u-boot.git/include/configs/sun5i.h, branch master

sunxi: configs: streamline include/configs/sun*.h wrappers

2022-07-18T10:25:09+00:00

For mostly historic reasons we had configuration headers for each
Allwinner CPU "family". These days they are mostly just including one
common header, with the rest being somewhat empty.
There were attempts to remove them, and to just use the one common header
to begin with, but this has implications to the build system, which me
might not be ready for, yet.

To document this behaviour, and to avoid something sneaking in over
time, make those files all the same (minus the CPU family name and
the copyrights), and add a comment explaining that.
This makes it easier to just remove those files later on, when needed
and possible.

Signed-off-by: Andre Przywara 
Reviewed-by: Tom Rini

arm: Finish migration of CONFIG_MACH_TYPE

2021-09-07T23:17:32+00:00

As this is only useful when booting with ATAGs, which are now largely
disabled, remove this value for the remaining platforms.  We have a few
places in the code that had been testing for MACH_TYPE as a sort of
internal logic.  Update those to use different but still correct CONFIG
symbols.

Cc: Phil Sutter 
Signed-off-by: Tom Rini

sunxi: usb: Switch to Generic host controllers

2019-01-18T16:49:09+00:00

Onc of key blocker for using USB Generic host controller
drivers in Allwinner are CLK and RESET drivers, now these
available for USB usage.

So switch sunxi USB use EHCI and OHCI Generic controllers.

Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD
where it already have USB_EHCI_HCD

Signed-off-by: Jagan Teki 
Acked-by: Maxime Ripard

configs: sunxi: Drop CONFIG_SUNXI_USB_PHYS

2018-07-31T06:13:07+00:00

Now number of PHY on Allwinner is handling via dt data,
drivers at phy/allwinner/phy-sun4i-usb.c

Signed-off-by: Jagan Teki 
Tested-by: Jagan Teki

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD

2017-05-15T14:40:05+00:00

In order to be able to migrate the various SoC EHCI CONFIG options we
first need to finish the switch from CONFIG_USB_EHCI to
CONFIG_USB_EHCI_HCD.

Cc: Marek Vasut 
Signed-off-by: Tom Rini 
Reviewed-by: Marek Vasut

sunxi: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines

2016-10-30T10:38:04+00:00

ARCH_SUNXI selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT
is not used.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede

Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"

2015-06-28T15:46:31+00:00

This reverts commit f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a.

This patch did not have a full and proper copyright/S-o-b chain.

Signed-off-by: Ian Campbell 

Conflicts:
	include/configs/sun6i.h
	include/configs/sun8i.h

sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory

2015-05-29T11:46:36+00:00

This commit adds support to the sunxi SPL to load u-boot from the internal
NAND. Note this only adds support to access the boot partitions to load
u-boot, full NAND support to load the kernel, etc. from the nand data
partition will come later.

Signed-off-by: Roy Spliet 
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede

sunxi: usb: Do not call phy_probe from hcd code

2015-05-04T14:51:55+00:00

The 2/3 usb-phys on the sunxi SoCs are really a single separate functional
block, and are modelled as such in devicetree. So once we've moved all the
sunxi usb code to the driver-model then phy_probe will be called once
for the entire block from the driver-model enumeration code.

Move to this now as this also avoids problems with phy_probe being called
multiple times once we introduce ohci support. This also allows us to get rid
of the sunxi_usb_phy_enabled_count variable as phy_probe now is guaranteed
to be called only once.

Since we're effectively rewriting the probe / remove functions, move them
to the end of the file while we are at it, as that is the most logical place
for them.

Signed-off-by: Hans de Goede 
Acked-by: Ian Campbell