u-boot.git/include/configs/dra7xx_evm.h, branch u-boot-2016.09.y

configs: Migrate CONFIG_USB_STORAGE

2016-09-09T18:59:35+00:00

In some cases we were missing CONFIG_USB=y so enable that when needed.

Reviewed-by: Masahiro Yamada 
Signed-off-by: Tom Rini

TI: Rework SRAM definitions and maximums

2016-09-06T17:41:42+00:00

On all TI platforms the ROM defines a "downloaded image" area at or near
the start of SRAM which is followed by a reserved area.  As it is at
best bad form and at worst possibly harmful in corner cases to write in
this reserved area, we stop doing that by adding in the define
NON_SECURE_SRAM_IMG_END to say where the end of the downloaded image
area is and make SRAM_SCRATCH_SPACE_ADDR be one kilobyte before this.
At current we define the end of scratch space at 0x228 bytes past the
start of scratch space this this gives us a lot of room to grow.  As
these scratch uses are non-optional today, all targets are modified to
respect this boundary.

Tested on OMAP4 Pandaboard, OMAP3 Beagle xM

Cc: Albert Aribaud 
Cc: Nagendra T S 
Cc: Vaibhav Hiremath 
Cc: Lokesh Vutla 
Cc: Felipe Balbi 
Cc: Igor Grinberg 
Cc: Nikita Kiryanov 
Cc: Paul Kocialkowski 
Cc: Enric Balletbo i Serra 
Cc: Adam Ford 
Cc: Steve Sakoman 
Cc: Stefan Roese 
Cc: Thomas Weber 
Cc: Hannes Schmelzer 
Cc: Thomas Chou 
Cc: Masahiro Yamada 
Cc: Simon Glass 
Cc: Joe Hershberger 
Cc: Sam Protsenko 
Cc: Heiko Schocher 
Cc: Samuel Egli 
Cc: Michal Simek 
Cc: Wolfgang Denk 
Cc: Mateusz Kulikowski 
Cc: Ben Whitten 
Cc: Stefano Babic 
Cc: Bin Meng 
Cc: Sekhar Nori 
Cc: Mugunthan V N 
Cc: "B, Ravi" 
Cc: "Matwey V. Kornilov" 
Cc: Ladislav Michl 
Cc: Ash Charles 
Cc: "Kipisz, Steven" 
Cc: Daniel Allred 
Signed-off-by: Tom Rini 
Tested-by: Lokesh Vutla 
Acked-by: Lokesh Vutla 
Tested-by: Ladislav Michl

usb: add (move) CONFIG_USB_HOST to Kconfig

2016-08-07T19:55:42+00:00

The meaning of CONFIG_USB in U-Boot is different from that in Linux.

As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the
USB host controller support, while CONFIG_USB_SUPPORT is used to
enable the whole of the USB sub-system.

When I added CONFIG_USB into Kconfig by commit 6e7e9294d321 ("usb:
add basic USB configs in Kconfig"), I planned to follow the Linux's
convention, i.e. CONFIG_USB to enable/disable the USB host support.

Then, commit 68f7c5db2d1e ("usb: Generic USB Kconfig option, that
fits both host and gadget and comments") changed the logic of the
CONFIG_USB to point to the whole of the USB sub-system.  As a result,
currently we do not have an option for USB host.

This commit adds CONFIG_USB_HOST, which will be useful to compile
in the USB host support code.

CONFIG_USB_HOST is not referenced at all, but strangely some boards
define it in board headers.  I removed them because USB_HOST will be
selected in Kconfig going forward.

Signed-off-by: Masahiro Yamada

treewide: move CONFIG_PHYS_64BIT to Kconfig

2016-08-05T11:27:25+00:00

We need to ensure that CONFIG_PHYS_64BIT is configured via Kconfig so
that it is always available to the build system.  Otherwise we can run
into cases where we have inconsistent sizes of certain attributes.

Ravi Babu reported offset mismatch of struct dwc3 across files since
commit 95ebc253e6d4 ("types.h: move and redefine resource_size_t").
Since the commit, resource_addr_t points to phys_addr_t, whose size
is dependent on CONFIG_PHYS_64BIT for ARM architecture.

I tried my best to use "select" where possible (for example, ARMv8
architecture) because I think this kind of option is generally user-
unconfigurable.  However, I see some of PowerPC boards have 36BIT
defconfigs as well as 32BIT ones.  I moved CONFIG_PHYS_64BIT to the
defconfigs for such boards.

CONFIG_36BIT is no longer referenced, so all of the defines were
removed from CONFIG_SYS_EXTRA_OPTIONS.

Fixes: 95ebc253e6d4 ("types.h: move and redefine resource_size_t")
Signed-off-by: Masahiro Yamada 
Reported-by: Ravi Babu 
Acked-by: Stefan Roese 
Reviewed-by: Tom Rini 
Reviewed-by: York Sun

configs: dra7xx: Update QSPI speed to 76.8MHz

2016-07-29T18:45:00+00:00

Now that QSPI driver can support 76.8MHz, update the
CONFIG_SF_DEFAULT_SPEED to the same value.

Signed-off-by: Vignesh R 
Reviewed-by: Tom Rini 
Reviewed-by: Jagan Teki 
Reviewed-by: Mugunthan V N

usb: move CONFIG_USB_XHCI_DWC3 to Kconfig

2016-06-03T22:43:53+00:00

Create an entry for "config USB_XHCI_DWC3" in Kconfig and
switch over to it for all boards.

Signed-off-by: Masahiro Yamada

usb: move CONFIG_USB_XHCI to Kconfig with renaming

2016-06-03T22:43:53+00:00

Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it
into CONFIG_USB_XHCI_HCD.

As commented in the help of "config USB_XHCI" entry, this has been
a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI
have been unified in favor of the former.

Note:
Some boards define CONFIG_USB_XHCI in their headers without
CONFIG_USB, which does not meet the "depends on" in Kconfig.
I added CONFIG_USB=y for those boards when converting.
Otherwise, they would fail to build.

Signed-off-by: Masahiro Yamada

dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI

2016-05-17T15:54:43+00:00

This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.

Signed-off-by: Simon Glass

configs: Re-sync with cmd/Kconfig

2016-04-25T19:09:47+00:00

Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini

configs: Re-sync almost all of cmd/Kconfig

2016-04-25T19:09:40+00:00

This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini