u-boot.git/include/configs/mx7dsabresd.h, branch v2016.01

imx: mx7dsabresd: Add QSPI support

2015-12-11T16:42:23+00:00

Support qspi flashes for mx7dsabresd
1. introduce pin mux settings
2. enable qspi clock
3. introduce related macro definitions

Default QSPI is not enabled, since we need hardware rework to use QSPI,
see SPF-28590, page 9:
"
QSPI signals are muxed with EPDC_D[7:0]
When using QSPI: de-populate R388-R391, R396-R399
populate R392-R395, R299, R300
"

After hardware rework, define CONFIG_FSL_QSPI in mx7dsabresd.h. qspi
flashes can be deteced and read/erase/write. Log info:
"
=> sf probe
SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB
=> sf read 0x80000000 0 0x4000000
device 0 whole chip
SF: 67108864 bytes @ 0x0 Read: OK
=> sf erase 0 0x4000000
SF: 67108864 bytes @ 0x0 Erased: OK
=> sf write 0x80000000 0 0x4000000
device 0 whole chip
SF: 67108864 bytes @ 0x0 Written: OK
"

Cc: Fabio Estevam 
Cc: Adrian Alonso 
Reviewed-by: Stefano Babic 
Reviewed-by: Jagan Teki 
Signed-off-by: Peng Fan

imx: mx7dsabresd: support lcdif

2015-11-12T16:41:20+00:00

Support LCDIF for mx7dsabresd board:
1. Add pinmux settings
2. Add VIDEO related macro definition and videomode env settings.

Signed-off-by: Peng Fan 
Cc: Stefano Babic 
Cc: Fabio Estevam 
Cc: Adrian Alonso

mx7dsabresd: enable DFU support

2015-11-12T16:14:48+00:00

On the target board:

  => dfu 0 mmc 0

On the host PC:

  $ dfu-util -l

    Found DFU: [0525:a4a5] devnum=0, cfg=1, intf=0, alt=0, name="image"
    Found DFU: [0525:a4a5] devnum=0, cfg=1, intf=0, alt=1, name="u-boot"
    Found DFU: [0525:a4a5] devnum=0, cfg=1, intf=0, alt=2, name="bootimg"
    Found DFU: [0525:a4a5] devnum=0, cfg=1, intf=0, alt=3, name="rootfs"

  Update with a full SD image

  $ dfu-util -a image -D core-image-minimal-imx7dsabresd.sdcard

  Update u-boot only

  $ dfu-util -a u-boot -D u-boot.imx

Signed-off-by: Tzu-Jung Lee 
Reviewed-by: Fabio Estevam

mx7dsabresd: add secure boot support

2015-10-30T14:22:37+00:00

Add secure boot support for mx7dsabresd target board

Signed-off-by: Adrian Alonso

I2C: mxc_i2c: make I2C1 and I2C2 optional

2015-10-02T08:42:31+00:00

The driver assumed that I2C1 and I2C2 were always enabled,
and if they were not, then an asynchronous abort was (silently)
raised, to be caught much later on in the Linux kernel.

Fix this by making I2C1 and I2C2 optional just like I2C3 and I2C4
are.

To make the change binary-invariant, declare I2C1 and I2C2 in
every include/configs/ file which defines CONFIG_SYS_I2C_MXC.

Also, while updating README about CONFIG_SYS_I2C_MXC_I2C1 and
CONFIG_SYS_I2C_MXC_I2C2, add missing descriptions for I2C4 speed
(CONFIG_SYS_MXC_I2C4_SPEED) and slave (CONFIG_SYS_MXC_I2C4_SLAVE)
config options.

Signed-off-by: Albert ARIBAUD (3ADEV)

imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE

2015-09-24T09:32:18+00:00

We use outer pmic reset and drop internal reset signal, bmode will
not work as expected, so drop boot mode code for 7dsabresd board.

Signed-off-by: Peng Fan 
Cc: Stefano Babic 
Cc: Adrian Alonso

mx7dsabresd: Remove unused config option

2015-09-20T07:47:59+00:00

CONFIG_FEC_DMA_MINALIGN is not used anywhere, so let's remove it.

Signed-off-by: Fabio Estevam

imx: mx7dsabresd: Add support for MX7D SABRESD board

2015-09-13T08:11:54+00:00

* Add i.MX7D SABRESD target board support with enabled modules:
  UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX.

  Build target: mx7dsabresd_config

Signed-off-by: Peng Fan 
Signed-off-by: Fugang Duan 
Signed-off-by: Ye.Li 
Signed-off-by: Adrian Alonso