u-boot.git/include/configs/kmtegr1.h, branch master

powerpc: remove support for kmtergr1 and MPC8309

2022-08-21T02:45:00+00:00

The kmtegr1 board is out of maintenance and can be removed. As it is the
only board in the tree using MPC8309 the support for this CPU is dropped
completely.

Signed-off-by: Holger Brunck

board/km: remove CONFIG_KM_BOARD_NAME

2019-12-23T08:36:47+00:00

We can use the existing CONFIG_SYS_CONFIG_NAME define for that and
remove the option. Also fix the boot string for all km83xx boards.

Signed-off-by: Holger Brunck 
Reviewed-by: Priyanka Jain 
CC: Priyanka Jain 
CC: Valentin Longchamp

ppc/km/tegr1: support second localbus clock signal

2019-12-23T08:36:47+00:00

On kmtegr1 we have to specify the second localbus clock signal also
instead of using the default for our ppc 8309 boards.

Signed-off-by: Holger Brunck 
Reviewed-by: Priyanka Jain 
CC: Priyanka Jain 
CC: Valentin Longchamp

env: Finish migration of common ENV options

2019-11-20T23:32:09+00:00

- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk 
Cc: Joe Hershberger 
Cc: Patrick Delaunay 
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini 
Acked-by: Joe Hershberger 
Reviewed-by: Simon Goldschmidt

keymile: Factor out common includes again

2019-05-21T05:52:34+00:00

Not that the Kconfig conversion of a lot of variables is done, we can
factor out the common include files for the keymile boards again (which
now contain hardly any #ifdef logic at all).

Signed-off-by: Mario Six

keymile: Remove CONFIG_SYS_APP{1, 2}_{BASE, SIZE}

2019-05-21T05:52:34+00:00

CONFIG_SYS_APP1_BASE, CONFIG_SYS_APP2_BASE, CONFIG_SYS_APP1_SIZE, and
CONFIG_SYS_APP2_SIZE are no longer used in the keymile config files
(they were used for setting values, which were converted to Kconfig
earlier in the series).

Remove them from the configs and the whitelist.

Signed-off-by: Mario Six

mpc83xx: Get rid of CONFIG_SYS_LBC_*

2019-05-21T05:52:33+00:00

Except for one counter example, CONFIG_SYS_LBC_LBCR always has a value
of either 0x00040000 or 0x00000000.

CONFIG_SYS_LBC_MRTPR always has the value 0x20000000.

CONFIG_SYS_LBC_LSDMR_{1,2,4,5} are not set for any mpc83xx board.

CONFIG_SYS_LBC_LSRT is set by one board (to 0x32000000).

To simplify the configuration files, hardcode the setting of these
values for mpc83xx.

Signed-off-by: Mario Six

mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE

2019-05-21T05:52:33+00:00

CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as
CONFIG_SYS_SDRAM_BASE on all existing boards. Just use
CONFIG_SYS_SDRAM_BASE instead.

Signed-off-by: Mario Six

mpc83xx: Get rid of CONFIG_SYS_DDR_BASE

2019-05-21T05:52:33+00:00

CONFIG_SYS_DDR_BASE is specific to mpc83xx an is always set to the same
value as CONFIG_SYS_SDRAM_BASE. Just use CONFIG_SYS_SDRAM_BASE instead.

Signed-off-by: Mario Six

mpc83xx: Migrate CONFIG_LCRR_* to Kconfig

2019-05-21T05:52:33+00:00

Migrate the CONFIG_LCRR_* settings to Kconfig.

Signed-off-by: Mario Six