u-boot.git/include/configs/stm32mp1.h, branch master Unnamed repository; edit this file 'description' to name the repository. board: stmp32mp1: split board and SOC STM32MP15 configuration 2021-11-10T16:03:36+00:00 Patrick Delaunay patrick.delaunay@foss.st.com 2021-10-22T08:19:25+00:00 c67ca25dfc5c1da7359ab72cdf9b5e5a5579c162 Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> 
Add a configuration file "stm32mp15_st_common.h" to handle the
STMicroelectronics boards configuration and rename stm32mp1.h to
"stm32mp15_common.h" to handle the generic STM32MP15x series configuration.

The configuration file "dh_stm32mp1.h" is also renamed to
"stm32mp15_dh_dhcom" for the configuration of board based on the
dhelectronics STM32MP15x SOM.

In the STMicroelectronics board configuration the default bootcmd
"bootcmd_stm32mp" is updated to only select the extlinux file found on
SD-Card on STM32MP15x EV1 for boot from NOR device.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm 2021-10-12T16:01:00+00:00 Tom Rini trini@konsulko.com 2021-10-12T16:01:00+00:00 776bf6a5457eb0c61c367d1ee7e45733a1c72ed6 - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com> 
- Disable ATAGS for STM32 MCU and MPU boards
- Disable bi_boot_params for STM32 MCU and MPU boards
- Update stm32-usbphyc node management
- Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards
- Convert some USB config flags to Kconfig for various boards
- Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board
- Remove specific CONFIG_STV0991 flags
- Remove unused CONFIG_USER_LOWLEVEL_INIT flag
- Add ofdata_to_platdata() callback for stm32_spi driver
- Update for stm32f7_i2c driver
- Remove gpio_hog_probe_all() from STM32 MP1 board
- Fix bind command

Signed-off-by: Tom Rini <trini@konsulko.com>
Revert "configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp" 2021-10-08T06:22:43+00:00 Marek Vasut marex@denx.de 2021-10-04T11:48:08+00:00 2d0808161b2b07a21119c2037c088dae1ab80c0a This reverts commit d5d726d3cc47691ace3c68fa31147ad104aaf579, which breaks boards which ship with multiple SD/eMMC sockets. This stm32mp1.h config is not used only by the ST reference boards, but all the other STM32MP1 based boards in U-Boot, so changes to this stm32mp1.h cannot break the other boards. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> 
This reverts commit d5d726d3cc47691ace3c68fa31147ad104aaf579,
which breaks boards which ship with multiple SD/eMMC sockets.

This stm32mp1.h config is not used only by the ST reference
boards, but all the other STM32MP1 based boards in U-Boot, so
changes to this stm32mp1.h cannot break the other boards.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
arm: stm32: Disable ATAGs support 2021-10-08T06:15:39+00:00 Patrick Delaunay patrick.delaunay@foss.st.com 2021-09-02T10:02:06+00:00 b703dcb0fe5d296bb55a8932147d9f754625b739 These platforms never had to support an ATAGs-based Linux Kernel, so remove the options. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> 
These platforms never had to support an ATAGs-based Linux Kernel, so
remove the options.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig 2021-10-06T13:16:23+00:00 Tom Rini trini@konsulko.com 2021-09-22T18:50:34+00:00 c0ad62c5f7535bf13b24aab103356f827f40d0cd This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_SYS_NAND_ONFI_DETECTION

Signed-off-by: Tom Rini <trini@konsulko.com>
arm: Disable ATAGs support 2021-09-07T20:22:30+00:00 Tom Rini trini@konsulko.com 2021-08-30T13:16:30+00:00 9774462e34faaa64a91eb9c68b438a52d22bba6a With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com> 
With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and
stemmy, disable ATAG support.  A large number of platforms had enabled
support but never supported a kernel so old as to require it.  Further,
some platforms are old enough to support both, but are well supported by
devicetree booting, and have been for a number of years.  This is
because some of the ATAGs related functions have been re-used to provide
the same kind of information, but for devicetree or just generally to
inform the user.  When needed still, rename these functions to
get_board_revision() instead, to avoid conflicts.  In other cases, these
functions were simply unused, so drop them.

Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Stefan Bosch <stefan_b@posteo.net>
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_SYS_LOAD_ADDR to Kconfig 2021-08-31T21:46:37+00:00 Tom Rini trini@konsulko.com 2021-08-23T14:25:31+00:00 49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com> 
Now that we have consistent usage, migrate this symbol to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR 2021-08-31T21:46:37+00:00 Tom Rini trini@konsulko.com 2021-08-23T14:25:30+00:00 72d81360aabd0485d3832d292bbea29c7c4554ef - In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not CONFIG_LOADADDR. - Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as noted, we use CONFIG_SYS_LOADADDR. Signed-off-by: Tom Rini <trini@konsulko.com> 
- In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not
  CONFIG_LOADADDR.
- Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as
  noted, we use CONFIG_SYS_LOADADDR.

Signed-off-by: Tom Rini <trini@konsulko.com>
treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USB 2021-07-19T01:05:31+00:00 Tom Rini trini@konsulko.com 2021-07-09T14:11:55+00:00 e8d3eaadcd9474a7e2e2f3af51ad044c3ff2ad80 As the logic here is only used when we have a USB host controller, test on CONFIG_USB_HOST rather than CONFIG_USB in general. This lets us move towards using CONFIG_USB only as a menu symbol to say that we have some form of USB, and then USB_HOST or USB_GADGET depending on the role that USB plays within the build. Signed-off-by: Tom Rini <trini@konsulko.com> 
As the logic here is only used when we have a USB host controller, test
on CONFIG_USB_HOST rather than CONFIG_USB in general.  This lets us move
towards using CONFIG_USB only as a menu symbol to say that we have some
form of USB, and then USB_HOST or USB_GADGET depending on the role that
USB plays within the build.

Signed-off-by: Tom Rini <trini@konsulko.com>
configs: stm32mp1: remove splashimage and add fdtoverlay_addr_r 2021-07-16T07:28:46+00:00 Patrick Delaunay patrick.delaunay@foss.st.com 2021-06-28T12:42:08+00:00 918609ccfa5bc762d7427d6387626211e4e1c8c1 Add the variable used by PXE command for fdtoverlays support since the commit 69076dff2284 ("cmd: pxe: add support for FDT overlays"). Reused the unused "splashimage" address as CONFIG_SPLASH_SOURCE and CONFIG_VIDEO_LOGO are not activated and U-Boot display the "BACKGROUND" image found in extlinux.conf to manage splashscreen on stm32mp1 boards. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> 
Add the variable used by PXE command for fdtoverlays support
since the commit 69076dff2284 ("cmd: pxe: add support for FDT overlays").

Reused the unused "splashimage" address as CONFIG_SPLASH_SOURCE and
CONFIG_VIDEO_LOGO are not activated and U-Boot display the "BACKGROUND"
image found in extlinux.conf to manage splashscreen on stm32mp1 boards.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>