u-boot.git/include/configs/microblaze-generic.h, branch v2012.04

microblaze: Enable several ethernet driver compilation

2012-04-04T14:36:35+00:00

U-Boot's multipple network supports enables to use
several ethernet drivers but microblaze-generic
platform config file select only one driver.

Reported-by: Michal Simek 
Signed-off-by: Stephan Linz

microblaze: Enable phylib and mii support

2012-03-27T11:58:19+00:00

Enable phylib and mii support for AXI EMAC
ethernet drivers on Microblaze systems.

Signed-off-by: Stephan Linz 
Signed-off-by: Michal Simek

microblaze: Enable TFTP put command

2012-02-23T11:17:08+00:00

Signed-off-by: Stephan Linz

microblaze: usable uart16550 for big endian systems

2011-11-27T14:49:48+00:00

As a result of the commit 6833260 the uart16550 driver
is broken for Microblaze big endian systems, because of
the missing 3 byte offset. Other than as described, not
all U-Boot BSP will treat properly the 3 byte offset.

This why prefer to mask out the 3 byte offset in general
and setup correct _REG_SIZE value depending on edianess.

Signed-off-by: Stephan Linz 
Tested-by: Michal Simek

microblaze: Wire up axi_ethernet driver initialization

2011-10-24T05:50:21+00:00

Initialize axi_ethernet driver.

Signed-off-by: Michal Simek

board configs: drop NET_MULTI references

2011-10-05T20:22:16+00:00

Now that none of the core checks CONFIG_NET_MULTI, there's not much point
in boards defining it.  So scrub all references to it.

Signed-off-by: Mike Frysinger

microblaze: Enable FDT/FIT support

2011-10-03T06:01:56+00:00

Enable FDT and FIT support.

Signed-off-by: Michal Simek

microblaze: Remove address offset for uart16550

2011-10-03T06:01:56+00:00

U-Boot BSP handle 0x3 offset for big endian systems.
Little endian Microblaze systems don't use any offset.

Signed-off-by: Michal Simek

microblaze: Do not select NFS for platforms without ethernet

2011-10-03T06:01:56+00:00

Undefined network functionality for systems without ethernet
and disable NFS support.

Signed-off-by: Michal Simek

microblaze: Fix bd_info pointer

2011-01-10T07:52:32+00:00

Patch "Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value"
(sha1: 25ddd1fb0a2281b182529afbc8fda5de2dc16d96)
introduce GENERATED_GBL_DATA_SIZE which is sizeof aligned gd_t
(currently 0x40).
Microblaze configs used 0x40(128) because this place also contained
board info structure which lies on the top of ram.

U-Boot is placed to the top of the ram (for example 0xd7ffffff)
and bd structure was moved out of ram.

This patch is fixing this scheme with GENERATED_BD_INFO_SIZE
which swap global data and board info structures.

For example:
Current: gd 0xd7ffffc0, bd 0xd8000000
Fixed:   gd 0xd7ffffc0, bd 0xd7ffff90

Signed-off-by: Michal Simek