u-boot.git/include/configs/trab.h, branch master

ARM: drop unsupported 'trab' board

2011-06-22T18:00:51+00:00

The 'trab' board configuration is broken, and there is nobody who is
interested and willing to fix it.  Drop it.

This includes support for VFD displays which have always been used by
this board only.

Signed-off-by: Wolfgang Denk

Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

2010-10-26T19:05:30+00:00

CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new  file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk 
Acked-by: Kumar Gala

Add a unified s3c24x0 header file

2009-11-27T22:26:13+00:00

This patch adds a unified s3c24x0 cpu header file that selects the header
file for the specific s3c24x0 cpu from the SOC and CPU configs defined in
board config file. This removes the current chain of s3c24-type #ifdef's
from the s3c24x0 code.

Signed-off-by: Kevin Morfitt 
Signed-off-by: Minkyu Kang

CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards

2009-10-14T02:13:55+00:00

This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and
s3c2410 cpu's which fixes various problems such as the timeouts in tftp being
too short.

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't
have any s3c2400 or s3c2410 boards but need this patch applying before I can
submit patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets
and no new warnings or errors were found.

It was originally submitted on 21/06/2009 but didn't get into the 2009.08
release, and Jean-Pierre made one comment on the original patch (see
http://lists.denx.de/pipermail/u-boot/2009-July/055470.html). I've made two
changes to the original patch:
- it's been re-based to the current release
- I've re-named get_timer_raw() to get_ticks() in response to Jean-Pierre's comment

This affects the sbc2410, smdk2400, smdk2410 and trab boards. I've copied it
directly to the maintainers of all except the sbc2410 which doesn't have an
entry in MAINTAINERS.

Signed-off-by: Kevin Morfitt 
Tested-by: Wolfgang Denk 
Signed-off-by: Minkyu Kang

Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API

2009-08-25T20:35:54+00:00

All in-tree boards that use this controller have CONFIG_NET_MULTI added
Also:
  - changed CONFIG_DRIVER_CS8900 to CONFIG_CS8900
  - changed CS8900_BASE to CONFIG_CS8900_BASE
  - changed CS8900_BUS?? to CONFIG_CS8900_BUS??
  - cleaned up line lengths
  - modified VCMA9 command function that accesses the device
  - removed MAC address initialization from lib_arm/board.c

Signed-off-by: Ben Warren 
Tested-by: Wolfgang Denk 
Acked-by: Wolfgang Denk

mtd: MTD related config header changes (mtdparts command)

2009-06-12T18:45:47+00:00

By changing the cmd_mtdparts to only use the MTD infrastructure and
not the direct interface to the CFI NOR FLASH driver we now need
to add the MTD infrastructure to all boards using those mtdparts
commands. This patch adds those components:

CONFIG_MTD_DEVICE (for all FLASH types)

plus

CONFIG_FLASH_CFI_MTD (for NOR FLASH)

To all board maintainers: Please test this on your platforms and
report any problems/issues found. Thanks.

Signed-off-by: Stefan Roese 
Cc: Wolfgang Denk 
Cc: Ron Madrid 
Cc: Georg Schardt 
Cc: Michal Simek 
Cc: Ladislav Michl 
Cc: Martin Krause 
Cc: Gary Jennejohn 
Cc: Ricardo Ribalda

Fix e-mail address of Gary Jennejohn.

2009-05-15T20:11:59+00:00

Signed-off-by: Detlev Zundel

s3c24x0: move serial driver to drivers/serial

2009-03-30T16:58:39+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ

2009-03-29T14:04:51+00:00

Signed-off-by: Ladislav Michl

Separate mtdparts command from jffs2

2009-03-20T21:39:14+00:00

Currently the mtdparts commands are included in the jffs2 command support.
This doesn't make sense anymore since other commands (e.g. UBI) use this
infrastructure as well now. This patch separates the mtdparts commands from
the jffs2 commands making it possible to only select mtdparts when no JFFS2
support is needed.

Signed-off-by: Stefan Roese 
Signed-off-by: Kyungmin Park