u-boot.git/include/configs/trimslice.h, branch master Unnamed repository; edit this file 'description' to name the repository. ARM: tegra: replace per-device config headers with generic Tegra 2025-04-12T08:11:05+00:00 Svyatoslav Ryhel clamor95@gmail.com 2025-03-31T14:18:18+00:00 9ee12daa591b8adefa8ae221295a85e2ee467742 Most device headers contain SoC specific part and common Tegra post part. Add a generic header which can be used by any Tegra device of one of the supported SoC generations (T20, T30, T114, T124 or T210) without need in device specific configuration. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> 
Most device headers contain SoC specific part and common Tegra post part.
Add a generic header which can be used by any Tegra device of one of the
supported SoC generations (T20, T30, T114, T124 or T210) without need in
device specific configuration.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
ARM: tegra: convert CFG_TEGRA_BOARD_STRING into Kconfig option 2025-04-12T06:48:30+00:00 Svyatoslav Ryhel clamor95@gmail.com 2025-03-31T13:44:24+00:00 ee3462160cf2fdf29b44ef83df0265a19c37bc0a Convert CFG_TEGRA_BOARD_STRING into Kconfig option and move it into device board Kconfig. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> 
Convert CFG_TEGRA_BOARD_STRING into Kconfig option and move it into device
board Kconfig.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
ARM: tegra: board: set CFG_SYS_NS16550_COM1 according to TEGRA_ENABLE_UART 2025-04-12T06:48:30+00:00 Svyatoslav Ryhel clamor95@gmail.com 2025-03-31T06:33:17+00:00 11bf63c23028f54d299a24c494242a11dcb387c7 Link CFG_SYS_NS16550_COM1 value to chosen CONFIG_TEGRA_ENABLE_UART Tegra wide. Remove all CFG_SYS_NS16550_COM1 from device headers. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> 
Link CFG_SYS_NS16550_COM1 value to chosen CONFIG_TEGRA_ENABLE_UART Tegra
wide. Remove all CFG_SYS_NS16550_COM1 from device headers.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
global: Migrate CONFIG_TEGRA_BOARD_STRING to CFG 2022-12-23T15:15:12+00:00 Tom Rini trini@konsulko.com 2022-12-04T15:13:58+00:00 e660e972c44f53c8d90dfcb2d6b3564b325bec66 Perform a simple rename of CONFIG_TEGRA_BOARD_STRING to CFG_TEGRA_BOARD_STRING Signed-off-by: Tom Rini <trini@konsulko.com> 
Perform a simple rename of CONFIG_TEGRA_BOARD_STRING to CFG_TEGRA_BOARD_STRING

Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_TEGRA_ENABLE_UARTA et al to Kconfig 2022-12-22T15:31:48+00:00 Tom Rini trini@konsulko.com 2022-12-02T21:42:45+00:00 d14f3f272519a5525d93ec98cbdd4d9eec7db6e9 This converts the following to Kconfig: CONFIG_TEGRA_ENABLE_UARTA CONFIG_TEGRA_ENABLE_UARTB CONFIG_TEGRA_ENABLE_UARTC CONFIG_TEGRA_ENABLE_UARTD CONFIG_TEGRA_SPI CONFIG_TEGRA_UARTA_GPU CONFIG_TEGRA_UARTA_SDIO1 CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_TEGRA_ENABLE_UARTA
   CONFIG_TEGRA_ENABLE_UARTB
   CONFIG_TEGRA_ENABLE_UARTC
   CONFIG_TEGRA_ENABLE_UARTD
   CONFIG_TEGRA_SPI
   CONFIG_TEGRA_UARTA_GPU
   CONFIG_TEGRA_UARTA_SDIO1
   CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3
   CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1

Signed-off-by: Tom Rini <trini@konsulko.com>
global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_* 2022-12-05T21:06:07+00:00 Tom Rini trini@konsulko.com 2022-11-16T18:10:28+00:00 91092132bac0ae768beb76c12ef8be732ea6ba3a The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550 namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
arm: Finish migration of CONFIG_MACH_TYPE 2021-09-07T23:17:32+00:00 Tom Rini trini@konsulko.com 2021-08-30T13:16:32+00:00 5f588f831b7459ea910aaf75f4ddd2522987b0e6 As this is only useful when booting with ATAGs, which are now largely disabled, remove this value for the remaining platforms. We have a few places in the code that had been testing for MACH_TYPE as a sort of internal logic. Update those to use different but still correct CONFIG symbols. Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: Tom Rini <trini@konsulko.com> 
As this is only useful when booting with ATAGs, which are now largely
disabled, remove this value for the remaining platforms.  We have a few
places in the code that had been testing for MACH_TYPE as a sort of
internal logic.  Update those to use different but still correct CONFIG
symbols.

Cc: Phil Sutter <phil@nwl.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
env: Finish migration of common ENV options 2019-11-20T23:32:09+00:00 Tom Rini trini@konsulko.com 2019-11-19T01:02:10+00:00 a09fea1d28fe3c69a64bee092f5a764274d26ca2 - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> 
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Convert CONFIG_ENV_SPI_* to Kconfig 2019-03-25T21:36:59+00:00 Patrick Delaunay patrick.delaunay@st.com 2019-02-27T14:20:38+00:00 abe66b1b5decf9cc2fb5daad42c9e870e5b99b67 This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
This converts the following to Kconfig:
  CONFIG_ENV_SPI_BUS
  CONFIG_ENV_SPI_CS
  CONFIG_ENV_SPI_MAX_HZ
  CONFIG_ENV_SPI_MODE

Most of time these value are not needed, CONFIG_SF_DEFAULT
with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
to force the associated value for the environment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Convert CONFIG_SF_DEFAULT_* to Kconfig 2019-03-25T21:36:53+00:00 Patrick Delaunay patrick.delaunay@st.com 2019-02-27T14:20:36+00:00 14453fbfadc2f98ca35d6033140466c7a4b4947a This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
This converts the following to Kconfig:
  CONFIG_SF_DEFAULT_BUS
  CONFIG_SF_DEFAULT_CS
  CONFIG_SF_DEFAULT_MODE
  CONFIG_SF_DEFAULT_SPEED

I use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>