u-boot.git/include/configs/omap730p2.h, branch master Unnamed repository; edit this file 'description' to name the repository. omap730p2: Remove board 2013-11-11T17:17:48+00:00 Tom Rini trini@ti.com 2013-11-11T17:09:10+00:00 79c5c08d7c560aef2d5706501557b7907c2829bb Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Tom Rini <trini@ti.com>
Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24T13:44:38+00:00 Wolfgang Denk wd@denx.de 2013-07-08T07:37:19+00:00 1a4596601fd395f3afb8f82f3f840c5e00bdd57a Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
ARM: Remove unused stack and irq config defines 2012-09-01T12:58:22+00:00 Rob Herring rob.herring@calxeda.com 2012-07-13T09:44:01+00:00 3d6ba91e793808d1612152e9f9b8c51b3ca6c926 CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present in most ARM board config files. IRQs are only enabled for 1 config, so remove the unused config options for IRQ and FIQ stack size as well. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Rob Herring <rob.herring@calxeda.com> 
CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present
in most ARM board config files.

IRQs are only enabled for 1 config, so remove the unused config options
for IRQ and FIQ stack size as well.

Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20T18:26:16+00:00 Tom Rini trini@ti.com 2012-06-19T12:54:34+00:00 26750c8aee2383a026e0cf89e9310628d3a5a6a0 We provide a default table of { 9600, 19200, 38400, 57600, 115200 } in <config_fallbacks.h> which mkconfig places after <configs/...h> in the generated config file. This is used when a board has not set its own table. Signed-off-by: Tom Rini <trini@ti.com> 
We provide a default table of { 9600, 19200, 38400, 57600, 115200 }
in <config_fallbacks.h> which mkconfig places after <configs/...h> in
the generated config file.  This is used when a board has not set its
own table.

Signed-off-by: Tom Rini <trini@ti.com>
omap730p2: Remove empty misc_init_r 2012-05-15T06:31:27+00:00 Tom Rini trini@ti.com 2012-04-13T12:20:02+00:00 60bd10df8a3d553962b9f6704e055c2475a2414a We had a do-nothing misc_init_r, remove along with CONFIG_MISC_INIT_R Signed-off-by: Tom Rini <trini@ti.com> 
We had a do-nothing misc_init_r, remove along with CONFIG_MISC_INIT_R

Signed-off-by: Tom Rini <trini@ti.com>
board configs: drop NET_MULTI references 2011-10-05T20:22:16+00:00 Mike Frysinger vapier@gentoo.org 2011-10-02T10:01:28+00:00 31a4f1e5b6ee9b6335f0313dce7637cef887f84f Now that none of the core checks CONFIG_NET_MULTI, there's not much point in boards defining it. So scrub all references to it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> 
Now that none of the core checks CONFIG_NET_MULTI, there's not much point
in boards defining it.  So scrub all references to it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
omap730p2: fix build breaks 2011-06-21T20:26:21+00:00 Aneesh V aneesh@ti.com 2011-06-09T12:54:57+00:00 154f53488ecbad21fd81de199943c28e0bb23523 Provide SDRAM base address and use SRAM for initial stack Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 
Provide SDRAM base address and use SRAM for initial stack

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26T19:05:30+00:00 Wolfgang Denk wd@denx.de 2010-10-26T12:34:52+00:00 25ddd1fb0a2281b182529afbc8fda5de2dc16d96 CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org> 
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
LAN91C96: Enable NET_MULTI LAN driver 2009-12-14T05:31:26+00:00 Nishanth Menon nm@ti.com 2009-10-16T05:06:37+00:00 ac6b362a2598b8cd27beb071fa6224cf8b121e1b This modification is NOT tested on any of the platforms modified as I dont have them. please help by testing+building+fixing Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
This modification is NOT tested on any of the
platforms modified as I dont have them. please
help by testing+building+fixing

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
OMAP: rename timer divisor 2009-03-30T16:58:41+00:00 Ladislav Michl ladis@linux-mips.org 2009-03-30T16:58:41+00:00 81472d893fa565c9d300928a40e504a689bde131 Divisor field is called PTV not PVT. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Divisor field is called PTV not PVT.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>