u-boot.git/include/configs/efikamx.h, branch master

efikamx: move and rename Efika MX directories and config files to prepare for new boards

2012-09-01T12:58:29+00:00

* Move Efika MX Smarttop and Smartbook boards into a "genesi" vendor directory
* Rename efikamx -> mx51_efikamx since there is an mx53_efikamx and mx6_efikamx to come

Signed-off-by: Matt Sealey 
Acked-by: Stefano Babic 
Acked-by: Stefano Babic

ARM: Remove unused stack and irq config defines

2012-09-01T12:58:22+00:00

CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present
in most ARM board config files.

IRQs are only enabled for 1 config, so remove the unused config options
for IRQ and FIQ stack size as well.

Cc: Albert ARIBAUD 
Signed-off-by: Rob Herring

hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c

2012-06-20T18:36:51+00:00

Exactly one board has defined CONFIG_SYS_PROMPT_HUSH_PS2 to a value
different than "> " which is vision2.  I have Cc'd the maintainer here
as I strongly suspect this is a bug rather than intentional behavior.

Cc: Stefano Babic 
Signed-off-by: Tom Rini 
Acked-by: Stefano Babic

CONFIG_SYS_BAUDRATE_TABLE: Add , place there

2012-06-20T18:26:16+00:00

We provide a default table of { 9600, 19200, 38400, 57600, 115200 }
in  which mkconfig places after  in
the generated config file.  This is used when a board has not set its
own table.

Signed-off-by: Tom Rini

configs: imx: Use CONFIG_SF_DEFAULT_CS

2012-03-27T07:41:17+00:00

CONFIG_SPI_FLASH_CS is not used anywhere.

Use CONFIG_SF_DEFAULT_CS instead.

Signed-off-by: Fabio Estevam 
Acked-by: Marek Vasut 
Acked-by: Stefano Babic

efikamx: Fix CONFIG_SYS_MEMTEST_END

2012-03-27T07:41:15+00:00

CONFIG_SYS_MEMTEST_END should be higher than CONFIG_SYS_MEMTEST_START.

Cc: Marek Vasut 
Signed-off-by: Fabio Estevam 
Acked-by: Marek Vasut 
Tested-by: Marek Vasut

configs: Remove CONFIG_NET_MULTI from board files

2012-02-12T09:11:26+00:00

CONFIG_NET_MULTI is not used anymore, so remove it from board files.

Cc: Marek Vasut 
Cc: Stefano Babic 
Cc: Kumar Gala 
Cc: Sandeep Paulraj 
Signed-off-by: Fabio Estevam 
Acked-by: Tom Rini 
Acked-by: Mike Frysinger 
Acked-by: Marek Vasut 
Acked-by: Heiko Schocher 
Acked-by: Kumar Gala 
Acked-by: Stefano Babic 
Tested-by: Marek Vasut 
Tested-by: Heiko Schocher

USB: efikamx: Enable USB on EfikaMX and EfikaSB

2011-12-11T13:50:14+00:00

Signed-off-by: Marek Vasut 
Cc: Stefano Babic 
Cc: Remy Bohmer 
Cc: Wolfgang Grandegger 
Cc: Jason Liu

MX: serial_mxc: cleanup removing nasty #ifdef

2011-12-06T22:59:40+00:00

The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS__
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.

Signed-off-by: Stefano Babic 
CC: Marek Vasut 
CC: Wolfgang Denk 
CC: Fabio Estevam 
CC: Helmut Raiger 
CC: John Rigby 
CC: Matthias Weisser 
CC: Jason Liu 
Acked-by: Jason Liu

rtc: Make mc13783-rtc driver generic

2011-11-03T21:56:19+00:00

Rename mc13783-rtc so that it can be used for both MC13783 and MC13892 PMICs.

efikamx board, for example, does use a MC13892 PMIC, but the RTC selection is currently made as:

#define CONFIG_RTC_MC13783

,which is not very obvious.

Let the MC13783 and MC13892 RTC be selected by:

#define CONFIG_RTC_MC13XXX

Signed-off-by: Fabio Estevam 
Acked-by: Stefano Babic