u-boot.git/include/configs/mx53smd.h, branch v2013.10-rc2

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

mx5: Select CONFIG_REVISION_TAG

2013-04-25T19:48:21Z

FSL 2.6.35 kernel expects that revision tag is passed by the bootloader. Select CONFIG_REVISION_TAG so that mx53 boards can work properly with 2.6.35. Signed-off-by: Fabio Estevam Acked-by: Marek Vasut

configs: Fix usage of mmc rescan

2012-10-23T15:33:17Z

Fix usage of 'mmc rescan' by many configs. Proper use is 'mmc dev ${mmcdev}; mmc rescan' to set the mmc device and then rescan the device. 'mmc rescan' itself does not take any arguments. Signed-off-by: Andrew Bradford

mx5/6: Define default SoC input clock frequencies

2012-10-15T18:54:10Z

Define default SoC input clock frequencies for i.MX5/6 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau Cc: Stefano Babic Cc: Jason Liu Cc: Matt Sealey Cc: Fabio Estevam

ARM: Remove unused stack and irq config defines

2012-09-01T12:58:22Z

CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present in most ARM board config files. IRQs are only enabled for 1 config, so remove the unused config options for IRQ and FIQ stack size as well. Cc: Albert ARIBAUD Signed-off-by: Rob Herring

configs: Remove unused symbol CONFIG_DISCOVER_PHY

2012-08-09T20:32:05Z

CONFIG_DISCOVER_PHY is not used anywhere, so remove it from config files. Signed-off-by: Fabio Estevam

mxc_i2c: specify i2c base address in config file

2012-07-11T08:54:29Z

The following platforms had their config files changed flea3, imx31_phycore, mx35pdk, mx53ard, mx53evk, mx53smd and mx53loco. Signed-off-by: Troy Kisky Acked-by: Stefano Babic

mx53smd: Remove CONFIG_SYS_I2C_SLAVE definition

2012-07-07T12:07:28Z

According to include/i2c.h: "/* * Many boards/controllers/drivers don't support an I2C slave interface so * provide a default slave address for them for use in common code. A real * value for CONFIG_SYS_I2C_SLAVE should be defined for any board which does * support a slave interface. */ #ifndef CONFIG_SYS_I2C_SLAVE #define CONFIG_SYS_I2C_SLAVE 0xfe #endif " As the mxc_i2c driver does not support slave mode, there is no need to define CONFIG_SYS_I2C_SLAVE in i.MX board file. Signed-off-by: Fabio Estevam

hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c

2012-06-20T18:36:51Z

Exactly one board has defined CONFIG_SYS_PROMPT_HUSH_PS2 to a value different than "> " which is vision2. I have Cc'd the maintainer here as I strongly suspect this is a bug rather than intentional behavior. Cc: Stefano Babic Signed-off-by: Tom Rini Acked-by: Stefano Babic

CONFIG_SYS_BAUDRATE_TABLE: Add , place there

2012-06-20T18:26:16Z

We provide a default table of { 9600, 19200, 38400, 57600, 115200 } in which mkconfig places after in the generated config file. This is used when a board has not set its own table. Signed-off-by: Tom Rini