u-boot.git/include/configs, branch v2009.08-rc1 Unnamed repository; edit this file 'description' to name the repository. at91cap9adk: fix #ifdef/#endif pairing (2nd try) 2009-07-27T08:01:11+00:00 Wolfgang Denk wd@denx.de 2009-07-27T08:01:11+00:00 c9ed38cb6de50fdb4aaa60b668c555002903b211 Commit 7024aa14 was supposed to fix the #ifdef/#endif pairing in include/configs/at91cap9adk.h, but did not cate all problems. Signed-off-by: Wolfgang Denk <wd@denx.de> 
Commit 7024aa14 was supposed to fix the #ifdef/#endif pairing in
include/configs/at91cap9adk.h, but did not cate all problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Merge branch 'master' of git://git.denx.de/u-boot-video 2009-07-26T21:15:57+00:00 Wolfgang Denk wd@denx.de 2009-07-26T21:15:57+00:00 8bf7437c0127f417b566c93ffa59df7292a0e11f 






update the EB+MCF-EV123 board support
2009-07-26T11:19:23+00:00

Jens Scharsig
esw@bus-elektronik.de

2009-07-24T08:31:48+00:00

35cf3b57eafe3ee1f693e24267e0ecfefab60251

This patch updates the support for EB+MCF-EV123 board and needs
the [PATCH 1/2 V3] new video driver for bus vcxk framebuffers

* remove the board framebuffer driver
* use the common bus_vcxk framebuffer driver
* adds bmp support
* adds splashimage support
* fix serveral cosmetical errors

Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
[agust@denx.de: fixed some style issues before applying]
Signed-off-by: Anatolij Gustschin <agust@denx.de>





This patch updates the support for EB+MCF-EV123 board and needs
the [PATCH 1/2 V3] new video driver for bus vcxk framebuffers

* remove the board framebuffer driver
* use the common bus_vcxk framebuffer driver
* adds bmp support
* adds splashimage support
* fix serveral cosmetical errors

Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
[agust@denx.de: fixed some style issues before applying]
Signed-off-by: Anatolij Gustschin <agust@denx.de>







Add LCD support to MIMC200 board
2009-07-26T11:14:33+00:00

Mark Jackson
mpfj-list@mimc.co.uk

2009-07-21T10:35:22+00:00

f68378d60a905d43155f2e89bf81999d3c93a90a

This patch updates the MIMC200 files to enable the LCD.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>





This patch updates the MIMC200 files to enable the LCD.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>







ppc4xx: Add chip_config command to AMCC Kilauea eval board
2009-07-24T07:56:40+00:00

Stefan Roese
sr@denx.de

2009-07-21T12:06:29+00:00

4b1389e0ceb19e9b50b96fd3908483a6c2274fb0

This patch removes the "alterpll" command and replaces it with the now
ppc4xx standard "chip_config" command to configure the I2C bootstrap
EEPROM.

Signed-off-by: Stefan Roese <sr@denx.de>





This patch removes the "alterpll" command and replaces it with the now
ppc4xx standard "chip_config" command to configure the I2C bootstrap
EEPROM.

Signed-off-by: Stefan Roese <sr@denx.de>







ppc4xx: Fix EEPROM configuration on Kilauea
2009-07-24T07:56:18+00:00

Stefan Roese
sr@denx.de

2009-07-21T12:33:52+00:00

f6af8ce0c80327cb6aaa347642026ad838335c23

Kilauea has an AT24C02 EEPROM which has an 8 byte page. Without defining
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS to 3 the "eeprom" command doesn't
work correctly.

Additionally the page write delay (CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
is set to a more defensive value of 10ms.

Signed-off-by: Stefan Roese <sr@denx.de>





Kilauea has an AT24C02 EEPROM which has an 8 byte page. Without defining
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS to 3 the "eeprom" command doesn't
work correctly.

Additionally the page write delay (CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
is set to a more defensive value of 10ms.

