u-boot.git/include/configs/devkit8000.h, branch v2016.07 Unnamed repository; edit this file 'description' to name the repository. configs: Re-sync with cmd/Kconfig 2016-04-25T19:09:47+00:00 Tom Rini trini@konsulko.com 2016-04-24T21:29:26+00:00 89cb2b5f8be4f6d04bd87220aa8f72eb0850edc4 Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com> 
Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
include/configs: Whitespace fixup 2016-04-25T19:09:46+00:00 Tom Rini trini@konsulko.com 2016-04-24T14:24:59+00:00 cb04db155f4e7ccaec1b961d8a84e1a1b9524594 A number of moveconfig.py runs have left a instances of multiple empty lines in a row. Correct this to a single empty line. Signed-off-by: Tom Rini <trini@konsulko.com> 
A number of moveconfig.py runs have left a instances of multiple empty
lines in a row.  Correct this to a single empty line.

Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Re-sync almost all of cmd/Kconfig 2016-04-25T19:09:40+00:00 Tom Rini trini@konsulko.com 2016-04-22T20:41:25+00:00 78d1e1d0a157c8b48ea19be6170b992745d30f38 This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com> 
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini <trini@konsulko.com>
common: add CMD_GPIO to Kconfig 2015-11-18T19:50:06+00:00 Thomas Chou thomas@wytron.com.tw 2015-11-11T13:39:33+00:00 e4aa8edb6e5cae256a5c5a3c5cd30e05e8f5a2b4 Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> 
Add CMD_GPIO to Kconfig and run tools/moveconfig.py .

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
ti: drop value from CONFIG_SYS_NAND_BUSWIDTH_16BIT 2015-08-13T00:47:45+00:00 Stefano Babic sbabic@denx.de 2015-07-26T13:18:15+00:00 55f1b39f7390a0d43146935da0ce99a02a64940c Signed-off-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> 
Signed-off-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Move defaults from config_cmd_default.h to Kconfig 2015-06-26T02:18:34+00:00 Joe Hershberger joe.hershberger@ni.com 2015-06-22T21:15:30+00:00 ef0f2f57524ec85fb9058a23298f2c4995e0d950 This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com> 
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini <trini@konsulko.com>
ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04T19:55:04+00:00 Simon Glass sjg@chromium.org 2015-03-03T15:03:02+00:00 7ae8350f67eea861280a4cbd2d067777a0e87153 Currently in some cases SDRAM init requires global_data to be available and soon this will not be available prior to board_init_f(). Adjust the code paths in these cases to be correct. In some cases we had the SPL stack be in DDR as we might have large stacks (due to Falcon Mode + Environment). In these cases switch to CONFIG_SPL_STACK_R. In other cases we had simply been setting CONFIG_SPL_STACK into SRAM. In these cases we no longer need to (CONFIG_SYS_INIT_SP_ADDR is used and is also in SRAM) so drop those lines. Signed-off-by: Simon Glass <sjg@chromium.org> Tested on Beagleboard, Beagleboard xM Tested-by: Matt Porter <mporter@konsulko.com> Tested on Beaglebone Black, AM43xx GP EVM, OMAP5 uEVM, OMAP4 Pandaboard Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Currently in some cases SDRAM init requires global_data to be available
and soon this will not be available prior to board_init_f().  Adjust the
code paths in these cases to be correct.  In some cases we had the SPL
stack be in DDR as we might have large stacks (due to Falcon Mode +
Environment).  In these cases switch to CONFIG_SPL_STACK_R.  In other
cases we had simply been setting CONFIG_SPL_STACK into SRAM.  In these
cases we no longer need to (CONFIG_SYS_INIT_SP_ADDR is used and is also
in SRAM) so drop those lines.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested on Beagleboard, Beagleboard xM
Tested-by: Matt Porter <mporter@konsulko.com>
Tested on Beaglebone Black, AM43xx GP EVM, OMAP5 uEVM, OMAP4 Pandaboard
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
arm: omap3: devkit8000: inherit from ti_omap3_common.h 2015-01-13T20:26:11+00:00 Anthoine Bourgeois anthoine.bourgeois@gmail.com 2015-01-01T23:35:43+00:00 a91ef4adfb5a4b21ebf37dffcb6c6e485c75685b Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> 
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
arm: omap3: devkit8000: inherit from ti_armv7_common.h 2015-01-13T20:26:10+00:00 Anthoine Bourgeois anthoine.bourgeois@gmail.com 2015-01-01T23:35:42+00:00 875e4154921dcbd211c07316239121a97e9c74be 






devkit8000: convert to use generic board code
2015-01-05T18:48:21+00:00

Anthoine Bourgeois
anthoine.bourgeois@gmail.com

2014-12-24T00:11:49+00:00

c313c031cf943aea3e70c40b2c673f03e77859e0

Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>





Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>