u-boot.git/include/configs, branch v2013.10-rc4

Merge branch 'master' of git://git.denx.de/u-boot-arm

2013-10-02T15:45:22Z

Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

2013-10-02T12:53:27Z

Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

2013-10-02T06:10:36Z

am335x_evm: enable DFU RAM

2013-09-24T15:51:35Z

Enable DFU for RAM, provide example dfu_alt_info Signed-off-by: Afzal Mohammed Cc: Heiko Schocher Cc: Tom Rini Cc: Marek Vasut Cc: Lukasz Majewski Cc: Pantelis Antoniou Reviewed-by: Lukasz Majewski

ARM: atmel: add RNDIS gadget support

2013-09-24T15:51:35Z

Add RNDIS gadget support to test atmel usba udc driver Signed-off-by: Bo Shen

am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot.

2013-09-20T20:57:40Z

If, in CONFIG_BOOTCOMMAND, the environment switches both the mmcdev and bootpart variables to refer to MMC device 1, it would make sense that the mmcroot env variable should switch to that device as well. Signed-off-by: Robert P. J. Day

ARM: DRA7: Enable saveenv command

2013-09-20T20:57:40Z

dra7xx_evm has eMMC and the default environment can be stored in it. So enabling saveenv command and the configs to store environment in eMMC. Tested on DRA752 ES1.0 Signed-off-by: Lokesh Vutla

am335x:Handle worst case scenario for Errata 1.0.24

2013-09-20T20:57:40Z

In Errata 1.0.24, if the board is running at OPP50 and has a warm reset, the boot ROM sets the frequencies for OPP100. This patch attempts to drop the frequencies back to OPP50 as soon as possible in the SPL. Then later the voltages and frequencies up set higher. Cc: Enric Balletbo i Serra Cc: Lars Poeschel Signed-off-by: Steve Kipisz [trini: Adapt to current framework] Signed-off-by: Tom Rini

am335x_evm: am33xx_spl_board_init function and scale core frequency

2013-09-20T20:57:35Z

Add a am33xx_spl_board_init (and enable the PMICs) that we may see, depending on the board we are running on. In all cases, we see if we can rely on the efuse_sma register to tell us the maximum speed. In the case of Beaglebone White, we need to make sure we are on AC power, and are on later than rev A1, and then we can ramp up to the PG1.0 maximum of 720Mhz. In the case of Beaglebone Black, we are either on PG2.0 that supports 1GHz or PG2.1. As PG2.0 may or may not have efuse_sma set, we cannot rely on this probe. In the case of the GP EVM, EVM SK and IDK we need to rely on the efuse_sma if we are on PG2.1, and the defaults for PG1.0/2.0. Signed-off-by: Tom Rini

mx6sabresd: Fix the fdt file for the mx6dl version

2013-09-20T15:55:37Z

We need to load 'imx6dl-sabresd.dtb' in the mx6dl version. Signed-off-by: Fabio Estevam Acked-by: Otavio Salvador