u-boot.git/include/configs/nas220.h, branch master Unnamed repository; edit this file 'description' to name the repository. global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG 2022-12-23T15:09:42+00:00 Tom Rini trini@konsulko.com 2022-12-04T15:03:50+00:00 0613c36a7a5973d58a50b764ee647099e80cc97d Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com> 
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
global: Remove unused CONFIG symbols 2022-12-22T15:31:48+00:00 Tom Rini trini@konsulko.com 2022-12-02T21:42:31+00:00 308520b8f2b11b3427fe8a02171839992bc85da6 This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <trini@konsulko.com> 
This removes the following unreferenced CONFIG symbols:
   CONFIG_FDTADDR
   CONFIG_FDTFILE
   CONFIG_FLASH_SECTOR_SIZE
   CONFIG_FSL_CPLD
   CONFIG_HDMI_ENCODER_I2C_ADDR
   CONFIG_I2C_MVTWSI
   CONFIG_I2C_RTC_ADDR
   CONFIG_IRAM_END
   CONFIG_IRAM_SIZE
   CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
   CONFIG_L1_INIT_RAM
   CONFIG_MACB_SEARCH_PHY
   CONFIG_MIU_2BIT_21_7_INTERLEAVED
   CONFIG_MTD_NAND_VERIFY_WRITE
   CONFIG_MVGBE_PORTS
   CONFIG_NETDEV
   CONFIG_NUM_DSP_CPUS
   CONFIG_PHY_BASE_ADR
   CONFIG_PHY_INTERFACE_MODE
   CONFIG_PSRAM_SCFG
   CONFIG_RAMBOOT_SPIFLASH
   CONFIG_RAMBOOT_TEXT_BASE
   CONFIG_RD_LVL
   CONFIG_ROCKCHIP_SDHCI_MAX_FREQ
   CONFIG_SETUP_INITRD_TAG
   CONFIG_SH_QSPI_BASE
   CONFIG_SMDK5420
   CONFIG_SOCRATES
   CONFIG_SPI_ADDR
   CONFIG_SPI_FLASH_QUAD
   CONFIG_SPI_FLASH_SIZE
   CONFIG_SPI_HALF_DUPLEX
   CONFIG_SPI_N25Q256A_RESET
   CONFIG_TEGRA_SLINK_CTRLS
   CONFIG_TPM_TIS_BASE_ADDRESS
   CONFIG_UBOOT_SECTOR_COUNT
   CONFIG_UBOOT_SECTOR_START
   CONFIG_VAR_SIZE_SPL
   CONFIG_VERY_BIG_RAM

And also:
   BL1_SIZE
   PHY_NO
   RESERVE_BLOCK_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environment 2022-06-28T21:11:49+00:00 Tom Rini trini@konsulko.com 2022-06-14T02:57:36+00:00 a331017c237c7da159a1657984250d656ed1c487 - Ensure that everyone setting mtdids= and mtdparts= is doing so via the CONFIG options. - If the CONFIG options are set, ensure that the default environment sets mtdparts / mtdids. Signed-off-by: Tom Rini <trini@konsulko.com> 
- Ensure that everyone setting mtdids= and mtdparts= is doing so via the
  CONFIG options.
- If the CONFIG options are set, ensure that the default environment
  sets mtdparts / mtdids.

Signed-off-by: Tom Rini <trini@konsulko.com>
Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOAD 2022-06-28T21:11:49+00:00 Tom Rini trini@konsulko.com 2022-06-14T02:57:35+00:00 bf904ea41883d7dacd77a1c257d10cc89a0ec394 The "autoload" environment variable is always checked with env_get_yesno as it can be set to any form of no. The default behavior of env_get_yesno is to return -1 on variables that are not set, which acts as true in general (we test for non-zero return). To convert CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for consistency sake. Then, make it so that if enabled we set autoload=0 in the default environment. Migrate all platforms which set CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their default environment to using CONFIG_SYS_DISABLE_AUTOLOAD Signed-off-by: Tom Rini <trini@konsulko.com> 
The "autoload" environment variable is always checked with env_get_yesno
as it can be set to any form of no.  The default behavior of
env_get_yesno is to return -1 on variables that are not set, which acts
as true in general (we test for non-zero return).  To convert
CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to
set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for
consistency sake.  Then, make it so that if enabled we set autoload=0 in
the default environment.  Migrate all platforms which set
CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their
default environment to using CONFIG_SYS_DISABLE_AUTOLOAD

Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_JFFS2_DEV et al to Kconfig 2021-12-27T21:20:19+00:00 Tom Rini trini@konsulko.com 2021-12-17T23:08:47+00:00 968c6210e6bc4c76edeeacc16f02aef2a14dd96f This converts the following to Kconfig: CONFIG_JFFS2_DEV CONFIG_JFFS2_LZO CONFIG_JFFS2_NAND CONFIG_JFFS2_PART_OFFSET CONFIG_JFFS2_PART_SIZE Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_JFFS2_DEV
   CONFIG_JFFS2_LZO
   CONFIG_JFFS2_NAND
   CONFIG_JFFS2_PART_OFFSET
   CONFIG_JFFS2_PART_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_KIRKWOOD_GPIO to Kconfig 2021-12-27T21:20:19+00:00 Tom Rini trini@konsulko.com 2021-12-17T23:08:46+00:00 b2d1c828b973fc2355e6192610af56a4968261e0 This converts the following to Kconfig: CONFIG_KIRKWOOD_GPIO Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_KIRKWOOD_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_88F5182 et al to Kconfig 2021-12-27T21:20:19+00:00 Tom Rini trini@konsulko.com 2021-12-17T23:08:44+00:00 f98b3be287bf59414e282fda6e9879dafeae150a This converts the following to Kconfig: CONFIG_88F5182 CONFIG_BOARD_IS_OPENRD_BASE CONFIG_BOARD_IS_OPENRD_CLIENT CONFIG_BOARD_IS_OPENRD_ULTIMATE CONFIG_D2NET_V2 CONFIG_FEROCEON CONFIG_FEROCEON_88FR131 CONFIG_INETSPACE_V2 CONFIG_KW88F6192 CONFIG_KW88F6281 CONFIG_KW88F6702 CONFIG_NET2BIG_V2 CONFIG_NETSPACE_LITE_V2 CONFIG_NETSPACE_MAX_V2 CONFIG_NETSPACE_MINI_V2 CONFIG_NETSPACE_V2 CONFIG_SHEEVA_88SV131 At this point mv-plug-common.h is now only an include of mv-common.h so remove that indirection. Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_88F5182
   CONFIG_BOARD_IS_OPENRD_BASE
   CONFIG_BOARD_IS_OPENRD_CLIENT
   CONFIG_BOARD_IS_OPENRD_ULTIMATE
   CONFIG_D2NET_V2
   CONFIG_FEROCEON
   CONFIG_FEROCEON_88FR131
   CONFIG_INETSPACE_V2
   CONFIG_KW88F6192
   CONFIG_KW88F6281
   CONFIG_KW88F6702
   CONFIG_NET2BIG_V2
   CONFIG_NETSPACE_LITE_V2
   CONFIG_NETSPACE_MAX_V2
   CONFIG_NETSPACE_MINI_V2
   CONFIG_NETSPACE_V2
   CONFIG_SHEEVA_88SV131

At this point mv-plug-common.h is now only an include of mv-common.h so
remove that indirection.

Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig 2021-12-01T15:58:10+00:00 Tom Rini trini@konsulko.com 2021-11-10T14:11:40+00:00 970bf8603b877e2b66170290f751f9c23c120838 This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_USE_BOOTCOMMAND
   CONFIG_BOOTCOMMAND
   CONFIG_RAMBOOTCOMMAND
   CONFIG_NFSBOOTCOMMAND

Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_USB_EHCI_IS_TDI to Kconfig 2021-10-15T13:42:22+00:00 Marek Behún marek.behun@nic.cz 2021-10-09T13:27:35+00:00 56882dc4cbc7f70a9984c33eb9bf609e1dd60763 On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz> 
On mvebu this is defined if and only if !ARM64.

Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and
ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Drop CONFIG_USB_EHCI_KIRKWOOD 2021-10-15T13:42:22+00:00 Marek Behún marek.behun@nic.cz 2021-10-09T13:27:34+00:00 645a0afb328725afa817eb15d86aca2644c33579 This config option doesn't do anything. nas220 uses USB_EHCI_MARVELL. Signed-off-by: Marek Behún <marek.behun@nic.cz> 
This config option doesn't do anything.

nas220 uses USB_EHCI_MARVELL.

Signed-off-by: Marek Behún <marek.behun@nic.cz>