u-boot.git/include/configs/sc520_cdp.h, branch master

x86: Remove Unmaintained Boards

2010-09-12T21:20:02+00:00

The SC520 CDP boards originally implemented by Daniel Engström are now
very broken. Attempts to contact Daniel via the email address on the
copyright notice have failed. Remove these boards from mainline

i386: Fix malloc initialization

2009-12-05T00:02:10+00:00

Signed-off-by: Graeme Russ

Misc sc520 cdp fixups

2009-09-04T19:55:57+00:00

Now that the PCI, SATA et al compile problems have been resolved, the
cludge that was applied to avoid them can be removed

Signed-off-by: Graeme Russ

i386: Misc PCI fixups

2009-09-04T19:52:52+00:00

Change PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY (Originally done in
commit ff4e66e93c1a, regressed by commit 6d7f610b09f8)

Cast PCI_ROM_ADDRESS_MASK to u32

Wrap probe_pci_video() call inside #ifdef CONFIG_VIDEO

Change call to pci_find_class() to pci_find_devices(). This is based on a
patch submitted on 1st March 2007 (Patch that fixes the compilation errors
for sc520_cdp board) by mushtaq_k

This patch requires that PCI_VIDEO_VENDOR_ID and PCI_VIDEO_DEVICE_ID be
specified in the board config file.  Dummy values have been added for the
SC520 CDP board to enable compilation, but since I do not have one of these,
I do know what the values should be

Signed-off-by: Graeme Russ

Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ

2009-03-29T14:04:51+00:00

Signed-off-by: Ladislav Michl

Separate mtdparts command from jffs2

2009-03-20T21:39:14+00:00

Currently the mtdparts commands are included in the jffs2 command support.
This doesn't make sense anymore since other commands (e.g. UBI) use this
infrastructure as well now. This patch separates the mtdparts commands from
the jffs2 commands making it possible to only select mtdparts when no JFFS2
support is needed.

Signed-off-by: Stefan Roese 
Signed-off-by: Kyungmin Park

Add basic relocation to i386 port

2009-03-20T21:39:13+00:00

Signed-off-by: Graeme Russ

Rewrite i386 interrupt handling

2009-03-20T21:39:13+00:00

Rewrite interrupt handling functionality for the i386 port. Separated
functionality into separate CPU and Architecture components.

It appears as if the i386 interrupt handler functionality was intended
to allow multiple handlers to be installed for a given interrupt.
Unfortunately, this functionality was not fully implemented and also
had the problem that irq_free_handler() does not allow the passing
of the handler function pointer and therefore could never be used to
free specific handlers that had been installed for a given IRQ.

There were also various issues with array bounds not being fully
tested.

I had two objectives in mind for the new implementation:

1) Keep the implementation as similar as possible to existing
   implementations. To that end, I have used the leon2/3
   implementations as the reference

2) Seperate CPU and Architecture specific elements. All specific i386
   interrupt functionality is now in cpu/i386/ with the high level
   API and architecture specific code in lib_i386. Functionality
   specific to the PC/AT architecture (i.e. cascaded i8259 PICs) has
   been further split out into an individual file to allow for the
   implementation of the PIC architecture of the SC520 CPU (supports
   more IRQs)

Signed-off-by: Graeme Russ

Rename SC520 Configuration Options

2009-03-20T21:39:12+00:00

Options are now all uniformly CONFIG_SYS_SC520_

Removed all references to CONFIG_SYS_RESET_GENERIC

2009-01-24T00:15:33+00:00

Generic i386 reset - #define made redundant by weak function

Signed-off-by: Graeme Russ