u-boot.git/include/configs/corenet_ds.h, branch v2014.10

powerpc/srio-pcie-boot: Adjust addresses for SRIO/PCIE boot

2014-05-16T21:29:16Z

The new 768KB u-boot image size requires changes for SRIO/PCIE boot. These addresses need to be updated to appropriate locations. The updated addresses are used to configure the SRIO/PCIE inbound windows for the boot, and they must be aligned with the window size based on the SRIO/PCIE modules requirement. So for the 768KB u-boot image, the inbound window cannot be set with 0xfff40000 base address and 0xc0000 size, it should be extended to 1MB size and the base address can be aligned with the size. Signed-off-by: Liu Gang Reviewed-by: York Sun

mpc85xx: configs: remove c=ffe from default environment

2014-05-16T21:27:05Z

AFAICT, c=ffe does nothing and was a typo from the original commit d17123696c6180ac8b74fbd318bf14652623e982 "powerpc/p4080: Add support for the P4080DS board" and just kept on getting duplicated in subsequently added board config files. Signed-off-by: Kim Phillips Acked-by: Edward Swarthout Reviewed-by: York Sun

powerpc/freescale: Convert selected boards to generic board architecture

2014-05-13T15:31:22Z

This patch converts the following boards to use generic board: MPC8536DS, MPC8572DS, MPC8641HPCN, p1_p2_rdb_pc, corenet_ds, t4qds, B4860QDS. It has been tested on NOR boot on MPC8536DS, MPC8572DS, P1021RDB, P4080DS, P5020DS, P5040DS, P3041DS, T4240QDS, B4860QDS. Signed-off-by: York Sun CC: Ying Zhang CC: Prabhakar Kushwaha CC: Haijun.Zhang CC: Scott Wood CC: Shaohui Xie

powerpc/mpc85xx:Update MONITOR_LEN for 768KB u-boot size

2014-04-23T00:58:51Z

U-boot binary size has been increased from 512KB to 768KB. So update CONFIG_SYS_MONITOR_LEN to reflect the same. Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun

QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR

2014-04-23T00:58:47Z

CONFIG_SYS_QE_FMAN_FW_ADDR is used to both Fman and QE for microcode address. Now using CONFIG_SYS_FMAN_FW_ADDR for Fman microcode address, and CONFIG_SYS_QE_FW_ADDR for QE microcode address. Signed-off-by: Zhao Qiang Reviewed-by: York Sun

freescale: pblimage: refactor CONFIG_SYS_FSL_PBL_{PBI, RCW}

2014-03-12T21:04:49Z

Pull out "$(SRCTREE)/" from CONFIG_SYS_FSL_PBL_PBI and CONFIG_SYS_FSL_PBL_RCW and push it into the top Makefile. Signed-off-by: Masahiro Yamada Cc: York Sun Cc: Poonam Aggrwal Cc: Valentin Longchamp

powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk

2014-01-24T21:59:08Z

Define CONFIG_MPC85xx in arch/powerpc/cpu/mpc85xx/config.mk because all target boards with mpc85xx cpu define it. Signed-off-by: Masahiro Yamada

powerpc/mpc85xx:Increase binary size for P, B & T series boards.

2014-01-21T22:06:30Z

u-boot binary size for Freescale mpc85xx platforms is 512KB. This has been reached to upper limit for some of the platforms causig linker error. So, Increase the u-boot binary size to 768KB. Signed-off-by: York Sun Signed-off-by: Prabhakar Kushwaha

powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI

2014-01-21T22:02:41Z

Rename CONFIG_PBLRCW_CONFIG and CONFIG_PBLRCW_CONFIG. Also add their details in README. Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun

kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX

2013-12-13T14:15:32Z

The last users of CONFIG_KGDB_SER_INDEX were removed more than 3 years ago in commits 550650ddd0 and bf16500f79, either kgdb subsystem should care about this parameter or it should be gone completely. Signed-off-by: Vladimir Zapolskiy