u-boot.git/include/configs, branch v2012.07 Unnamed repository; edit this file 'description' to name the repository. hawkboard: Fix SPL Nand driver misconfiguration 2012-07-30T18:22:42+00:00 Linu Cherian linucherian@gmail.com 2012-07-26T22:21:53+00:00 9f0a371d2c477fc1eef7ea1c40ddf6c597676844 Hawkboard was using the wrong nand_read_page version for SPL image. As a side effect, the u-boot image loaded by the SPL from nand was getting corrupted. Enable CONFIG_SYS_NAND_HW_ECC_OOBFIRST to select the correct nand_read_page algorithm for SPL. Signed-off-by: Linu Cherian <linucherian@gmail.com> Acked-by: Sughosh Ganu <urwithsughosh@gmail.com> Acked-by: Tom Rini <trini@ti.com> 
Hawkboard was using the wrong nand_read_page version for SPL image.
As a side effect, the u-boot image loaded by the SPL from nand
was getting corrupted.

Enable CONFIG_SYS_NAND_HW_ECC_OOBFIRST to select the correct nand_read_page
algorithm for SPL.

Signed-off-by: Linu Cherian <linucherian@gmail.com>
Acked-by: Sughosh Ganu <urwithsughosh@gmail.com>
Acked-by: Tom Rini <trini@ti.com>
Blackfin: easylogo: add lzma logos 2012-02-04T01:44:54+00:00 Mike Frysinger vapier@gentoo.org 2012-02-04T01:44:54+00:00 42c6e9ad1b4bf5a8d071460a614c4d24e6877369 The bf527-ezkit boards are getting too big to fit into their reserved flash space, so we need to use a lzma compressed logo. Since the video driver code is very similar, add lzma compressed support to all of the Blackfin video drivers. Signed-off-by: Mike Frysinger <vapier@gentoo.org> 
The bf527-ezkit boards are getting too big to fit into their reserved
flash space, so we need to use a lzma compressed logo.

Since the video driver code is very similar, add lzma compressed support
to all of the Blackfin video drivers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Merge branch 'next' of git://git.denx.de/u-boot-video 2012-07-18T08:47:03+00:00 Wolfgang Denk wd@denx.de 2012-07-18T08:47:03+00:00 66714b1a6df0a5a9f1656a6d4e6eea3c7ecdf7ae * 'next' of git://git.denx.de/u-boot-video: ipu_common: Add ldb_clk for use in parenting the pixel clock ipu_common: Do not hardcode the ipu_clk frequency ipu_common: Rename MXC_CCM_BASE ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53 ipu_common: Only apply the erratum to MX51 video: Rename CONFIG_VIDEO_MX5 mx6: Allow mx6 to access the IPUv3 registers common lcd: minor coding style changes Signed-off-by: Wolfgang Denk <wd@denx.de> 
* 'next' of git://git.denx.de/u-boot-video:
  ipu_common: Add ldb_clk for use in parenting the pixel clock
  ipu_common: Do not hardcode the ipu_clk frequency
  ipu_common: Rename MXC_CCM_BASE
  ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53
  ipu_common: Only apply the erratum to MX51
  video: Rename CONFIG_VIDEO_MX5
  mx6: Allow mx6 to access the IPUv3 registers
  common lcd: minor coding style changes

Signed-off-by: Wolfgang Denk <wd@denx.de>
nios2: move gd and bd into BSS 2012-07-16T01:51:12+00:00 Thomas Chou thomas@wytron.com.tw 2012-04-23T02:55:02+00:00 7dfb0602915447d10d89096634be7e9d15925eb3 As suggested by Graeme Russ, move gd and bd data structrures to BSS instead of calculating the locations around the stack and heap. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Mike Frysinger <vapier@gentoo.org> 
As suggested by Graeme Russ, move gd and bd data structrures
to BSS instead of calculating the locations around the stack
and heap.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Mike Frysinger <vapier@gentoo.org>
mx28evk: Add I2C support 2012-07-11T08:54:53+00:00 Fabio Estevam fabio.estevam@freescale.com 2012-05-07T05:42:34+00:00 175a7d2778ad26a244f5c846a6385413c87d95a7 Add I2C support. Tested by placing a 24LC16 EEPROM into the U50 slot which comes empty from factory. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> 
Add I2C support.

