u-boot.git/include/configs, branch main

fix non-existing sysam.it domain

2026-08-28T18:18:11Z

Change "Angelo Dureghello" emails replacing non-existing domain with the currently working one. Signed-off-by: Angelo Dureghello Acked-by: Michal Simek

arm64: renesas: r8a779g3: Switch to distro boot command on Retronix R-Car V4H Sparrow Hawk

2026-08-20T18:15:23Z

Switch Retronix R-Car V4H Sparrow Hawk to distro boot command to obtain generic distro boot capability. The boot scripts now search each of the SD, NVMe, USB boot devices for either a fitImage with embedded script, regular boot script, or extlinux.conf, and boot the first one found. This allows for standardized boot of the device, similar to other such devices. There are slight customizations to the distro boot commands, specifically the PCIe controller is started before USB controller, because the USB controller is attached to the PCIe controller. Furthermore, USB ethernet boot is not enabled. Signed-off-by: Marek Vasut

arm64: renesas: r8a779g3: Add bootloader update environment on Retronix R-Car V4H Sparrow Hawk

2026-08-20T18:15:23Z

Add bootloader update environment to Retronix R-Car V4H Sparrow Hawk. The "update_loader_from_{mmc,nvme,usb}" script updates U-Boot "flash.bin" in SPI NOR at offset 0x0 from SD card, NVMe SSD and USB mass storage device respectively. Each script sets up parameters for the generic update script "update_loader_from_blk", which can be used to update the "flash.bin" from any block device. The parameters are these: - renesas_update_loader_iface ....... Update block device (mmc, nvme, usb, ...) - renesas_update_loader_dev ......... Update block device number (0, 1, ...) - renesas_update_loader_part ........ Update block device partition (1, 2, ...) - renesas_update_loader_filename .... Update file name (flash.bin) - renesas_update_loader_sf_offset ... SPI NOR target offset (0x0) Signed-off-by: Marek Vasut

arm64: renesas: r8a779g3: Add PCIe firmware environment on Retronix R-Car V4H Sparrow Hawk

2026-08-20T18:15:23Z

Add PCIe controller firmware handling environment to Retronix R-Car V4H Sparrow Hawk. The "renesas_rcar_gen4_load_firmware" script is used to load PCIe controller firmware from SPI NOR offset 0x300000. The "flash_pcie_fw_to_qspi_from_mmc" script is used to write the firmware from SD card to SPI NOR offset 0x300000 . Signed-off-by: Marek Vasut

arm64: versal2: Select GIC redistributor base at runtime

2026-08-12T04:54:37Z

The GIC redistributor base address depends on the part: the 2VM3654 device has 4 APU cores and 3 GIC ITS blocks, which shifts the redistributor region up compared to the base 8 core / single ITS part. A single U-Boot binary must therefore pick the right base at runtime instead of relying on the compile-time GICR_BASE used by the generic lowlevel_init(). Add a SoC specific lowlevel_init() that reads the PMC TAP IDCODE and selects GICR_BASE_2VM3654 for the 2VM3654 device, otherwise keeps the default GICR_BASE. CONFIG_ARMV8_MULTIENTRY is not supported on Versal Gen 2 so the generic slave handling is intentionally dropped. Signed-off-by: Michal Simek Link: https://patch.msgid.link/4c0dc2b6e29d300db15be0844879ab4d028d98a9.1783493630.git.michal.simek@amd.com

Merge branch 'main' of https://git.u-boot-project.org/u-boot/custodians/u-boot-sh

2026-08-08T18:18:40Z

This includes temporary U-Boot DT ECC carveouts for R-Car Gen5, they will be dropped from U-Boot DTs once OF_UPSTREAM DTs get re-synced. This also includes RPC-IF support for R-Car Gen5 and env storage in RPC HF. This also includes an update for R-Car Gen5 UFS controller driver.

arm: renesas: Enable RPC on R-Car R8A78000 X5H Cortex-M33 RSIP port

2026-08-07T19:59:00Z

Enable RPC and HyperFlash support on R-Car R8A78000 X5H Cortex-M33 RSIP. RPC is used both to update the HF content, which includes the U-Boot on RSIP itself and SCP firmware, as well as access the U-Boot environment for U-Boot on RSIP. Signed-off-by: Marek Vasut

Merge tag 'u-boot-imx-main-20260807' of https://git.u-boot-project.org/u-boot/custodians/u-boot-imx

2026-08-07T16:21:33Z

CI: https://git.u-boot-project.org/u-boot/custodians/u-boot-imx/-/pipelines/906 - Fix a boot regression on i.MX7 related to the system counter. - Add Aquila iMX95 0243 PID4. - Update phycore_imx8mm DDR timings. - Add FRDM-IMX95 initial support. - Handle FCFB header during SPI NOR boot and CST backend selection.

imx: Add FRDM-IMX95 initial support

2026-08-06T11:50:59Z

Add boot support and peripherals like eMMC/SD, UART, I2C, GPIO, ENETC0/1 and PCIE0/1 for iMX95 15x15 FRDM. Updated doc for build instructions. Signed-off-by: Lei Xu Signed-off-by: Joseph Guo

board: sophgo: add support for Milk-V Duo 256M

2026-08-05T18:13:19Z

Add U-Boot support for Milk-V Duo 256M. This board has a different SoC compared to the Milk-V Duo 64M, it uses the Sophgo SG2002 instead of the Sophgo CV1800B. Both SoCs share many common IP blocks, so this board reuses the existing cv1800b CPU support. The board shares the same 'board.c' with Milk-V Duo 64MB (CV1800B), so use the same file for now. Link: https://milkv.io/docs/duo/getting-started/duo256m Signed-off-by: Hiago De Franco Acked-by: Leo Yu-Chi Liang