u-boot.git/include/configs/mx53ard.h, branch v2013.10-rc2

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

mx53ard: Change default environment to cope with OE changes

2013-07-12T11:05:42Z

OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: Otavio Salvador Acked-by: Fabio Estevam

ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART

2013-06-06T13:45:42Z

When running the "save" command several times on a mx6qsabresd we see: U-Boot > save Saving Environment to MMC... Writing to MMC(1)... done U-Boot > save Saving Environment to MMC... MMC partition switch failed U-Boot > save Saving Environment to MMC... Writing to MMC(1)... done U-Boot > save Saving Environment to MMC... MMC partition switch failed U-Boot > save Saving Environment to MMC... Writing to MMC(1)... done U-Boot > save Saving Environment to MMC... MMC partition switch failed This issue is caused by the incorrect usage of CONFIG_SYS_MMC_ENV_PART. CONFIG_SYS_MMC_ENV_PART should be used to specify the mmc partition that stores the environment variables. On some imx boards it is been incorrectly used to pass the partition of kernel and dtb files for the 'mmcpart' script variable. Remove the CONFIG_SYS_MMC_ENV_PART usage and configure the 'mmcpart' variable directly. Reported-by: Jason Liu Signed-off-by: Fabio Estevam Acked-by: Jason Liu

mx53ard: Rework default environment to support FDT, MMC and netboot

2013-04-26T07:17:12Z

This reworks the environment settings to be aligned with the other i.MX boards. The loadaddr has been changed to allow the Freescale kernel and mainline kernel to work without environment changes. Signed-off-by: Otavio Salvador Acked-by: Fabio Estevam

mx5: Select CONFIG_REVISION_TAG

2013-04-25T19:48:21Z

FSL 2.6.35 kernel expects that revision tag is passed by the bootloader. Select CONFIG_REVISION_TAG so that mx53 boards can work properly with 2.6.35. Signed-off-by: Fabio Estevam Acked-by: Marek Vasut

imx: mx53ard: Add support for NAND Flash

2013-04-12T05:55:04Z

Add support for the Samsung K9LAG08U0M NAND Flash (2-GiB MLC NAND Flash, 2-kiB pages, 256-kiB blocks, 30-ns R/W cycles, 1 CS) on mx53ard. eNFC_CLK_ROOT is set up with a cycle time of 37.5 ns (400 MHz / 3 / 5) for this board, which satisfies the 30-ns NF R/W cycle requirement. Signed-off-by: Benoît Thébaudeau Tested-by: Fabio Estevam

configs: Fix usage of mmc rescan

2012-10-23T15:33:17Z

Fix usage of 'mmc rescan' by many configs. Proper use is 'mmc dev ${mmcdev}; mmc rescan' to set the mmc device and then rescan the device. 'mmc rescan' itself does not take any arguments. Signed-off-by: Andrew Bradford

mx5/6: Define default SoC input clock frequencies

2012-10-15T18:54:10Z

Define default SoC input clock frequencies for i.MX5/6 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau Cc: Stefano Babic Cc: Jason Liu Cc: Matt Sealey Cc: Fabio Estevam

ARM: Remove unused stack and irq config defines

2012-09-01T12:58:22Z

CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present in most ARM board config files. IRQs are only enabled for 1 config, so remove the unused config options for IRQ and FIQ stack size as well. Cc: Albert ARIBAUD Signed-off-by: Rob Herring

configs: Remove unused symbol CONFIG_DISCOVER_PHY

2012-08-09T20:32:05Z

CONFIG_DISCOVER_PHY is not used anywhere, so remove it from config files. Signed-off-by: Fabio Estevam