u-boot.git/include/configs/nios2-generic.h, branch master

nios2: rename board nios2-generic to 3c120_devboard

2015-11-12T00:26:59+00:00

Rename board nios2-generic to 3c120_devboard. Since nios2 is
converted to driver model and device tree control of u-boot,
the nios2-generic board directory is removed. We can rename
the board back to a real board name. Now the boards maintained
in u-boot mainline are the same as Linux kernel, namely 3c120
and 10m50.

Signed-off-by: Thomas Chou 
Reviewed-by: Marek Vasut 
Acked-by: Marek Vasut

nios2: nios2-generic: do not allocate rx buf in net.c

2015-11-12T00:26:58+00:00

Do not allocate rx buf in net.c, because altera_tse allocates
its own rx buf in driver. This can save 6KB memory.

Signed-off-by: Thomas Chou

nios2: use cfi flash driver model

2015-11-12T00:26:58+00:00

Use cfi flash driver model.

Signed-off-by: Thomas Chou

nios2: trim CONFIG_SYS_MEMTEST_END

2015-11-06T04:56:46+00:00

Trim CONFIG_SYS_MEMTEST_END location.

CONFIG_SYS_MONITOR_LEN
  Reserving 256k for U-Boot at: d7fc0000
CONFIG_ENV_SIZE
CONFIG_SYS_MALLOC_LEN
  Reserving 256k for malloc() at: d7f80000
0x10000 for the rest
  Reserving 68 Bytes for Board Info at: d7f7ffbc
  Reserving 208 Bytes for Global Data at: d7f7feec
  Reserving 12000 Bytes for FDT at: d7f7d00c
  Stack

Signed-off-by: Thomas Chou

nios2: trim CONFIG_SYS_MALLOC_LEN

2015-11-06T04:56:46+00:00

Trim CONFIG_SYS_MALLOC_LEN size, because CONFIG_ENV_SIZE
is included to total memory allocation in common.h,

Signed-off-by: Thomas Chou 
Reviewed-by: Chin Liang See

nios2: remove CONFIG_SYS_INIT_SP macro

2015-11-06T01:14:12+00:00

Remove CONFIG_SYS_INIT_SP macro, as the initial stack is set to
below the u-boot code.

Signed-off-by: Thomas Chou 
Reviewed-by: Marek Vasut 
Reviewed-by: Chin Liang See

nios2: remove CONFIG_SYS_MALLOC_BASE macro

2015-11-06T01:14:12+00:00

Remove CONFIG_SYS_MALLOC_BASE macro, as it is not used by
the generic board.

Signed-off-by: Thomas Chou 
Reviewed-by: Chin Liang See

nios2: clean up macros that do not need a value in board header

2015-11-06T01:14:11+00:00

Clean up macros that do not need a value as suggested by
Marek.

Signed-off-by: Thomas Chou 
Tested-by: Marek Vasut 
Acked-by: Marek Vasut

nios2: use dram bank in board info

2015-11-06T01:14:11+00:00

Use dram bank in board info, so that it displays correct
memory values in bdinfo command.

Signed-off-by: Thomas Chou 
Acked-by: Marek Vasut

net: convert altera_tse to driver model and phylib

2015-10-23T06:55:48+00:00

Convert altera_tse to driver model and phylib.

Signed-off-by: Thomas Chou 
Reviewed-by: Marek Vasut 
Reviewed-by: Simon Glass