u-boot.git/include/configs, branch v2016.03

exynos5: common: Enable CONFIG_USB_ETHER_RTL8152 ethernet support

2016-03-11T01:59:51+00:00

Enable CONFIG_USB_ETHER_RTL8152 support for Odroid XU4 which
has support for RTL8153-CG gigabit Ethernet adapter,
connected over USB 3.0.

commit 9dc8ba19c50fc0b1623c654bcfe6caa903a4c36c added support
for Realtek 8152/8153 driver.

Signed-off-by: Anand Moon 
Signed-off-by: Minkyu Kang

OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support

2016-03-08T20:00:40+00:00

- Add required UBI/UBIFS config definitions
- Add reasonable MTD partition layout
- Remove JFFS2 config definitions
- Drop some CFI verbage and definitions
- Make comment 'one-liners' truly one line
- Improve readability and content arrangement

Signed-off-by: Derald D. Woods 
Reviewed-by: Tom Rini

OMAP3: am3517_evm: Use BCH8 ECC for NAND

2016-03-08T20:00:39+00:00

Select 8-bit BCH ecc-scheme with s/w based error correction
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW

Signed-off-by: Derald D. Woods 
Reviewed-by: Tom Rini

mx53ard: Move to booting zImage

2016-03-02T13:49:38+00:00

Move to booting a zImage kernel by default to align with the other
i.MX boards.

While at it, adjust the fdt_addr so that we can boot a standard
mainline kernel.

Signed-off-by: Fabio Estevam

arm: dra7xx: Define Android partition table

2016-02-29T19:49:37+00:00

"fastboot oem format" command reuses "gpt write" command, which in turn
requires correct partitions defined in $partitions variable. This patch
adds such definition of Android partitions for DRA7XX EVM board.

By default $partitions variable contains Linux partition table. In order
to prepare Android environment one can run next commands from U-Boot
shell:

    => env set partitions $partitions_android
    => env save

After those operations one can go to fastboot mode and perform
"fastboot oem format" to create Android partition table.

While at it, enable CONFIG_RANDOM_UUID to spare user from providing
UUIDs for each partition manually.

Signed-off-by: Sam Protsenko 
Reviewed-by: Tom Rini

sniper: Various minor cleanups, missing Kconfig configs and reorganisation

2016-02-29T19:49:37+00:00

This introduces some minor cleanups, regarding aspects such as board name, code
and headers organization as well as deprecated and missing config options.

Signed-off-by: Paul Kocialkowski 
Reviewed-by: Tom Rini

amcc-common.h: Disable CONFIG_SYS_LONGHELP

2016-02-29T19:47:47+00:00

There are a number of AMCC platforms which are close to, or with some
toolchains exceeding, the size constraints.  Disable CONFIG_SYS_LONGHELP
to get us room to build with again.

Signed-off-by: Tom Rini

ARM: uniphier: default to environment in eMMC

2016-02-28T18:50:16+00:00

Of the several boot devices supported, it looks like the eMMC is the
most commonly used.  Enable CONFIG_ENV_IS_IN_MMC by default.

Signed-off-by: Masahiro Yamada

ARM: uniphier: add emmcupdate command

2016-02-28T18:50:16+00:00

The Boot ROM expects the boot image (SPL) in the Boot Partition 1.
So, updating images involves the hardware partition switch.  It might
be a bit advanced for some users.

To be user-friendly, this commit adds a useful command to update the
images; just put SPL and U-Boot proper into the public directory of
the TFTP server and execute "run emmcupdate" from the command line.

Signed-off-by: Masahiro Yamada

ARM: uniphier: add eMMC boot support

2016-02-28T18:50:16+00:00

Export device nodes needed for eMMC boot (eMMC node, pinctrl, and
clock) to the SPL DTB.  CONFIG_SUPPORT_EMMC_BOOT is also necessary
to use "mmc partconf" command.

Signed-off-by: Masahiro Yamada