u-boot.git/include/configs/stm32mp25_common.h, branch main

rename NET to NET_LEGACY

2026-04-27T17:26:40Z

Highlight that NET really is the legacy networking stack by renaming the option to NET_LEGACY. This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL. The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is using the legacy networking app so this seems fine to do. This also has the benefit of removing potential confusion on NET being a specific networking stack instead of "any" network stack. Signed-off-by: Quentin Schulz Acked-by: Ilias Apalodimas Reviewed-by: Peter Robinson Reviewed-by: Tom Rini

configs: stm32mp25: add PXE boot support

2025-04-25T14:00:23Z

Configure the required configuration to allow PXE boot, without autoload support by default. Signed-off-by: Patrick Delaunay Signed-off-by: Patrice Chotard

configs: stm32mp25: add USB host boot support

2025-04-25T14:00:23Z

Add support for booting from USB pen drive, since USB host port is available on the STM32MP2. Signed-off-by: Patrice Chotard

configs: stm32mp25: add support of NAND and NOR boot

2025-04-25T14:00:22Z

Add support of UBI boot and activate the needed configuration for U-Boot environment in UBI volume for NAND or in a MTD partition for NOR device, SPI Flash: ENV_OFFSET, ENV_OFFSET_REDUND, ENV_SECT_SIZE is aligned with the default MTD partition on NOR device of the STMicroelectronics boards. Signed-off-by: Patrick Delaunay Signed-off-by: Patrice Chotard

configs: stm32mp25: add bootcmd for stm32mp25 platform

2025-04-25T14:00:22Z

Handle boot for the 3 instance of MMC and call the command stm32prog for serial boot on USB or on UART as it is done for other STM32MP platform. Signed-off-by: Patrick Delaunay Signed-off-by: Patrice Chotard

stm32mp2: initial support

2023-11-13T09:55:38Z

Add initial support for STM32MP2 SoCs family. SoCs information are available here : https://www.st.com/content/st_com/en/campaigns/microprocessor-stm32mp2.html Migrate all MP1 related code into stm32mp1/ directory Create stm32mp2 directory dedicated for STM32MP2 SoCs. Common code to MP1, MP13 and MP25 is kept into arch/arm/mach-stm32/mach-stm32mp directory : - boot_params.c - bsec - cmd_stm32key - cmd_stm32prog - dram_init.c - syscon.c - ecdsa_romapi.c For STM32MP2, it also : - adds memory region description needed for ARMv8 MMU. - enables early data cache before relocation. During the transition before/after relocation, the MMU, initially setup at the beginning of DDR, must be setup again at a correct address after relocation. This is done in enables_caches() by disabling cache, force arch.tlb_fillptr to NULL which will force the MMU to be setup again but with a new value for gd->arch.tlb_addr. gd->arch.tlb_addr has been updated after relocation in arm_reserve_mmu(). Signed-off-by: Patrice Chotard Reviewed-by: Patrick Delaunay