Tested by placing a 24LC16 EEPROM into the U50 slot which comes empty from factory.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
mx6qsabrelite: add i2c support 2012-07-11T08:54:52+00:00 Troy Kisky troy.kisky@boundarydevices.com 2012-04-24T17:33:26+00:00 3174689be239aae5901fbc5c484a15444bbe96ea Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de> 
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
mxc_i2c: specify i2c base address in config file 2012-07-11T08:54:29+00:00 Troy Kisky troy.kisky@boundarydevices.com 2012-04-24T17:33:25+00:00 de6f604de245b19ce2e330bc63b6522af134d7ae The following platforms had their config files changed flea3, imx31_phycore, mx35pdk, mx53ard, mx53evk, mx53smd and mx53loco. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de> 
The following platforms had their config files changed
flea3, imx31_phycore, mx35pdk, mx53ard, mx53evk, mx53smd
and mx53loco.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
ipu_common: Do not hardcode the ipu_clk frequency 2012-07-10T09:35:39+00:00 Fabio Estevam fabio.estevam@freescale.com 2012-05-31T07:24:00+00:00 9fbdb1aac5583197270c5d1a7634b7f93b34a654 Do not hardcode the ipu_clk frequency and let the board file pass this value. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
Do not hardcode the ipu_clk frequency and let the board file pass this value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
video: Rename CONFIG_VIDEO_MX5 2012-07-10T09:35:38+00:00 Fabio Estevam fabio.estevam@freescale.com 2012-05-31T07:23:56+00:00 695af9abc660c674966f02b0ecc85f5524a7aede Rename CONFIG_VIDEO_MX5 as this driver can also be used on mx6. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
Rename CONFIG_VIDEO_MX5 as this driver can also be used on mx6.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-07-10T06:54:41+00:00 Wolfgang Denk wd@denx.de 2012-07-10T06:54:41+00:00 895f3e0542015b347298c8b501e63d5f32002c04 * 'master' of git://git.denx.de/u-boot-arm: tegra: define fdt_load/fdt_high variables tegra: enable bootz command tegra: usb: Fix device enumeration problem of USB1 tegra: trimslice: set up serial flash pinmux tegra: add pin_mux_spi() board initialization function tegra: add GMC/GMD funcmux entry for SFLASH tegra: bootcmd: start USB only when needed tegra: bootcmd enhancements tegra: add enterrcm command tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG Add env vars describing U-Boot target board tegra: usb: fix wrong error check tegra: add ULPI on USB2 funcmux entry tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches tegra: Add Tamonten Evaluation Carrier support tegra: Use SD write-protect GPIO on Tamonten tegra: Implement gpio_early_init() on Tamonten tegra: Allow boards to perform early GPIO setup tegra: plutux: Add device tree support tegra: medcom: Add device tree support tegra: Rework Tamonten support beagle: add eeprom expansion board info for bct brettl4 Signed-off-by: Wolfgang Denk <wd@denx.de> 
* 'master' of git://git.denx.de/u-boot-arm:
  tegra: define fdt_load/fdt_high variables
  tegra: enable bootz command
  tegra: usb: Fix device enumeration problem of USB1
  tegra: trimslice: set up serial flash pinmux
  tegra: add pin_mux_spi() board initialization function
  tegra: add GMC/GMD funcmux entry for SFLASH
  tegra: bootcmd: start USB only when needed
  tegra: bootcmd enhancements
  tegra: add enterrcm command
  tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG
  Add env vars describing U-Boot target board
  tegra: usb: fix wrong error check
  tegra: add ULPI on USB2 funcmux entry
  tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches
  tegra: Add Tamonten Evaluation Carrier support
  tegra: Use SD write-protect GPIO on Tamonten
  tegra: Implement gpio_early_init() on Tamonten
  tegra: Allow boards to perform early GPIO setup
  tegra: plutux: Add device tree support
  tegra: medcom: Add device tree support
  tegra: Rework Tamonten support
  beagle: add eeprom expansion board info for bct brettl4

Signed-off-by: Wolfgang Denk <wd@denx.de>