u-boot.git/include/configs/trimslice.h, branch v2020.01

env: Finish migration of common ENV options

2019-11-20T23:32:09+00:00

- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk 
Cc: Joe Hershberger 
Cc: Patrick Delaunay 
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini 
Acked-by: Joe Hershberger 
Reviewed-by: Simon Goldschmidt

Convert CONFIG_ENV_SPI_* to Kconfig

2019-03-25T21:36:59+00:00

This converts the following to Kconfig:
  CONFIG_ENV_SPI_BUS
  CONFIG_ENV_SPI_CS
  CONFIG_ENV_SPI_MAX_HZ
  CONFIG_ENV_SPI_MODE

Most of time these value are not needed, CONFIG_SF_DEFAULT
with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
to force the associated value for the environment.

Signed-off-by: Patrick Delaunay

Convert CONFIG_SF_DEFAULT_* to Kconfig

2019-03-25T21:36:53+00:00

This converts the following to Kconfig:
  CONFIG_SF_DEFAULT_BUS
  CONFIG_SF_DEFAULT_CS
  CONFIG_SF_DEFAULT_MODE
  CONFIG_SF_DEFAULT_SPEED

I use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.

Signed-off-by: Patrick Delaunay

Kconfig: tegra: Migrate USB_EHCI_TEGRA

2019-02-20T16:01:44+00:00

Migrate USB_EHCI_TEGRA from headers to Kconfig

Signed-off-by: Peter Robinson 
Cc: Tom Warren 
Cc: Stephen Warren 
Cc: Marek Vasut 
Cc: Marcel Ziswiler 
Cc: Peter.Chubb@data61.csiro.au
Cc: Lucas Stach 
Cc: Stefan Agner 
Cc: Alban Bedel 
Cc: Allen Martin 
Signed-off-by: Tom Warren

Kconfig: tegra: Migrate SYS_I2C_TEGRA

2019-02-20T16:01:44+00:00

Migrate SYS_I2C_TEGRA from headers to Kconfig

Signed-off-by: Peter Robinson 
Cc: Tom Warren 
Cc: Stephen Warren 
Cc: Heiko Schocher 
Cc: Marcel Ziswiler 
Cc: Peter.Chubb@data61.csiro.au
Cc: Lucas Stach 
Cc: Stefan Agner 
Cc: Alban Bedel 
Cc: Allen Martin 
Signed-off-by: Tom Warren

tegra: cleanup dangling comments in include/configs

2019-02-20T16:01:43+00:00

There's a number of dangling comments in various tegra configs post migrations
of various configs so lets clean them up.

Signed-off-by: Peter Robinson 
Cc: Tom Warren 
Cc: Stephen Warren 
Cc: Marcel Ziswiler 
Cc: Tom Warren 
Cc: Stephen Warren 
Cc: Peter.Chubb@data61.csiro.au
Cc: Lucas Stach 
Cc: Stefan Agner 
Cc: Alban Bedel 
Cc: Allen Martin 
Reviewed-by: Marcel Ziswiler 
Signed-off-by: Tom Warren

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

usb: net: migrate USB Ethernet adapters to Kconfig

2017-09-08T14:23:00+00:00

This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
Update defconfigs.

Signed-off-by: Chris Packham 
Reviewed-by: Simon Glass

usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig

2017-09-08T14:21:46+00:00

CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
LAN78XX options under new menu. Finally update the defconfigs that need
CONFIG_USB_HOST_ETHER.

Signed-off-by: Chris Packham 
Reviewed-by: Simon Glass

Convert CONFIG_CMD_PCI to Kconfig

2017-08-11T19:41:50+00:00

This converts the following to Kconfig:
   CONFIG_CMD_PCI

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng 
Reviewed-by: Philipp Tomsich