u-boot.git/include/configs/mp2usb.h, branch v2009.08

rm9200 lowevel_init: don't touch reserved/readonly registers

2009-08-03T07:26:26+00:00

For some reason the AT91rm9200 lowlevel init writes to a bunch of
reserved or read-only addresses.  All the boards seem to define the
value-to-be-written values as zero ... but they shouldn't actually
be writing *anything* there.

No documented erratum justifies these accesses.  It looks like maybe
some pre-release BDI-2000 setup code has been carried along by cargo
cult programming since at least late 2004 (per GIT history).

Here's a patch disabling what seems to be bogosity.  Tested on a
csb337; there were no behavioral changes.

Signed-off-by: David Brownell 

on RM9200ek
Tested-by: Jean-Christophe PLAGNIOL-VILLARD

stdio/device: rework function naming convention

2009-07-17T22:27:46+00:00

So far the console API uses the following naming convention:

	======Extract======
	typedef struct device_t;

	int	device_register (device_t * dev);
	int	devices_init (void);
	int	device_deregister(char *devname);
	struct list_head* device_get_list(void);
	device_t* device_get_by_name(char* name);
	device_t* device_clone(device_t *dev);
	=======

which is too generic and confusing.

Instead of using device_XX and device_t we change this
into stdio_XX and stdio_dev

This will also allow to add later a generic device mechanism in order
to have support for multiple devices and driver instances.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD 

Edited commit message.

Signed-off-by: Wolfgang Denk

at91rm9200: move serial driver to drivers/serial

2009-04-04T18:42:20+00:00

add CONFIG_AT91RM9200_USART to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

Add "source" command; prepare removal of "autoscr" command

2009-04-03T20:01:42+00:00

According to the doc/feature-removal-schedule.txt, the "autoscr"
command will be replaced by the "source" command in approximately 6
months from now.

This patch prepares this change and starts a 6 month transition
period as follows:

- The new "source" command has been added, which implements exactly
  the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the
  new "source" command
- Related environment variables ("autoscript", "autoscript_uname")
  have *not* been adapted yet; these will be renamed resp. removed in
  a separate patch when the support for the "autoscr" command get's
  finally dropped.

Signed-off-by: Wolfgang Denk

usb.h: use standard __LITTLE_ENDIAN from Linux headers

2009-01-28T18:57:29+00:00

Rather than forcing people to define a custom "LITTLEENDIAN", just use the
__LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
already setting up.

Signed-off-by: Mike Frysinger 
Signed-off-by: Remy Bohmer

at91rm9200: rename lowlevel init value to CONFIG_SYS_

2009-01-06T20:37:39+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

at91rm9200: fix broken boot from nor flash

2008-11-24T21:10:04+00:00

This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
CONFIG_AT91RM9200 is defined and nor preloader is used.

Signed-off-by: Jens Scharsig

rename CFG_ macros to CONFIG_SYS

2008-10-18T19:54:03+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

rename CFG_ENV macros to CONFIG_ENV

2008-09-10T20:48:06+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH

2008-09-10T20:48:04+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD