u-boot.git/include/configs/mx35pdk.h, branch v2016.01 Unnamed repository; edit this file 'description' to name the repository. common/board_f.c: change the macro name and remove it for PPC platforms 2015-10-29T17:33:58+00:00 Gong Qianyu Qianyu.Gong@freescale.com 2015-10-26T11:47:42+00:00 18fb0e3cae64b03c51db7ba8b607e9031a844b99 For most PPC platforms, they will call the first get_clocks() in init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is then defined to call the second get_clocks(), which should be redundant for PPC. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
For most PPC platforms, they will call the first get_clocks() in
init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is
then defined to call the second get_clocks(), which should be
redundant for PPC.

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
common/board_f.c: modify the macro to use get_clocks() more common 2015-10-24T17:50:38+00:00 Gong Qianyu Qianyu.Gong@freescale.com 2015-09-09T08:44:16+00:00 677f970bc62a661690b3431543d5a5d5e682ba70 get_clocks() should not be limited by ESDHC. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> 
get_clocks() should not be limited by ESDHC.

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
arm, powerpc: select SYS_GENERIC_BOARD 2015-10-24T17:50:38+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2015-10-20T12:09:06+00:00 09f3ca3dd53b671b009ddc4e1dad669c280094f0 We have finished Generic Board conversion for ARM and PowerPC, i.e. all the boards have been converted except OpenRISC, SuperH, SPARC, which have not supported Generic Board framework yet. Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro defines in include/configs/*.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
We have finished Generic Board conversion for ARM and PowerPC, i.e.
all the boards have been converted except OpenRISC, SuperH, SPARC,
which have not supported Generic Board framework yet.

Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
defines in include/configs/*.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I2C: mxc_i2c: make I2C1 and I2C2 optional 2015-10-02T08:42:31+00:00 Albert ARIBAUD \\(3ADEV\\) albert.aribaud@3adev.fr 2015-09-21T20:43:38+00:00 03544c6640e8a969f8409eac637f4780e1eabb1d The driver assumed that I2C1 and I2C2 were always enabled, and if they were not, then an asynchronous abort was (silently) raised, to be caught much later on in the Linux kernel. Fix this by making I2C1 and I2C2 optional just like I2C3 and I2C4 are. To make the change binary-invariant, declare I2C1 and I2C2 in every include/configs/ file which defines CONFIG_SYS_I2C_MXC. Also, while updating README about CONFIG_SYS_I2C_MXC_I2C1 and CONFIG_SYS_I2C_MXC_I2C2, add missing descriptions for I2C4 speed (CONFIG_SYS_MXC_I2C4_SPEED) and slave (CONFIG_SYS_MXC_I2C4_SLAVE) config options. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 
The driver assumed that I2C1 and I2C2 were always enabled,
and if they were not, then an asynchronous abort was (silently)
raised, to be caught much later on in the Linux kernel.

Fix this by making I2C1 and I2C2 optional just like I2C3 and I2C4
are.

To make the change binary-invariant, declare I2C1 and I2C2 in
every include/configs/ file which defines CONFIG_SYS_I2C_MXC.

Also, while updating README about CONFIG_SYS_I2C_MXC_I2C1 and
CONFIG_SYS_I2C_MXC_I2C2, add missing descriptions for I2C4 speed
(CONFIG_SYS_MXC_I2C4_SPEED) and slave (CONFIG_SYS_MXC_I2C4_SLAVE)
config options.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
Move defaults from config_cmd_default.h to Kconfig 2015-06-26T02:18:34+00:00 Joe Hershberger joe.hershberger@ni.com 2015-06-22T21:15:30+00:00 ef0f2f57524ec85fb9058a23298f2c4995e0d950 This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com> 
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini <trini@konsulko.com>
net: Move the CMD_NET config to defconfigs 2015-06-01T14:40:15+00:00 Joe Hershberger joe.hershberger@ni.com 2015-05-30T00:46:35+00:00 6eed3786c68c8a49d2986ac4f9f6e3071b769d41 This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a8 (commands: add more command entries in Kconfig). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> 
This also selects CONFIG_NET for any CONFIG_CMD_NET board.

Remove the imx default for CONFIG_NET.

This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23T15:55:53+00:00 York Sun yorksun@freescale.com 2015-03-20T17:20:40+00:00 f8cb101e1e3f5ee2007b78b6b12e24120385aeac Some SoCs have more than two I2C busses. Instead of adding ifdef to the driver, macros are put into board header file where CONFIG_SYS_I2C_MXC is defined. Signed-off-by: York Sun <yorksun@freescale.com> CC: Heiko Schocher <hs@denx.de> 
Some SoCs have more than two I2C busses. Instead of adding ifdef
to the driver, macros are put into board header file where
CONFIG_SYS_I2C_MXC is defined.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: Heiko Schocher <hs@denx.de>
Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-03-18T11:07:43+00:00 Tom Rini trini@konsulko.com 2015-03-18T11:07:43+00:00 a538ae997ae4cb375ba5362b50ba3f5b35f9519b 






mx35pdk: Use the default CONFIG_SYS_PBSIZE
2015-03-13T12:13:47+00:00

Fabio Estevam
fabio.estevam@freescale.com

2015-03-02T17:14:30+00:00

9cf38bf71d1ebb45c55a0d9b466cef689881cb90

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>





Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>







mx35pdk: Convert to generic board
2015-03-05T14:23:17+00:00

Stefano Babic
sbabic@denx.de

2015-03-05T09:41:16+00:00

e71f9d3de4b914ffb4eae23c13eaad75887d36ac

Boards need to select CONFIG_SYS_GENERIC_BOARD in order to
prevent removal from the project.

Signed-off-by: Stefano Babic <sbabic@denx.de>





Boards need to select CONFIG_SYS_GENERIC_BOARD in order to
prevent removal from the project.

Signed-off-by: Stefano Babic <sbabic@denx.de>