u-boot.git/include/configs/mx31pdk.h, branch v2011.06

mx31pdk: Add DHCP command

2011-06-21T20:26:21+00:00

Signed-off-by: Fabio Estevam

mx31pdk: Clean up mx31pdk.h file

2011-05-23T06:36:45+00:00

No need to use '#define SYMBOL 1' to make it active.

Signed-off-by: Fabio Estevam

Remove remnants of obsolete CONFIG_SYS_GBL_DATA_SIZE comments

2011-05-12T21:04:55+00:00

commit 25ddd1fb0a2281b182529afbc8fda5de2dc16d96 left remnants of
many comments about CONFIG_SYS_GBL_DATA_SIZE.

Signed-off-by: Michael Jones

MX31: mx31pdk: Add watchdog support

2011-05-11T21:03:15+00:00

Signed-off-by: Fabio Estevam

IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers

2011-04-27T17:38:05+00:00

As exception among the i.MX processors, the i.MX31 has headers
without general names (mx31-regs.h, mx31.h instead of imx-regs.h and
clock.h). This requires several nasty #ifdef in the drivers to
include the correct header. The patch cleans up the driver and
renames the header files as for the other i.MX processors.

Signed-off-by: Stefano Babic

mx31pdk: Make the full boot log visible

2011-02-21T07:30:54+00:00

Use board_early_init_f so that the full boot log output can be displayed.

Signed-off-by: Fabio Estevam

mx31pdk: Use the new relocation scheme

2011-02-21T07:30:54+00:00

Signed-off-by: Fabio Estevam

Drop support for CONFIG_SKIP_RELOCATE_UBOOT

2010-10-29T19:40:08+00:00

For ARM systems, before ELF relocation was introduced,
CONFIG_SKIP_RELOCATE_UBOOT coul be used to prevent *COPYING* the
U-Boot image from whereever it was loaded to it's link address
(CONFIG_SYS_TEXT_BASE).  The name was badly chosen, as no relocation
was performed at all, it was just a memcpy().

With ELF relocation, this does not work like that any more, and
related boards need to be fixed anyway.  So don't keep this relict any
longer.

Signed-off-by: Wolfgang Denk 
Tested-by: Heiko Schocher 
Tested-by: Reinhard Meyer

Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

2010-10-26T19:05:30+00:00

CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new  file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk 
Acked-by: Kumar Gala

MXC: Correct SPI_CPOL setting in SPI driver

2010-09-30T12:42:13+00:00

The handling of the SPI_CPOL bit inside the SPI
driver was wrong. As reported by the manual,
the meaning of the SSPOL inside the
configuration register is the same as reported
by SPI specification (0 if low in idle, 1 is high
on idle). The driver inverts this logic.

Because this patch sets the logic as specified, it is required
to clear the CPOL bit in the configuration file to adapt
to the correct logic.

Signed-off-by: Stefano Babic 
Signed-off-by: David Jander