u-boot.git/include/configs, branch v2017.09-rc1

configs: Migrate CMD_NAND*

2017-07-31T16:21:40Z

Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: Adam Ford Signed-off-by: Tom Rini Reviewed-by: Bin Meng

env: Migrate CONFIG_ENV_IS_IN_FAT options to Kconfig

2017-07-31T15:22:56Z

We rename the various FAT_ENV_xxx options to CONFIG_ENV_FAT_xxx so that they can be modified via Kconfig. Migrate all existing users to the new values. Signed-off-by: Tom Rini

Remove unused CONFIG_TWL4030_PWM

2017-07-31T15:22:55Z

CONFIG_TWL4030_PWM is not being used by any source, so let's remove the #define and the whitelist entry Signed-off-by: Adam Ford Reviewed-by: Tom Rini

serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig

2017-07-31T15:22:54Z

Add CONFIG_STM32X7_SERIAL as a Kconfig option. Signed-off-by: Patrice Chotard Reviewed-by: Vikas Manocha

x86: minnowmax: Remove CONFIG_SMSC_LPC47M

2017-07-30T02:30:25Z

There is no SMSC LPC47M Super I/O chipset on the MinnowMax board. Signed-off-by: Bin Meng

x86: Add Intel Edison board files

2017-07-30T02:30:25Z

Add Intel Edison board which is using U-Boot. The patch is based on work done by the following people (in alphabetical order): Aiden Park Dukjoon Jeon eric.park Fabien Chereau Felipe Balbi Scott D Phillips Sebastien Colleur Steve Sakoman Vincent Tinelli In case we're building for Intel Edison, we must have 4096 bytes of zeroes in the beginning on u-boot.bin. This is done in board/intel/edison/config.mk. First run sets hardware_id environment variable which is read from System Controller Unit (SCU). Serial number (serial# environment variable) is generated based on eMMC CID. MAC address on USB network interface is unique to the board but kept the same all over the time. Set mac address from U-Boot using following scheme: OUI = 02:00:86 next 3 bytes of MAC address set from eMMC serial number This allows to have a unique mac address across reboot and flashing. Signed-off-by: Vincent Tinelli Signed-off-by: Felipe Balbi Signed-off-by: Andy Shevchenko Reviewed-by: Bin Meng Reviewed-by: Simon Glass [bmeng: Add MAINTAINERS file for Intel Edison board] Signed-off-by: Bin Meng

Merge git://git.denx.de/u-boot-socfpga

2017-07-29T15:44:08Z

x86: minnowmax: Add a environment variable for USB power-on delay

2017-07-28T21:34:27Z

Occasionally it was observed that on Intel MinnowMax board, with a USB 2.0 device connected to the bottom port, when doing 'usb start' on the xHCI controller: scanning bus 0 for devices... cannot reset port 3!? But neither of the two USB ports is routed to xHCI root port 3. Adding some debug information shows that xHCI port 3 PORTSC register mysteriously reports both CCS = 1 and CSC = 1. This is not seen every time. After increasing the timeout to wait for power to become stable, the issue is gone. So this indicates current default USB power-on delay (20ms) might be at a critical region where power is stable/unstable. U-Boot provides a mechanism to have a environment variable to override the default one. Add one for MinnowMax. Signed-off-by: Bin Meng Reviewed-by: Simon Glass Reviewed-by: Stefan Roese Tested-by: Stefan Roese

configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards

2017-07-28T21:34:24Z

Now that EHCD does not use CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS, remove it in all boards' config files. Signed-off-by: Bin Meng Reviewed-by: Simon Glass Reviewed-by: Stefan Roese Tested-by: Stefan Roese

configs: Remove CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS in all boards

2017-07-28T21:34:23Z

Now that xHCD does not use CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS, remove it in all boards' config files. Signed-off-by: Bin Meng Reviewed-by: Simon Glass Reviewed-by: Stefan Roese Tested-by: Stefan Roese