u-boot.git/include/configs/devkit8000.h, branch v2012.10-rc2

SPL: Move the omap SPL framework to common/spl

2012-09-27T16:49:59+00:00

Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL
framework, enable on all of the previously using boards.  We move the
spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/.  We leave
the NAND one in-place as we plan to replace it later in this series.

We use common/spl to avoid linker problems with respect to merging
constant strings in objects.   Otherwise all strings in common/ will be
linked in and kept which grows SPL in size too much.

Signed-off-by: Tom Rini

ARM: Remove unused stack and irq config defines

2012-09-01T12:58:22+00:00

CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present
in most ARM board config files.

IRQs are only enabled for 1 config, so remove the unused config options
for IRQ and FIQ stack size as well.

Cc: Albert ARIBAUD 
Signed-off-by: Rob Herring

dm: Move OMAP GPIO driver to drivers/gpio/

2012-09-01T12:58:13+00:00

Signed-off-by: Marek Vasut 
Cc: Wolfgang Denk 
Cc: Albert Aribaud 
Cc: U-Boot DM 
Cc: Tom Rini 
Acked-by: Tom Rini 
Signed-off-by: Tom Rini

dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP

2012-09-01T12:58:13+00:00

This fixes the breakage with SPL on most OMAP boards after the GPIO
driver was moved.

Signed-off-by: Marek Vasut 
Cc: Wolfgang Denk 
Cc: Albert Aribaud 
Cc: U-Boot DM 
Cc: Tom Rini 
Acked-by: Tom Rini 
Signed-off-by: Tom Rini

hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c

2012-06-20T18:36:51+00:00

Exactly one board has defined CONFIG_SYS_PROMPT_HUSH_PS2 to a value
different than "> " which is vision2.  I have Cc'd the maintainer here
as I strongly suspect this is a bug rather than intentional behavior.

Cc: Stefano Babic 
Signed-off-by: Tom Rini 
Acked-by: Stefano Babic

ARM: omap3: Set SPL stack size to 8KB, image to 54KB.

2012-05-15T06:31:41+00:00

With older toolchains it is possible to not fit entirely into the 45KB
that we had assigned to SPL.  Adjust to allow for 8KB of stack (which
should be more than required) and 54KB of text/data.

Cc: Vaibhav Hiremath 
Cc: Nagendra T S 
Cc: Thomas Weber 
Cc: Ilya Yanok 
Cc: Steve Sakoman 
Cc: Stefano Babic 
Signed-off-by: Tom Rini 
Acked-by: Stefano Babic 
Acked-by: Vaibhav Hiremath

devkit8000: Implement and activate direct OS boot

2012-03-27T20:05:28+00:00

- Implements spl_start_uboot() for devkit8000
- Add configs to activate direct OS boot from SPL

Signed-off-by: Simon Schwarz 
CC: Tom Rini 
CC: Stefano Babic 
CC: Wolfgang Denk

devkit8000: add config for spl command

2012-03-27T20:05:28+00:00

This adds some configs for devkit8000 to use the new spl command

Signed-off-by: Simon Schwarz 
CC: Tom Rini 
CC: Stefano Babic 
CC: Wolfgang Denk

nand_spl_simple: store ecc data on the stack

2012-01-26T22:06:21+00:00

Currently nand_spl_simple puts it's temp data at 0x10000 offset in SDRAM
which is likely to contain already loaded data.
The patch saves the oob data and the ecc on the stack replacing
the fixed address in RAM.

Signed-off-by: Stefano Babic 
CC: Ilya Yanok 
CC: Scott Wood 
CC: Tom Rini 
CC: Simon Schwarz 
CC: Wolfgang Denk 
Signed-off-by: Scott Wood

devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss

2011-12-06T22:59:41+00:00

This moves CONFIG_SYS_TEXT_BASE one MB after beginning of SD-RAM. Move
CONFIG_SYS_SPL_MALLOC_START to have one MB of free space for the u-boot
image.

CONFIG_SYS_TEXT_BASE was in the middle of the bss-section. This was the
reason for the problems with MMC boot described here:
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/118711

Signed-off-by: Simon Schwarz 
Tested-by: Thomas Weber 
Signed-off-by: Tom Rini