u-boot.git/include/configs, branch v2018.03-rc3

ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot

2018-02-19T07:58:55+00:00

Add a new API to perform iodelay recalibration without isolate
io to be used in uboot.

The data manual of J6/J6 Eco recommends to set different IODELAY values
depending on the mode in which the MMC/SD is enumerated in order to
ensure IO timings are met. The MMC driver can use the new API to
set the IO delay values depending on the MMC mode.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Jean-Jacques Hiblot

ARM: rmobile: Replace SH I2C with IIC on Porter

2018-02-17T21:00:25+00:00

Get rid of the SH I2C driver on Porter and enable the IIC driver
instead . The old SH I2C is completely broken on Porter anyway
and the DM/DT capable IIC driver allows access to the PMIC too.
Use the DM/DT capable driver instead.

Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

ARM: rmobile: Set FDT/initramfs limits on Porter

2018-02-17T20:59:22+00:00

Set those limits to inform U-Boot about FDT and initramfs placement.

Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

Merge git://git.denx.de/u-boot-sh

2018-02-16T18:56:02+00:00

Merge git://git.denx.de/u-boot-socfpga

2018-02-16T18:55:51+00:00

ARM: rmobile: Enable autocompletion on Gen2

2018-02-16T15:43:11+00:00

This makes the shell so much more pleasant to use, so enable it.

Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

ARM: rmobile: Convert Porter to SPL

2018-02-16T15:43:11+00:00

Due to size limitations of the MERAM, switch U-Boot to SPL.
The SPL is loaded by the SPI_LOADER into MERAM and then loads
U-Boot proper into DRAM. This way U-Boot can freely grow in
size in DRAM, as there is plenty of it.

Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu 
---
NOTE: To update U-Boot, first install u-boot.img to 0x140000 in SPI NOR,
      then use the Minimon to flash u-boot-spl.srec using ls,2,e6304000.
      To generate u-boot-spl.srec, use objcopy:
        arm-linux-gnueabi-objcopy -O srec spl/u-boot-spl u-boot-spl.srec

ARM: rmobile: Enable autocompletion on Gen3

2018-02-16T15:43:09+00:00

This makes the shell so much more pleasant to use, so enable it.

Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

Convert socfpga: select CONFIG_HW_WATCHDOG support for ARCH_SOCFPGA

2018-02-15T12:45:16+00:00

All Socfpga boards from ./include/configs/socfpga_* define
CONFIG_HW_WATCHDOG.
To ease CONFIG_HW_WATCHDOG conversion to Kconfig select it in
config ARCH_SOCFPGA (arch/arm/Kconfig) section.

Signed-off-by: Lukasz Majewski 
Signed-off-by: Simon Goldschmidt

Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig

2018-02-15T12:20:53+00:00

This converts the following to Kconfig:
   CONFIG_SYS_BOOTCOUNT_SINGLEWORD

Signed-off-by: Lukasz Majewski 
Tested-by: Alex Kiernan 
Reviewed-by: Ian Ray