u-boot.git/include/configs/lx2160a_common.h, branch main

board: nxp: lx2160a: without QIXIS, MC-ENET, PCI, LTC3882

2026-05-15T11:28:31Z

The shared LX2160A board file calls helpers that only exist when their subsystem is enabled. Gate them on the matching CONFIG_*: - pci_init() under CONFIG_PCI. - fdt_fixup_mc_ddr() and fsl_rgmii_init() under CONFIG_FSL_MC_ENET. - qixis_*() and the QIXIS branch of checkboard() under CONFIG_FSL_QIXIS; cpu_name(buf) moves out so the non-QIXIS path still prints "Board: ". - EVENT_SPY_SIMPLE on init_func_vid moves inside the CONFIG_VOL_MONITOR_LTC3882_READ guard (was outside, dangling symbol when LTC3882 off). #if / #ifdef, not IS_ENABLED(), because the helpers are themselves conditionally compiled. While here, lx2160a_common.h: fix BOOT_TARGET_DEVICES_MMC 1 arg vs 2 args and gate the MMC target on CONFIG_CMD_MMC, not CONFIG_MMC. No functional change for NXP boards: LX2160ARDB, LX2160AQDS, or LX2162AQDS, but mainly build clean up in order to support other NXP lx2160a boards without those HW dependencies. Signed-off-by: Vincent Jardin Signed-off-by: Peng Fan

lx2160ardb: add env variables to assist boot

2026-04-09T18:17:28Z

Update the console baudrate to 115200 as default. Also add env variables to assist boot process. Signed-off-by: Chunguang Li Signed-off-by: Peng Fan

configs: Remove duplicate newlines

2024-07-05T19:57:01Z

Drop all duplicate newlines from config headers. No functional change. Signed-off-by: Marek Vasut

global: Migrate CONFIG_PL01x_PORTS to CFG

2022-12-23T15:14:51Z

Perform a simple rename of CONFIG_PL01x_PORTS to CFG_PL01x_PORTS Signed-off-by: Tom Rini

global: Migrate CONFIG_PL011_CLOCK to CFG

2022-12-23T15:14:51Z

Perform a simple rename of CONFIG_PL011_CLOCK to CFG_PL011_CLOCK Signed-off-by: Tom Rini

ddr: fsl: Remove CONFIG_MEM_INIT_VALUE

2022-12-22T15:31:48Z

The way all of the memory init code here works is that we pass 0xDEADBEEF around for the initial value (as it's a well known 'poison' value and so easily recognized in debuggers, etc). The only point of this CONFIG symbol was to pass in a different value for that purpose. Drop this symbol and cleanup the code slightly. Signed-off-by: Tom Rini

global: Remove unused CONFIG symbols

2022-12-22T15:31:48Z

This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini

Convert CONFIG_RTC_DS1337 et al to Kconfig

2022-12-05T21:08:37Z

This converts the following to Kconfig: CONFIG_RTC_DS1337 CONFIG_RTC_DS1337_NOOSC CONFIG_RTC_DS1338 CONFIG_RTC_DS1374 CONFIG_RTC_DS3231 CONFIG_RTC_MC13XXX CONFIG_RTC_MXS CONFIG_RTC_PT7C4338 Signed-off-by: Tom Rini

Convert CONFIG_HWCONFIG to Kconfig

2022-12-05T21:07:12Z

This converts the following to Kconfig: CONFIG_HWCONFIG Signed-off-by: Tom Rini

global: Move remaining CONFIG_SYS_* to CFG_SYS_*

2022-12-05T21:06:08Z

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini Reviewed-by: Simon Glass