u-boot.git/include/configs/trimslice.h, branch u-boot-2016.09.y

configs: Migrate CONFIG_USB_STORAGE

2016-09-09T18:59:35+00:00

In some cases we were missing CONFIG_USB=y so enable that when needed.

Reviewed-by: Masahiro Yamada 
Signed-off-by: Tom Rini

ARM: tegra: fix trimslice environment location

2016-08-15T17:26:14+00:00

Trimslice currently stores its environment at 512KiB into the SPI flash
chip. The U-Boot binary has grown such that the size of the boot image
(which includes the Tegra BCT, padding, and the U-Boot binary) is slightly
larger than 512K now. Consequently, writing the boot image to flash
corrupts the saved environment, and equally, writing to or erasing the
environment will corrupt the bootloader, which in turn will cause the
Tegra boot ROM to enter recovery mode during boot, making it look as if
the system is non-operational. Note that tegra-uboot-flasher writes to
the environment during the flashing process.

Solve this by moving the environment as high as possible in flash. This
will allow the U-Boot binary to roughly double in size before this problem
is hit again, at which point there's nothing we can do anyway since the
binary won't fit into flash.

99% of other Tegra boards store the environment in eMMC and use a negative
value for CONFIG_ENV_OFFSET, which already automatically places the
environment as near the end of boot flash as possible. The 1 remaining
board hard-codes CONFIG_ENV_OFFSET to 2MiB, which allows for plenty more
bloat.

Reported-by: Stephen L Arnold 
Signed-off-by: Stephen Warren 
Reviewed-by: Simon Glass 
Signed-off-by: Tom Warren

configs: Re-sync with cmd/Kconfig

2016-04-25T19:09:47+00:00

Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini

configs: Re-sync almost all of cmd/Kconfig

2016-04-25T19:09:40+00:00

This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini

net: Move CONFIG_RTL8169 to Kconfig

2016-03-22T16:19:53+00:00

Introduce CONFIG_RTL8169 in Kconfig and move over boards' defconfig
to use that.

Signed-off-by: Bin Meng 
Acked-by: Stephen Warren 
Acked-by: Joe Hershberger

ARM: tegra: don't set CONFIG_USB_MAX_CONTROLLER_COUNT

2016-02-18T17:02:19+00:00

This option is no longer used now that DM_USB is enabled.

Fixes: 534f9d3feffd ("dm: tegra: usb: Move USB to driver model")
Signed-off-by: Stephen Warren 
Signed-off-by: Tom Warren

dm: pci: Avoid a driver model build error with CONFIG_CMD_PCI_ENUM

2015-12-01T13:26:36+00:00

This is not supported with driver model, so print a message instead of
generating a build error. Rescanning PCI is not yet implemented.

This function will be implemented later once some additional PCI driver
model improvements are merged. It was confirmed on the mailing list
that no one on the tegra side will miss this feature, so it is disabled
for tegra.

Signed-off-by: Simon Glass 
Tested-by: Stephen Warren

dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig

2015-12-01T13:26:36+00:00

Move this option to Kconfig and fix up all users.

Signed-off-by: Simon Glass 
Tested-by: Stephen Warren

sf: Move SPI flash drivers to defconfig

2015-11-25T15:06:05+00:00

There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.

Signed-off-by: Bin Meng

spi: Move SPI drivers to defconfig

2015-11-25T15:05:28+00:00

There are already Kconfig options for SPI drivers, but we
have not moved them from config.h to defconfig files. This
commit does this in a batch.

Signed-off-by: Bin Meng