Signed-off-by: Stefan Roese <sr@denx.de>







ppc4xx: Add 405EP based PMC405DE board
2009-07-24T04:47:40+00:00

Matthias Fuchs
matthias.fuchs@esd.eu

2009-07-22T11:56:21+00:00

99d8b23bc7e2be04fcbf49c5cec9f5ae76df290c

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>





Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>







Add "chip_config" command for PPC4xx bootstrap configuration
2009-07-24T04:42:32+00:00

Stefan Roese
sr@denx.de

2009-07-20T04:57:27+00:00

87c0b72908e05662b8b415e26e1042f4779629da

This patch adds a generic command for programming I2C bootstrap
eeproms on PPC4xx. An implementation for Canyonlands board is
included.

The command name is intentionally chosen not to be PPC4xx specific.
This way other CPU's/SoC's can implement a similar command under
the same name, perhaps with a different syntax.

Usage on Canyonlands:

=> chip_config
Available configurations (I2C address 0x52):
600-nor          - NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100
600-nand         - NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100
800-nor          - NOR  CPU: 800 PLB: 200 OPB: 100 EBC: 100
800-nand         - NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100
1000-nor         - NOR  CPU:1000 PLB: 200 OPB: 100 EBC: 100
1000-nand        - NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100
1066-nor         - NOR  CPU:1066 PLB: 266 OPB:  88 EBC:  88 ***
1066-nand        - NAND CPU:1066 PLB: 266 OPB:  88 EBC:  88
=> chip_config 600-nor
Using configuration:
600-nor          - NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100
done (dump via 'i2c md 52 0.1 10')
Reset the board for the changes to take effect

Other 4xx boards will be migrated to use this command soon
as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>





This patch adds a generic command for programming I2C bootstrap
eeproms on PPC4xx. An implementation for Canyonlands board is
included.

The command name is intentionally chosen not to be PPC4xx specific.
This way other CPU's/SoC's can implement a similar command under
the same name, perhaps with a different syntax.

Usage on Canyonlands:

=> chip_config
Available configurations (I2C address 0x52):
600-nor          - NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100
600-nand         - NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100
800-nor          - NOR  CPU: 800 PLB: 200 OPB: 100 EBC: 100
800-nand         - NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100
1000-nor         - NOR  CPU:1000 PLB: 200 OPB: 100 EBC: 100
1000-nand        - NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100
1066-nor         - NOR  CPU:1066 PLB: 266 OPB:  88 EBC:  88 ***
1066-nand        - NAND CPU:1066 PLB: 266 OPB:  88 EBC:  88
=> chip_config 600-nor
Using configuration:
600-nor          - NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100
done (dump via 'i2c md 52 0.1 10')
Reset the board for the changes to take effect

Other 4xx boards will be migrated to use this command soon
as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>







xpedite1k: Move to X-ES vendor directory
2009-07-24T04:42:32+00:00

Peter Tyser
ptyser@xes-inc.com

2009-07-18T00:01:16+00:00

10c1b218556ed9871f36bc0c407f4f2f6196353b

The XPedite1000 is an X-ES product thus it can be put in board/xes along
with other X-ES boards.  Along with the move, the board was renamed to
XPedite1000 from XPedite1K to fit X-ES's standard naming convention.
Maintainership was also transfered to Peter Tyser.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>





The XPedite1000 is an X-ES product thus it can be put in board/xes along
with other X-ES boards.  Along with the move, the board was renamed to
XPedite1000 from XPedite1K to fit X-ES's standard naming convention.
Maintainership was also transfered to Peter Tyser.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>







xpedite1k: Sync checkboard() with other X-ES boards
2009-07-24T04:42:32+00:00

Peter Tyser
ptyser@xes-inc.com

2009-07-18T00:01:15+00:00

54381b79d268e1bead5d78ed8423df31a3cb0e2c

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>





Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>