u-boot.git/include/configs/mx6_common.h, branch v2017.01 Unnamed repository; edit this file 'description' to name the repository. crypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig 2017-01-05T00:40:19+00:00 York Sun york.sun@nxp.com 2016-12-28T16:43:31+00:00 90b80386ffc60549f4529b766db182de06102b0e Use Kconfig option to set little- or big-endian access to secure boot and trust architecture. Signed-off-by: York Sun <york.sun@nxp.com> 
Use Kconfig option to set little- or big-endian access to secure
boot and trust architecture.

Signed-off-by: York Sun <york.sun@nxp.com>
crypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig 2017-01-05T00:40:17+00:00 York Sun york.sun@nxp.com 2016-12-28T16:43:30+00:00 2c2e2c9e14462a34bb99ba281c7445c3174a0fe6 Instead of define CONFIG_SYS_FSL_SEC_COMPAT in header files for PowerPC and ARM SoCs, move it to Kconfig under the driver. Signed-off-by: York Sun <york.sun@nxp.com> 
Instead of define CONFIG_SYS_FSL_SEC_COMPAT in header files for PowerPC
and ARM SoCs, move it to Kconfig under the driver.

Signed-off-by: York Sun <york.sun@nxp.com>
arm: imx: add HAB authentication of image to SPL boot 2017-01-02T16:04:38+00:00 Sven Ebenfeld sven.ebenfeld@gmail.com 2016-11-06T15:37:55+00:00 15b505b0553da2d8a99ae5c1d14968e87f5c6bef When using HAB as secure boot mechanism on Wandboard, the chain of trust breaks immediately after the SPL. As this is not checking the authenticity of the loaded image before jumping to it. The HAB status output will not be implemented in SPL as it adds a lot of strings that are only required in debug cases. With those it exceeds the maximum size of the available OCRAM (69 KiB). The SPL MISC driver support must be enabled, so that the driver can use OTP fuse to check if HAB is enabled. Cc: sbabic@denx.de v2-Changes: None Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> 
When using HAB as secure boot mechanism on Wandboard, the chain of
trust breaks immediately after the SPL. As this is not checking
the authenticity of the loaded image before jumping to it.

The HAB status output will not be implemented in SPL as it adds
a lot of strings that are only required in debug cases. With those
it exceeds the maximum size of the available OCRAM (69 KiB).

The SPL MISC driver support must be enabled, so that the driver can use OTP fuse
to check if HAB is enabled.

Cc: sbabic@denx.de

v2-Changes: None

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
mmc: complete unfinished move of CONFIG_MMC 2016-12-29T18:08:07+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2016-12-07T13:10:26+00:00 c27269953b94d19b3fc7a21a1c3e19985507b94d Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created a Kconfig entry for this option without any actual moves, then commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved instances only for SUNXI. We generally do not like such partial moves. This kind of work is automated by tools/moveconfig.py, so it is pretty easy to complete this move. I am adding "default ARM || PPC || SANDBOX" (suggested by Tom). This shortens the configs and will ease new board porting. This commit was created as follows: [1] Edit Kconfig (remove the "depends on", add the "default", copy the prompt and help message from Linux) [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> 
Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
a Kconfig entry for this option without any actual moves, then
commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
instances only for SUNXI.

We generally do not like such partial moves.  This kind of work
is automated by tools/moveconfig.py, so it is pretty easy to
complete this move.

I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
This shortens the configs and will ease new board porting.

This commit was created as follows:

[1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

[2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
mx6_common: correct loadaddr and text base for i.MX6SLL 2016-12-16T10:38:24+00:00 Peng Fan peng.fan@nxp.com 2016-12-11T11:24:32+00:00 0114011986547af14a9c4141e058c5ce30424f88 Correct loadaddr and text base for i.MX6SLL Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> 
Correct loadaddr and text base for i.MX6SLL

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
mx6_common: add secure boot support 2016-10-17T07:04:43+00:00 Gary Bisson gary.bisson@boundarydevices.com 2016-08-25T17:03:18+00:00 e22685d2b6ba337f20bc2d4f815f14e7c87f98bd Selecting the proper options to enable the build of the HAB tools. Note, this support is disabled by default, one will have to select the SECURE_BOOT configuration through menuconfig to enable it. See doc/README.mxc_hab for more details. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> 
Selecting the proper options to enable the build of the HAB tools.

Note, this support is disabled by default, one will have to select
the SECURE_BOOT configuration through menuconfig to enable it.

See doc/README.mxc_hab for more details.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
common: Add DISPLAY_BOARDINFO 2016-10-12T12:20:17+00:00 Lokesh Vutla lokeshvutla@ti.com 2016-10-12T01:33:46+00:00 8435179271106ec6fe9a9a5679b897755b1db8dd Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> 
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default
in certain architectures.  Migrate all config files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
common/Kconfig: Add DISPLAY_CPUINFO 2016-10-12T12:04:34+00:00 Lokesh Vutla lokeshvutla@ti.com 2016-10-08T18:41:44+00:00 19a9747535c105fa458d0c9929e6785cf56d1292 Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> 
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default
in certain architectures.  Migrate all config files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
autoboot: follow-up cleanup after CONFIG_BOOTDELAY moves 2016-06-12T22:46:29+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2016-06-11T09:44:09+00:00 3865b9ebe73eb6246ff2ab6ae7957f507eb539f7 Tidy up garbage left by commit bb597c0eeb7e ("common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
Tidy up garbage left by commit bb597c0eeb7e ("common: bootdelay: move
CONFIG_BOOTDELAY into a Kconfig option").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option 2016-06-09T17:53:05+00:00 Heiko Schocher hs@denx.de 2016-06-07T06:31:14+00:00 bb597c0eeb7ee2f6e983577d993c76a30dd3c2b4 move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il> 
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.

Signed-off-by: Heiko Schocher <hs@denx.de>

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>