Since 'commit af2f44267 ("fdc spl: use different BOARD_INIT MACRO for spl and tpl")'
board stm32f746-disco can't boot.

The macro CONFIG_IS_ENABLED() can't evaluate the value of
CONFIG_SPL_BOARD_INIT as it was defined in include/configs/stm32f746-disco.h
without attributed value.

Moving CONFIG_SPL_BOARD_INIT from stm32f746-disco.h to mach-stm32/Kconfig
fixes this issue.

Fixes: af2f44267 ("fdc spl: use different BOARD_INIT MACRO for spl and tpl")
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Setting config options using headers is deprecated. This patch converts
the BCM2835 Mini-UART to Kconfig.

Signed-off-by: Alexander Graf <agraf@suse.de>

We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.

This round goes to pl01x.

Signed-off-by: Alexander Graf <agraf@suse.de>

We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.

This round goes to pl011.

Signed-off-by: Alexander Graf <agraf@suse.de>

We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.

This round goes to pl010.

Signed-off-by: Alexander Graf <agraf@suse.de>

Firmware on the Raspberry Pi family of devices can dynamically configure either
the PL011, Mini-UART or no device at all to be routed to the user accessible
UART pins.

That means we need to always include both drivers, because we can never be sure
which of the two serial devices firmware actually chooses to use.

Signed-off-by: Alexander Graf <agraf@suse.de>

This patch adds support for the PDU001 board.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Tom Rini <trini@konsulko.com>

The omap3_evm board does not boot when commit:
    a47ca2cf67 ("ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4")
is applied after commit:
    3dde8f2037 ("Merge git://git.denx.de/u-boot-mmc")

This commit reduces the CONFIG_EXTRA_ENV_SETTINGS size and better
leverages the existing distro bootcmd infrastructure.

- Use updated UBIFS support from config_distro_bootcmd.h
- Use LEGACY_MMC naming found in am335x_evm.h and ti_omap4_common.h
- Remove extra environment content that is no longer needed

[MMC(0:1)/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-evm-mmc-fat
label omap3-evm-mmc-fat
	kernel /zImage
	fdt /omap3-evm.dtb
	append console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
---8<-------------------------------------------------------------------

[MMC(0:2)/boot/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-evm-mmc-ext4
label omap3-evm-mmc-ext4
	kernel /boot/zImage
	fdt /boot/omap3-evm.dtb
	append console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
---8<-------------------------------------------------------------------

[NAND(ubi0:rootfs)/boot/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-evm-nand-ubifs
label omap3-evm-nand-ubifs
	kernel /boot/zImage
	fdt /boot/omap3-evm.dtb
	append console=ttyO0,115200n8 root=ubi0:rootfs rw ubi.mtd=rootfs noinitrd rootfstype=ubifs rootwait
---8<-------------------------------------------------------------------

Fixes: a47ca2cf67 ("ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4")
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>

Since 7e0ed13 ("Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to
Kconfig"), a default SYS_TEXT_BASE was set for all ARCH_OMAP2PLUS devices.
CONFIG_ISW_ENTRY_ADDR is used to set SYS_TEXT_BASE in qspi boot.

Simplify this by directly assigning SYS_TEXT_BASE in the defconfig.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>

Add stm32f429-evaluation board support.
For more information, please visit:
http://www.st.com/en/evaluation-tools/stm32429i-eval.html

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>