u-boot.git/include/configs, branch v2009.06-rc3 Unnamed repository; edit this file 'description' to name the repository. rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared 2009-06-09T22:15:11+00:00 Wolfgang Denk wd@denx.de 2009-06-09T22:15:11+00:00 3a76ab5c166d5956885f803ce975e7151cc0ca0e Signed-off-by: Wolfgang Denk <wd@denx.de> 
Signed-off-by: Wolfgang Denk <wd@denx.de>
TQM85xx: minor config file cleanup 2009-06-09T21:05:44+00:00 Wolfgang Denk wd@denx.de 2009-05-14T22:16:02+00:00 7a2063bd80d3b58b2dd5d5e58f4411f8d250576c Remove "saveenv" from "update" definition: the environment is outside the U-Boot image on TQM85xx and therefor not affected by updates. Also "beautify" code a bit (vertical alignment). Signed-off-by: Wolfgang Denk <wd@denx.de> 
Remove "saveenv" from "update" definition: the environment is outside
the U-Boot image on TQM85xx and therefor not affected by updates.

Also "beautify" code a bit (vertical alignment).

Signed-off-by: Wolfgang Denk <wd@denx.de>
TQM85xx: adapt for new flash types 2009-06-09T21:04:42+00:00 Wolfgang Denk wd@denx.de 2009-05-14T22:16:01+00:00 c0296b1801fc9426d772fa75fe58458db605dfee Old TQM85xx boards had 'M' type Spansion Flashes from the S29GLxxxM series while new boards have 'N' type Flashes from the S29GLxxxN series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB. We now change the configuration to the new flash types for all boards; this also works on old boards - we just waste two flash sectors for the environment which could be smaller there. Signed-off-by: Wolfgang Denk <wd@denx.de> 
Old TQM85xx boards had 'M' type Spansion Flashes from the S29GLxxxM
series while new boards have 'N' type Flashes from the S29GLxxxN
series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB.

We now change the configuration to the new flash types for all
boards; this also works on old boards - we just waste two flash
sectors for the environment which could be smaller there.

Signed-off-by: Wolfgang Denk <wd@denx.de>
85xx: Fix the wrong SYS_CLK_IN for 8569MDS 2009-06-09T20:58:39+00:00 Dave Liu daveliu@freescale.com 2009-05-18T09:49:23+00:00 6735104924f06340071a6914a9ee3345607fc102 The SYS_CLK_IN of MPC8569MDS is 66.66MHz, The DDR_CLK_IN is same with SYS_CLK_IN in 8569 processor. so, change the SYS_CLK_IN from 66MHz to 66.66MHz. Signed-off-by: Dave Liu <daveliu@freescale.com> 
The SYS_CLK_IN of MPC8569MDS is 66.66MHz,
The DDR_CLK_IN is same with SYS_CLK_IN in 8569 processor.
so, change the SYS_CLK_IN from 66MHz to 66.66MHz.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Add config option for disabling DM9000-SROM support. 2009-06-09T05:57:21+00:00 Remy Bohmer linux@bohmer.net 2009-05-03T10:11:40+00:00 e5a3bc2401a23f1890611f020f57f94824a534db Some boards do not have SROM support for the DM9000 network adapter. Instead of listing these board names in the driver code, make this option configurable from the board config file. It also removes a build warning for the at91sam9261ek board: 'dm9000x.c:545: warning: 'read_srom_word' defined but not used' And it repaires the trizepsiv board build which was broken around the same routines Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Some boards do not have SROM support for the DM9000 network adapter.
Instead of listing these board names in the driver code, make this
option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the
same routines

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Blackfin: bf518f-ezbrd: setup portmux for async flash 2009-05-26T02:38:42+00:00 Graf Yang graf.yang@analog.com 2009-05-24T06:34:34+00:00 ab687907980fa28940a1a992d3f1c5d17cdbbf5d The pins for async memory where parallel flash lives are not enabled by default, so make sure we mux them as needed. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 
The pins for async memory where parallel flash lives are not enabled by
default, so make sure we mux them as needed.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
TQM834x: remove defines causing gcc4.4 warnings 2009-05-20T20:36:26+00:00 Kim Phillips kim.phillips@freescale.com 2009-05-19T17:53:32+00:00 9fd9abedcc3c10cf89353265cbe05f58609d51f3 Configuring for TQM834x board... cpu_init.c: In function 'cpu_init_f': cpu_init.c:262: warning: array subscript is above array bounds cpu_init.c:263: warning: array subscript is above array bounds cpu_init.c:270: warning: array subscript is above array bounds ... Signed-off-by: Kim Phillips <kim.phillips@freescale.com> 
Configuring for TQM834x board...
cpu_init.c: In function 'cpu_init_f':
cpu_init.c:262: warning: array subscript is above array bounds
cpu_init.c:263: warning: array subscript is above array bounds
cpu_init.c:270: warning: array subscript is above array bounds
...

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Fix e-mail address of Gary Jennejohn. 2009-05-15T20:11:59+00:00 Detlev Zundel dzu@denx.de 2009-05-13T08:54:10+00:00 792a09eb9d5d8c4f74b7e9f2e887316d511a4e80 Signed-off-by: Detlev Zundel <dzu@denx.de> 
Signed-off-by: Detlev Zundel <dzu@denx.de>
Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN 2009-05-15T19:43:05+00:00 Rohit Hagargundgi h.rohit@samsung.com 2009-03-09T14:15:46+00:00 12a6753155716e5c3c181a8f40e8b2d3d669aefd Add CONFIG_SYS_MONITOR_LEN macro to apollon board config. CONFIG_SYS_MONITOR_LEN defines the U-Boot image size. and is used by OneNAND ipl when reading U-Boot image. Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> 
Add CONFIG_SYS_MONITOR_LEN macro to apollon board config.
CONFIG_SYS_MONITOR_LEN defines the U-Boot image size.
and is used by OneNAND ipl when reading U-Boot image.

Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
powerpc/inka4x0: Remove left-over ide reset code. 2009-05-15T19:31:24+00:00 Detlev Zundel dzu@denx.de 2009-05-05T14:04:06+00:00 60bbcf0cc6e55095dd186e59a557d584b9b56eb1 The pin which was used in preliminary versions of the board for ide reset is really connected to the rtc clock. Signed-off-by: Detlev Zundel <dzu@denx.de> 
The pin which was used in preliminary versions of the board for ide
reset is really connected to the rtc clock.

Signed-off-by: Detlev Zundel <dzu@denx.de>