u-boot.git/include/configs/poleg.h, branch main

Arm: npcm: fix npcm7xx boot to kernel error

2024-05-03T18:22:59Z

Add mem and console env information and modify the wrong earlycon env. Signed-off-by: Jim Liu

configs: npcm: Support more uart baud rate

2023-10-31T17:08:01Z

Add uart baud rate table to arbel(npcm8xx) and poleg(npcm7xx) Signed-off-by: Jim Liu [trini: Rework slightly] Signed-off-by: Tom Rini

board: nuvoton: add env setting for boot to linux

2023-07-14T16:52:18Z

add console and mem env to boot to linux kernel Signed-off-by: Jim Liu

global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG

2022-12-23T15:09:42Z

Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini

Convert CONFIG_HOSTNAME et al to Kconfig

2022-12-22T15:31:48Z

This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini

global: Move remaining CONFIG_SYS_* to CFG_SYS_*

2022-12-05T21:06:08Z

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

2022-12-05T21:06:07Z

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

Convert CONFIG_SYS_L2_PL310 to Kconfig

2022-09-01T21:18:42Z

This converts CONFIG_SYS_L2_PL310 to Kconfig. For omap2 and mvebu the 'select SYS_L2_PL310' locations were determined using ./tools/moveconfig -i CONFIG_SYS_L2_PL310. For mx6 I manually chose ARCH_MX6 as 'select' location. The correctness has been verified using $ ./tools/moveconfig.py -f ARCH_MX6 ~SYS_L2_PL310 ~SYS_L2CACHE_OFF 0 matches That means whenever an ARCH_MX6 board had SYS_L2_PL310 disabled, this was correctly reflected in SYS_L2CACHE_OFF. Thus it's safe to insert the 'select' statement under ARCH_MX6. Signed-off-by: Philip Oberfichtner

Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

2022-06-06T16:09:19Z

- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini

Convert CONFIG_SYS_CBSIZE to Kconfig

2022-06-06T16:09:00Z

This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini