u-boot.git/include/configs/motionpro.h, branch v1.3.2

Motion-PRO: Update configuration to accomodate next generation board.

2007-10-23T11:14:10+00:00

New board has faster oscillator and a different Flash chip. This affects:
- CFG_MPC5XXX_CLKIN
- SDRAM timings
- Flash CS configuration (timings)
- Flash sector size, and thus MTD partition layout
- malloc() arena size (due to bigger Flash sectors)
- smaller memory test range (due to bigger malloc() arena)

This patch also enables more extensive memory testing via "mtest".

Signed-off-by: Bartlomiej Sieka

Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT

2007-09-06T15:46:23+00:00

Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200

Tested on: lite5200b

Note: the fixup functions have not been moved to a common place.  This
patch is targeted for immediate merging as in solves a build issue, but
the final name/location of the fixups is still subject to debate.  I
propose to merge this now, and move the fixups in the next merge window
to be usable by all targets.

Signed-off-by: Grant Likely

fdt: remove unused OF_FLAT_TREE_MAX_SIZE references

2007-08-28T23:46:25+00:00

and make some minor corrections to the FDT part of the README.

Signed-off-by: Kim Phillips

include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.

2007-07-10T15:12:10+00:00

Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger

include/configs: Use new CONFIG_CMD_* in various m* named board config files.

2007-07-05T09:05:02+00:00

Signed-off-by: Jon Loeliger

Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.

2007-05-27T15:26:46+00:00

Signed-off-by: Bartlomiej Sieka

Motion-PRO: Add support for redundant environment.

2007-05-27T15:06:36+00:00

Enable redundant environment, add a MTD partition for it; also add env.
variable command for passing MTD partitions to the kernel command line.

Signed-off-by: Piotr Kruszynski 
Acked-by: Bartlomiej Sieka

Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.

2007-05-27T15:05:11+00:00

Allow passing longer command line to the kernel - useful especially
for passing MTD partition layout.

Signed-off-by: Piotr Kruszynski 
Acked-by: Bartlomiej Sieka

Motion-PRO: Update EEPROM's page write bits and write delay.

2007-05-27T15:03:37+00:00

Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
have a page write capability of two bytes", and "This device offers fast (1ms)
byte write". Add 3ms of extra delay.

Signed-off-by: Piotr Kruszynski 
Acked-by: Bartlomiej Sieka

MPC5XXX, Motion-PRO: Fix PHY initialization problem.

2007-05-27T14:58:45+00:00

After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
networking does not function. This commit switches PHY to TX mode by clearing
the FX_SEL bit of Mode Control Register. It also reverses commit
008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.

Signed-off-by: Grzegorz Bernacki 
Acked-by: Bartlomiej Sieka