u-boot.git/include/configs/sun6i.h, branch u-boot-2016.09.y

ARM: armv7: move ARMV7_PSCI_NR_CPUS to Kconfig

2016-09-07T12:48:54+00:00

Move this option to Kconfig and set its default value to 4; this
increases the number of supported CPUs for some boards.

It consumes 1KB memory per CPU for PSCI stack, but it should not
be a big deal, given the amount of memory used for the modern OSes.

Reviewed-by: Alexander Graf 
Signed-off-by: Masahiro Yamada

ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig

2016-09-07T12:48:51+00:00

Add ARCH_SUPPORT_PSCI as a non-configurable option that platforms
can select.  Then, move CONFIG_ARMV7_PSCI, which is automatically
enabled if both ARMV7_NONSEC and ARCH_SUPPORT_PSCI are enabled.

Reviewed-by: Alexander Graf 
Signed-off-by: Masahiro Yamada

sunxi: Define CONFIG_ARMV7_SECURE_MAX_SIZE for sun6i/sun7i

2016-07-15T13:54:57+00:00

Both sun6i and sun7i have 64 KB of secure SRAM.

Signed-off-by: Chen-Yu Tsai 
Signed-off-by: Hans de Goede

sunxi: Add support for Allwinner A64 SoCs

2016-04-01T07:52:28+00:00

The Allwinner A64 SoC is used in the Pine64. This patch adds
all bits necessary to compile U-Boot for it running in AArch64
mode.

Unfortunately SPL is not ready yet due to legal problems, so
we need to boot using the binary boot0 for now.

Signed-off-by: Siarhei Siamashka 
[agraf: remove SPL code, move to AArch64]
Signed-off-by: Alexander Graf 
Acked-by: Hans de Goede 
Signed-off-by: Hans de Goede

Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"

2015-06-28T15:46:31+00:00

This reverts commit f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a.

This patch did not have a full and proper copyright/S-o-b chain.

Signed-off-by: Ian Campbell 

Conflicts:
	include/configs/sun6i.h
	include/configs/sun8i.h

ARM: sunxi: Enable PSCI for sun6i

2015-05-29T11:46:36+00:00

Now that we have a PSCI backend for sun6i, enable it.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Hans de Goede 
Signed-off-by: Hans de Goede

sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory

2015-05-29T11:46:36+00:00

This commit adds support to the sunxi SPL to load u-boot from the internal
NAND. Note this only adds support to access the boot partitions to load
u-boot, full NAND support to load the kernel, etc. from the nand data
partition will come later.

Signed-off-by: Roy Spliet 
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede

sunxi: usb: Do not call phy_probe from hcd code

2015-05-04T14:51:55+00:00

The 2/3 usb-phys on the sunxi SoCs are really a single separate functional
block, and are modelled as such in devicetree. So once we've moved all the
sunxi usb code to the driver-model then phy_probe will be called once
for the entire block from the driver-model enumeration code.

Move to this now as this also avoids problems with phy_probe being called
multiple times once we introduce ohci support. This also allows us to get rid
of the sunxi_usb_phy_enabled_count variable as phy_probe now is guaranteed
to be called only once.

Since we're effectively rewriting the probe / remove functions, move them
to the end of the file while we are at it, as that is the most logical place
for them.

Signed-off-by: Hans de Goede 
Acked-by: Ian Campbell

sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clock

2015-03-29T11:36:03+00:00

make the CPU clock selectable via Kconfig

this removes the sunxi specific CONFIG_CLK_FULL_SPEED defined in each
soc header and replaces it's use in board/sunxi/board.c with
CONFIG_SYS_CLK_FREQ from Kconfig which allows us to configure board
specific frequency on boot

Signed-off-by: Iain Paton 
[hdegoede@redhat.com s/CONFIG_SYS_CLK_FREQ/CONFIG_TIMER_CLK_FREQ/ for the
 arch-timer clk speed on sun7i to fix mis-compile on sun7i]
Acked-by: Hans de Goede 
Signed-off-by: Hans de Goede

sunxi: Use a common CONFIG_SYS_PROMPT

2015-01-23T14:15:51+00:00

The CPU info is already logged during boot e.g.
   CPU:    Allwinner A20 (SUN7I)
so the prompt is just one more thing to change for each new SoC, just makes it
"sunxi#" instead.

Signed-off-by: Ian Campbell 
Acked-by: Hans de Goede 
Signed-off-by: Hans de Goede