u-boot.git/include/configs/mx6_common.h, branch v2018.01

imx: initialize and use generic timer on i.MX 6UL/ULL

2018-01-08T16:33:06+00:00

The i.MX 6UL/ULL feature a Cortex-A7 CPU which suppor the ARM
generic timer. This change makes use of the ARM generic timer in
U-Boot.

This is crucial to make the ARM generic timers usable in Linux since
timer_init() initalizes the system counter module, which is necessary
to use the generic timers CP15 registers.

Signed-off-by: Stefan Agner 
Reviewed-by: Fabio Estevam

mx6ull: Handle the CONFIG_MX6ULL cases correctly

2018-01-04T15:29:04+00:00

Since commit 051ba9e082f7 ("Kconfig: mx6ull: Deselect MX6UL from
CONFIG_MX6ULL") CONFIG_MX6ULL does not select CONFIG_MX6UL anymore, so
take this into consideration in all the checks for CONFIG_MX6UL.

This fixes a boot regression.

Reported-by: Stefan Agner 
Signed-off-by: Fabio Estevam 
Reviewed-by: Stefan Agner 
Tested-by: Breno Lima 
Tested-by: Peng Fan 
Reviewed-by: Stefano Babic 
Tested-by: Jörg Krause

mx6_common: remove dead code

2017-12-29T10:17:22+00:00

There is an #ifdef and #endif with nothing in between.  This patch simply
removes this dead/useless code.

Signed-off-by: Adam Ford 
Reviewed-by: Fabio Estevam

include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions

2017-09-03T19:30:30+00:00

This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
equal to CONFIG_SYS_CBSIZE in numerous configuration files.

We remove such definitions in two situations:

 - CONFIG_SYS_CBSIZE is otherwise not defined in the board
   configuration file, which means the default value of
   CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
   of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
   larger.

 - CONFIG_SYS_CBSIZE is defined in the board configuration file, but
   to a value equal or less than 512. In this case, the default value
   of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
   is equal or larger.

Signed-off-by: Thomas Petazzoni 
Reviewed-by: Tom Rini

imx: reorganize IMX code as other SOCs

2017-07-12T08:17:44+00:00

Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic 

CC: Fabio Estevam 
CC: Akshay Bhat 
CC: Ken Lin 
CC: Marek Vasut 
CC: Heiko Schocher 
CC: "Sébastien Szymanski" 
CC: Christian Gmeiner 
CC: Stefan Roese 
CC: Patrick Bruenn 
CC: Troy Kisky 
CC: Nikita Kiryanov 
CC: Otavio Salvador 
CC: "Eric Bénard" 
CC: Jagan Teki 
CC: Ye Li 
CC: Peng Fan 
CC: Adrian Alonso 
CC: Alison Wang 
CC: Tim Harvey 
CC: Martin Donnelly 
CC: Marcin Niestroj 
CC: Lukasz Majewski 
CC: Adam Ford 
CC: "Albert ARIBAUD (3ADEV)" 
CC: Boris Brezillon 
CC: Soeren Moch 
CC: Richard Hu 
CC: Wig Cheng 
CC: Vanessa Maegima 
CC: Max Krummenacher 
CC: Stefan Agner 
CC: Markus Niebel 
CC: Breno Lima 
CC: Francesco Montefoschi 
CC: Jaehoon Chung 
CC: Scott Wood 
CC: Joe Hershberger 
CC: Anatolij Gustschin 
CC: Simon Glass 
CC: "Andrew F. Davis" 
CC: "Łukasz Majewski" 
CC: Patrice Chotard 
CC: Nobuhiro Iwamatsu 
CC: Hans de Goede 
CC: Masahiro Yamada 
CC: Stephen Warren 
CC: Andre Przywara 
CC: "Álvaro Fernández Rojas" 
CC: York Sun 
CC: Xiaoliang Yang 
CC: Chen-Yu Tsai 
CC: George McCollister 
CC: Sven Ebenfeld 
CC: Filip Brozovic 
CC: Petr Kulhavy 
CC: Eric Nelson 
CC: Bai Ping 
CC: Anson Huang 
CC: Sanchayan Maity 
CC: Lokesh Vutla 
CC: Patrick Delaunay 
CC: Gary Bisson 
CC: Alexander Graf 
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam 
Reviewed-by: Christian Gmeiner

Convert CONFIG_CMD_FUSE to Kconfig

2017-05-22T13:33:58+00:00

This converts the following to Kconfig:
   CONFIG_CMD_FUSE

Signed-off-by: Simon Glass

Convert CONFIG_CMD_DEKBLOB to Kconfig

2017-04-30T17:41:00+00:00

This converts the following to Kconfig:
   CONFIG_CMD_DEKBLOB

Note: This option does not seem to actually be enabled by any board.

Signed-off-by: Simon Glass 
[trini: imply under SECURE_BOOT for mx5/6/7]
Signed-off-by: Tom Rini

Kconfig: Migrate CONFIG_BAUDRATE

2017-03-19T18:48:37+00:00

Move this in to Kconfig with a default of 115200.

Signed-off-by: Philipp Tomsich 
[trini: Run moveconfig.py, reword commit slightly]
Signed-off-by: Tom Rini

ARM: Migrate errata to Kconfig

2017-03-10T00:52:50+00:00

This moves all of the current ARM errata from various header files and in to
Kconfig.  This allows for a minor amount of cleanup as we had some instances
where both a general common header file was enabling errata as well as the
board config.  We now just select these once at the higher level in Kconfig

Signed-off-by: Tom Rini

Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs

2017-03-09T16:37:24+00:00

In some cases this is absolutely required, so select this for some secure
features.  This also requires migration of RSA_FREESCALE_EXP

Cc: Ruchika Gupta 
Cc: Poonam Aggrwal 
Cc: Naveen Burmi 
Cc: Po Liu 
Cc: Shengzhou Liu 
Cc: Priyanka Jain 
Cc: Sumit Garg 
Cc: Shaohui Xie 
Cc: Chunhe Lan 
Cc: Feng Li 
Cc: Alison Wang 
Cc: Mingkai Hu 
Cc: York Sun 
Cc: Saksham Jain 
Cc: Prabhakar Kushwaha 
Signed-off-by: Tom Rini