u-boot.git/include/configs/pcu_e.h, branch origin Unnamed repository; edit this file 'description' to name the repository. Fix problems with SNTP support; 2005-04-02T22:37:54+00:00 wdenk wdenk 2005-04-02T22:37:54+00:00 414eec35e3832f4f9ce8a25ace7ead638be1f76f enable SNTP support in some boards. 
enable SNTP support in some boards.
* Patch by Mark Jonas: Remove config.tmp files only when 2004-04-08T22:31:29+00:00 wdenk wdenk 2004-04-08T22:31:29+00:00 7e780369e43ebf5c9e337dfad84dd36b2a08a21f unconfiguring the board * Adapt RMU board for bigger flash memory * Test fix for ethernet problems on MPC5200 
  unconfiguring the board

* Adapt RMU board for bigger flash memory

* Test fix for ethernet problems on MPC5200
* Patch by Martin Krause, 17 Jul 2003: 2003-07-17T23:16:40+00:00 wdenk wdenk 2003-07-17T23:16:40+00:00 2535d60277cc295adf75cd5721dcecd840c69a63 add delay to get I2C working with "imm" command and s3c24x0_i2c.c * Patch by Richard Woodruff, 17 July 03: - Fixed bug in OMAP1510 baud rate divisor settings. * Patch by Nye Liu, 16 July 2003: MPC860FADS fixes: - add MPC86xADS support (uses MPC86xADS.h) - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) o PLPRCR changes o BRG changes (EXTAL/XTAL restricted to 10MHz) o don't trust gclk() software measurement by default, depend on CONFIG_8xx_GCLK_FREQ - add DRAM SIMM not installed detection - use more "correct" SDRAM initialization sequence - allow different SDRAM sizes (8xxADS has 8M) - default DER is 0 - remove unused MAMR defines from FADS860T.h (all done in fads.c) - rename MAMR/MBMR defines to be more consistent. Should eventually be merged into MxMR to better reflect the PowerQUICC datasheet. * Patch by Yuli Barcohen, 16 Jul 2003: support new Motorola PQ2FADS-ZU evaluation board which replaced MPC8260ADS and MPC8266ADS 
  add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS
Initial revision 2002-08-19T11:57:05+00:00 wdenk wdenk 2002-08-19T11:57:05+00:00 0f8c9768ff83244c49857a0c79fe04e947f387ce