u-boot.git/include/configs/mx28evk.h, branch v2014.01

mx28evk: Extend environment to easy write of NAND system

2014-01-03T14:44:05+00:00

This adds following new targets:

 - update_nand_kernel
 - update_nand_fdt
 - update_nand_filesystem

and to avoid confusion, the 'update_nand_full' has been renamed to
'update_nand_firmware_full'.

Signed-off-by: Otavio Salvador

mx28evk: Add 'nandboot' environment command

2014-01-03T14:44:05+00:00

This reads the kernel, ftd and boot into ubifs filesystem. While on
that, the SD firmware filename definition has been moved next to the
other SD related commands.

Signed-off-by: Otavio Salvador 
Reviewed-by: Fabio Estevam

mx28evk: Use 512k for fdt partition to align it

2014-01-03T14:44:05+00:00

Using 512k for fdt partition allow it to be aligned with the other
small partitions and 512k erase block size.

Signed-off-by: Otavio Salvador 
Acked-by: Stefano Babic

configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards

2013-11-13T09:09:09+00:00

There is no real benefit in adding the board name into U-boot's prompt, so
remove the custom CONFIG_SYS_PROMPT definitions so that the standard "=> "
prompt is used across FSL boards.

Signed-off-by: Fabio Estevam

Merge git://git.denx.de/u-boot-arm

2013-07-31T09:30:38+00:00

Conflicts:
	board/freescale/mx6qsabrelite/Makefile
	board/freescale/mx6qsabrelite/mx6qsabrelite.c
	include/configs/mx6qsabrelite.h

Signed-off-by: Stefano Babic

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

ARM: mxs: Consolidate configuration options

2013-07-24T10:59:57+00:00

Pull all the duplicate configuration options into configs/mxs.h
from the board configuration files. This reduces the files greatly
and makes them somewhat more readable. Besides, we do no longer
have such a horrible duplication of code.

Note that the mx23evk grew in size slightly. This is due to the
CONFIG_SYS_CBSIZE now being set to 1024 as it is on the rest of
MXS systems.

This patch also fixes the OCRAM size for i.MX23. The i.MX23 has
only 32kB of OCRAM, while i.MX28 has 128kB of OCRAM.

I verified the configuration didn't change for each of the boards,
but I didn't boot-test it on the boards I do not have. I configured
U-Boot for each board using the "make ... _config" command
and then ran "cpp -I include -dM include/config.h" , which dumped
all the configuration options. I did this both before and after this
patch and finally compared the results for each MXS board. Actually,
the results do differ slightly, since the configs/mxs.h file now
properly includes the correct iomux-mx23.h or iomux-mx28.h , so
while comparing, I had to ignore these new defines. These have no
impact on U-Boot configuration though.

Signed-off-by: Marek Vasut 
Cc: Fabio Estevam 
Cc: Lauri Hintsala 
Cc: Otavio Salvador 
Cc: Stefano Babic

mx28evk: Add splash screen support

2013-05-16T15:44:46+00:00

Enable display support.

Signed-off-by: Fabio Estevam

Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

2013-05-11T07:25:36+00:00

Conflicts:
	drivers/mtd/nand/mxc_nand_spl.c
	include/configs/m28evk.h

mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NAND

2013-05-01T20:41:10+00:00

The redundancy related defines are only correct for NAND, so guard all
of that area with CONFIG_ENV_IS_IN_NAND

Cc: Fabio Estevam 
Signed-off-by: Tom Rini