u-boot.git/include/configs/devkit3250.h, branch v2016.03

lpc32xx: devkit3250: update board configuration file

2016-01-14T02:05:24+00:00

The change updates DevKit3250 board powerd by NXP LPC3250 SoC:
* due to increased resulting U-boot image size give more space to
  store loaded and relocated versions,
* add DMA support, which is used by NAND SLC driver,
* add NXP OHCI and PHY drivers to the image,
* add USB, JFFS and FAT commands.

Signed-off-by: Vladimir Zapolskiy

common: add CMD_GPIO to Kconfig

2015-11-18T19:50:06+00:00

Add CMD_GPIO to Kconfig and run tools/moveconfig.py .

Signed-off-by: Thomas Chou 
Reviewed-by: Simon Glass

lpc32xx: move common SLC NAND defines to arch/config.h

2015-08-18T17:45:55+00:00

A number of LPC32xx SLC NAND defines is dictated by controller
hardware limits and OOB layout is defined by operating system, the
definitions are common for all users. Since those macro are used
in out of NAND SLC driver code (simple NAND SPL framework), they can
not be placed into the driver, therefore move them from board config
files to arch/config.h

The change also adds OOB layout details specific to small page NAND
devices taken from Linux kernel.

Signed-off-by: Vladimir Zapolskiy 
Tested-by: Sylvain Lemieux

lpc32xx: devkit3250: add spl build support

2015-08-13T00:47:34+00:00

The change adds SPL build support to Timll DevKit3250 board, the
generated SPL image can be uploaded over UART5, JTAG or stored on
NAND. SPL is designed to load U-boot image from NAND.

All new NAND chip defines in board configuration are needed by
SPL NAND "simple" framework, the framework is used to reduce
potentially duplicated code from LPC32xx SLC NAND driver.

Signed-off-by: Vladimir Zapolskiy

lpc32xx: devkit3250: update of board configuration

2015-08-13T00:47:34+00:00

This change adds more peripherals to Timll DevKit3250 board, namely
MAC and SMSC phy, SLC NAND, GPIO, SPI and I2C.

Also the default serial console is changed to UART5, added an option
to pass device tree blob by means of bootm, predefined environment
variables are slightly extended and reserved space on NAND to store
user defined U-boot environment.

Signed-off-by: Vladimir Zapolskiy

Move defaults from config_cmd_default.h to Kconfig

2015-06-26T02:18:34+00:00

This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger 
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini

sizes.h - consolidate for all architectures

2014-03-04T17:15:01+00:00

Copied from Linux sources "include/linux/sizes.h" commit
413541dd66d51f791a0b169d9b9014e4f56be13c

Signed-off-by: Alexey Brodkin 

Cc: Vineet Gupta 
Cc: Tom Rini 
Cc: Stefan Roese 
Cc: Albert Aribaud 
Acked-by: Tom Rini 
Acked-by: Stefan Roese 
[trini: Add bcm Kona platforms to the patch]
Signed-off-by: Tom Rini

configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE

2014-02-19T16:10:05+00:00

CONFIG_SYS_GBL_DATA_SIZE is not used any more.
The size of struct "global_data" is automatically calculated
by asm-offsets. (See lib/asm-offsets.c)

GENERATED_GBL_DATA_SIZE should be used instead of
CONFIG_SYS_GBL_DATA_SIZE.

Signed-off-by: Masahiro Yamada

config: Add a default CONFIG_SYS_PROMPT

2013-11-04T16:02:14+00:00

The definitions for CONFIG_SYS_PROMPT are varied with little reason other
than to display the board name. Over half the definitions are "==> ", so
make this the default. The rest of the boards remain unchanged to avoid
breaking any external scripts expecting a certain prompt.

Signed-off-by: Rob Herring 
Reviewed-by: Fabio Estevam

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini