u-boot.git/include/configs/evb_rk3399.h, branch main

rockchip: include: configs: Remove unused SDRAM_BANK_SIZE

2023-03-19T05:20:21Z

Remove unused SDRAM_BANK_SIZE define. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang

Convert CONFIG_USB_OHCI_NEW et al to Kconfig

2022-07-07T13:29:08Z

This converts the following to Kconfig: CONFIG_SYS_OHCI_SWAP_REG_ACCESS CONFIG_SYS_USB_OHCI_CPU_INIT CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS CONFIG_SYS_USB_OHCI_SLOT_NAME CONFIG_USB_ATMEL CONFIG_USB_ATMEL_CLK_SEL_PLLB CONFIG_USB_ATMEL_CLK_SEL_UPLL CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW Signed-off-by: Tom Rini

ARM64: rockchip: evb_rk3399: add usb ohci definations

2021-06-18T06:37:07Z

Problem: USB2.0 port can recognize any USB1.1 devices (like usb keyboard) Add missed USB OHCI configuration USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Human Interface (1.5 Mb/s, 100mA) Dell KB216 Wired Keyboard Signed-off-by: Artem Lapkin Reviewed-by: Kever Yang

Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig

2020-08-08T15:03:52Z

This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini

rockchip: Enable HDMI output on rk3399 board w/ HDMI

2020-04-02T13:50:25Z

Enable config options and console setting to respective rk3399 board for HDMI output. Boards supported and tested on this patch are: - NanoPc T4 - NanoPi M4 - NanoPi Neo4 - ROC-RK3399-PC - Rock960 Cc: Manivannan Sadhasivam Signed-off-by: Jagan Teki Tested-by: Peter Robinson Reviewed-by: Kever Yang

rk3399: Check MMC env while defining it

2020-01-30T03:44:01Z

rk3399 do support SPI flash as well, so there is a possibility of using flash environment for those usecases. So define env device for MMC only when it is used by specific configuration. Signed-off-by: Jagan Teki Reviewed-by: Kever Yang

evb_rk3399: revert CONFIG_SYS_MMC_ENV_DEV to 0

2019-08-23T10:15:31Z

This was changed to 1 in commit 0717dde057e, but a few months later, commit 5f9411af37b swapped the order of eMMC and SD card by assigning indexed aliases to `&sdhci` and `&sdmmc`. Signed-off-by: Max Kellermann Reviewed-by: Kever Yang (Add signature) Signed-off-by: Kever Yang

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSET

2017-09-30T22:33:34Z

CONFIG_ENV_OFFSET is already defined in include/configs/rockchip-common.h For CONFIG_ROCKCHIP_BACK_TO_BROM=y we redefine CONFIG_ENV_OFFSET to an unsuitable value. We were lucky to get a compiler warning. Remove the incorrect redefinition. Signed-off-by: Heinrich Schuchardt Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich

Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

2017-07-26T01:08:01Z

This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass Signed-off-by: Tom Rini