u-boot.git/include/configs/sequoia.h, branch v2009.03 Unnamed repository; edit this file 'description' to name the repository. NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23T16:32:51+00:00 Wolfgang Grandegger wg@grandegger.com 2009-01-16T17:55:54+00:00 6c869637fef31e66380f0ea1d49690a2e26ec0d7 This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and changes the default from 8 to 1 for the legacy and the new MTD NAND layer. This allows to remove all NAND_MAX_CHIPS definitions in the board config files because none of the boards use multi chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440 define #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE but that's bogus and did not work anyhow. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Scott Wood <scottwood@freescale.com> 
This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
changes the default from 8 to 1 for the legacy and the new MTD
NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
in the board config files because none of the boards use multi
chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
define

 #define NAND_MAX_CHIPS          CONFIG_SYS_MAX_NAND_DEVICE

but that's bogus and did not work anyhow.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
rename CFG_ macros to CONFIG_SYS 2008-10-18T19:54:03+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-10-16T13:01:15+00:00 6d0f6bcf337c5261c08fabe12982178c2c489d76 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references 2008-10-14T12:45:31+00:00 Peter Tyser ptyser@xes-inc.com 2008-09-23T17:39:40+00:00 abbb90666d5ef2f500ebbedbb80ff60adc56b043 Signed-off-by: Peter Tyser <ptyser@xes-inc.com> 
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
rename CFG_ENV macros to CONFIG_ENV 2008-09-10T20:48:06+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-09-10T20:48:06+00:00 0e8d158664a913392cb01fb11a948d83f72e105e Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH 2008-09-10T20:48:04+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-09-10T20:48:04+00:00 5a1aceb0689e2f731491838970884a673ef7e7d3 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND 2008-09-10T20:47:58+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-09-10T20:47:58+00:00 51bfee192099206a4397f15f3b93516e01f58ab0 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
ppc4xx: Increase image size for NAND boot target 2008-08-30T09:24:44+00:00 Stefan Roese sr@denx.de 2008-08-29T10:06:27+00:00 3d4a746e2fb4545f07d871049805fb34ae97cc94 This is needed since now with HUSH enabled (amcc-common.h) the image read from NAND exceeds the previous limit. Signed-off-by: Stefan Roese <sr@denx.de> 
This is needed since now with HUSH enabled (amcc-common.h) the image
read from NAND exceeds the previous limit.

Signed-off-by: Stefan Roese <sr@denx.de>
drivers/mtd: Move conditional compilation to Makefile 2008-08-12T23:40:42+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-08-12T23:40:42+00:00 00b1883a4cac59d97cd297b1a3a398db85982865 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic. 2008-08-07T10:06:18+00:00 Steven A. Falco sfalco@harris.com 2008-08-06T19:42:52+00:00 eab1007334b93a6209f1ec33615e26ef5311ede7 The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO configuration to match the schematic, and also sets the SDR0_PFC1 register to select the corresponding mode for the UARTs. Signed-off-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: Stefan Roese <sr@denx.de> 
The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
configuration to match the schematic, and also sets the SDR0_PFC1 register to
select the corresponding mode for the UARTs.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: Stefan Roese <sr@denx.de>
ppc4xx: Unify AMCC's board config files (part 3/3) 2008-06-06T13:55:21+00:00 Stefan Roese sr@denx.de 2008-06-06T13:55:21+00:00 72675dc6c06a48846d180106161d49dd714383cc This patch series unifies the AMCC eval board ports by introducing a common include header for all AMCC eval boards: include/configs/amcc-common.h This header now includes all common configuration options/defines which are removed from the board specific headers. The reason for this is ease of maintenance and unified look and feel of all AMCC boards. Signed-off-by: Stefan Roese <sr@denx.de> 
This patch series unifies the AMCC eval board ports by introducing
a common include header for all AMCC eval boards:

include/configs/amcc-common.h

This header now includes all common configuration options/defines which
are removed from the board specific headers.

The reason for this is ease of maintenance and unified look and feel
of all AMCC boards.

Signed-off-by: Stefan Roese <sr@denx.de>