phy_type' environment variable on the following platforms:

MPC8536DS, P1020RDB, P1020RDB-PC, P1010RDB, P2020RDB, P2020RDB-PC,
P2020RDB, P3041DS, P4080DS, & P5020DS.

Signed-off-by: Ramneek Mehresh 
Signed-off-by: Kumar Gala

powerpc/corenet_ds: add back buffer write for NOR flash

2011-07-11T18:24:21+00:00

Enable buffer write for better performance. This platform uses a NOR flash
chip which supports write buffer programming. CFI driver can query the
buffer size and use it to program the flash for best performance.

Signed-off-by: York Sun 
Signed-off-by: Kumar Gala

powerpc/85xx: Add NAND boot support for P3041/P5020DS

2011-07-11T18:24:19+00:00

When booting from NAND we get the environment and FMan ucode from NAND.

Signed-off-by: Shaohui Xie 
Signed-off-by: Kumar Gala

powerpc/85xx: add support for env in MMC/SPI on corenet ds boards

2011-05-18T14:15:25+00:00

Signed-off-by: Shaohui Xie 
Signed-off-by: Kumar Gala

powerpc/85xx: Enable eSPI support on corenet ds boards

2011-05-18T14:14:49+00:00

Signed-off-by: Shaohui Xie 
Signed-off-by: Kumar Gala

powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 64M on FSL 85xx boards

2011-04-29T12:36:18+00:00

CONFIG_SYS_BOOTMAPSZ has been 64M on these boards for some time so we
should also allow the kernel image to be up to 64M decompressed.  This
also matches what we pass to the OS based on the ePAPR specification.

Signed-off-by: Kumar Gala

powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code)

2011-04-28T03:29:04+00:00

The P3041DS & P5020DS boards are almost identical (except for the
processor in them).  Additionally they are based on the P4080DS board
design so we use the some board code for all 3 boards.

Some ngPIXIS (FPGA) registers where reserved on P4080DS and now have
meaning on P3041DS/P5020DS.  We utilize some of these for SERDES clock
configuration.

Additionally, the P3041DS/P5020DS support NAND.

Signed-off-by: Timur Tabi 
Signed-off-by: Shaohui Xie 
Signed-off-by: Kumar Gala

powerpc/85xx: Fix Wrong PCIe 3 virtual address on corenet_ds platforms

2011-04-28T03:29:03+00:00

This patch fixes a wrong address define in corenet_ds.h (used by
P4080DS.h, P3041DS.h, P5020DS.h).

Since board/Freescale/corenet_ds/tlb.c does not use the
CONFIG_SYS_PCIE3_MEM_VIRT define (uses CONFIG_SYS_PCIE1_MEM_VIRT with a
fix offset instead) this has no effect to the functionality. But it may
be important for changes in the future?

Signed-off-by: Ralf Trübenbach 
Cc: Andy Fleming 
Signed-off-by: Kumar Gala