u-boot.git/include/configs/ls2085a_common.h, branch master

armv8: LS2080A: Rename LS2085A to reflect LS2080A

2015-11-30T16:53:04+00:00

LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)

Signed-off-by: Pratiyush Mohan Srivastava 
Signed-off-by: Prabhakar Kushwaha 
[York Sun: Dropped #ifdef in cpu.c for cpu_type_list]
Reviewed-by: York Sun

ns16550: move CONFIG_SYS_NS16550 to Kconfig

2015-11-22T02:50:18+00:00

Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py.

Signed-off-by: Thomas Chou

armv8/fsl_lsch3: Change arch to fsl-layerscape

2015-10-29T17:34:00+00:00

There are two LS series processors are built on ARMv8 Layersacpe
architecture currently, LS2085A and LS1043A. They are based on
ARMv8 core although use different chassis, so create fsl-layerscape
to refactor the common code for the LS series processors which also
paves the way for adding LS1043A platform.

Signed-off-by: Mingkai Hu 
Signed-off-by: Hou Zhiqiang 
Signed-off-by: Gong Qianyu 
Reviewed-by: York Sun

arm/fsl-ls: Add CONFIG_OF_STDOUT_VIA_ALIAS

2015-10-26T16:09:54+00:00

This will allow OF-based earlycon to be used once the appropriate
aliases are added to the device tree and kernel support is fixed.

Signed-off-by: Scott Wood 
Reviewed-by: York Sun

arm, powerpc: select SYS_GENERIC_BOARD

2015-10-24T17:50:38+00:00

We have finished Generic Board conversion for ARM and PowerPC, i.e.
all the boards have been converted except OpenRISC, SuperH, SPARC,
which have not supported Generic Board framework yet.

Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
defines in include/configs/*.h.

Signed-off-by: Masahiro Yamada

I2C: mxc_i2c: make I2C1 and I2C2 optional

2015-10-02T08:42:31+00:00

The driver assumed that I2C1 and I2C2 were always enabled,
and if they were not, then an asynchronous abort was (silently)
raised, to be caught much later on in the Linux kernel.

Fix this by making I2C1 and I2C2 optional just like I2C3 and I2C4
are.

To make the change binary-invariant, declare I2C1 and I2C2 in
every include/configs/ file which defines CONFIG_SYS_I2C_MXC.

Also, while updating README about CONFIG_SYS_I2C_MXC_I2C1 and
CONFIG_SYS_I2C_MXC_I2C2, add missing descriptions for I2C4 speed
(CONFIG_SYS_MXC_I2C4_SPEED) and slave (CONFIG_SYS_MXC_I2C4_SLAVE)
config options.

Signed-off-by: Albert ARIBAUD (3ADEV)

armv8: ls2085a: Add support of CONFIG_CMD_GREPENV

2015-09-02T02:38:18+00:00

Enable CONFIG_CMD_GREPENV to allow search in env variables

Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun

armv8: ls2085a: Update bootargs as per default target console

2015-09-02T02:38:11+00:00

LS2085 targets supports following UART console
 LS2085AQDS	UART0
 LS2085ARDB	UART1
 LS2085ASim	UART0
 LS2085AEmu	UART0

So update the bootargs as per the default console present at the target

Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun

kconfig: add config option for shell prompt

2015-08-13T11:19:33+00:00

Add option to set shell prompt string from menuconfig and migrate
boards globally.

The migration is done as follows:
- Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
  entry moved to their defconfig files.
- Boards that defined some kind of #ifdef logic which selects the
  CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
  right before the #ifdef logic and were left alone.
- This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
  CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
  files. This results in a streamlined default value across platforms, and
  includes the following files: spear-common, sunxi-common, mv-common,
  ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
- Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
  not updated in their respective defconfig files under the assumption that
  since they did not explicitly define a value, they're fine with whatever
  the default is.
- On the other hand, boards that relied on a value defined in some
  _common.h file such as woodburn_common, rpi-common,
  bur_am335x_common, ls2085a_common, siemens_am33x_common, and
  omap3_evm_common, had their values moved to the respective defconfig files.
- The define V_PROMPT was removed, since it is not used anywhere except for
  assigning a value for CONFIG_SYS_PROMPT.

Cc: Tom Rini 
Cc: Masahiro Yamada 
Cc: Stefano Babic 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
[trini: Add spring, sniper, smartweb to conversion]
Signed-off-by: Tom Rini

board/ls2085a: Increase kernel_size value in env variable

2015-07-20T18:44:38+00:00

Linux itb image size has been increased from 30MB.

So updating kernel_size to 40MB in env variable.

Signed-off-by: Prabhakar Kushwaha 
Reviewed-by: York Sun