u-boot.git/include/configs/mx6qsabresd.h, branch u-boot-2013.01.y

mx6qsabresd: Fix booting the kernel from SDHC3

2013-01-13T11:04:47+00:00

Since commit de7d02aeb (mx6qsabresd: add usdhc2 and usdhc4 support)
SDHC3 device node is no longer 0, which breaks loading a uImage from SDHC3.

Fix it by adapting the default environment to use CONFIG_SYS_MMC_ENV_DEV as the
correct mmc node for loading the kernel from.

While at it, go back to using SDHC3 as the default mmc, since we have Yocto
images that generate an SD card containing U-boot,kernel and rootfs, so it is
more convenient to keep using SDHC3 as it was originally.

Signed-off-by: Fabio Estevam

mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or not

2013-01-13T10:53:45+00:00

Signed-off-by: Otavio Salvador 
Tested-by: Fabio Estevam

mx6qsabresd: use on-board eMMC to store environment

2013-01-05T17:01:26+00:00

It makes more sense to use on-board eMMC to store environments.  The
boot partition 1 is selected by default.

Signed-off-by: Shawn Guo

mx6qsabresd: add usdhc2 and usdhc4 support

2013-01-05T17:00:14+00:00

The on-board number of available usdhc devices is something board
specific.  The patch moves CONFIG_SYS_FSL_USDHC_NUM out of
mx6qsabre_common.h and adds usdhc2 and usdhc4 support for mx6qsabresd
board.

To keep the default mmc device for environment same as before (usdhc3),
it moves CONFIG_SYS_MMC_ENV_DEV out of mx6qsabre_common.h and changes
it to 1 for mx6qsabresd.

Signed-off-by: Shawn Guo

mx6qsabreauto: Change mmcroot so it works out of box

2012-10-16T10:35:11+00:00

The mmcroot setting vary between mx6qsabreauto and mx6qsabresd so we
move this to the board configuration file.

Signed-off-by: Otavio Salvador 
Acked-by: Fabio Estevam

mx6qsabreauto: Use ttymxc3 as console

2012-10-15T18:54:13+00:00

The mx6qsabreauto console is different than mx6qsabresd so the console
configuration is now set in the board file.

Signed-off-by: Otavio Salvador 
Acked-by: Stefano Babic

configs: mx6: Add a common config file

2012-10-15T18:54:09+00:00

Add a common mx6 config file that can be shared between some mx6 boards.

Signed-off-by: Fabio Estevam

mx6qsabresd: Add Ethernet support

2012-10-15T18:54:08+00:00

mx6qsabresd has a AR8031 Gigabit PHY.

Add support for it.

Also increase CONFIG_SYS_MALLOC_LEN so that FEC buffer allocation does not fail.

Tested on 1Gbp and 100Mbps networks.

Suggested-by: Kim Phillips 
Signed-off-by: Fabio Estevam 
Acked-by: Kim Phillips

mx6: Add basic support for mx6qsabresd board.

2012-10-15T18:54:08+00:00

mx6qsabresd is a board based on mx6q SoC with the following features:
- 1GB of DDR3
- 1 USB OTG port
- 1 HDMI output port
- SPI NOR
- LVDS panel
- Gigabit Ethernet
- Camera Connector
- eMMC and SD card slot
- Audio

Add very basic support for it.

Signed-off-by: Fabio Estevam