u-boot.git/include/configs, branch v2018.11-rc3 Unnamed repository; edit this file 'description' to name the repository. x86: theadorable-x86: Generate and pass root=PARTUUID instead of /dev/sdaX 2018-10-28T13:02:15+00:00 Stefan Roese sr@denx.de 2018-10-22T12:07:55+00:00 6e1c943f3ce6b16dc56ed2b55bd1b25a57984f80 To enable the root device selection (kernel cmd-line) via PARTUUID, this patch enables CMD_PART on all missing theadorable-x86 boards and changes the default environment to generate the root=PARTUUID string automatically. This fixes problems that have been noticed on systems with multiple SATA/AHCI controller connected via PCIe, where the device name for the root device / partition (/dev/sdaX) was incorrect. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
To enable the root device selection (kernel cmd-line) via PARTUUID, this
patch enables CMD_PART on all missing theadorable-x86 boards and
changes the default environment to generate the root=PARTUUID string
automatically.

This fixes problems that have been noticed on systems with multiple
SATA/AHCI controller connected via PCIe, where the device name for the
root device / partition (/dev/sdaX) was incorrect.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
x86: theadorable-x86-common: Change pci hotplug cmdline parameters (again) 2018-10-28T13:02:15+00:00 Stefan Roese sr@denx.de 2018-10-22T12:07:54+00:00 0ca4405fcd97f453605a7200c29bb2d757e749d7 This is needed for the PCIe hotplug to work correctly on some boards with the newer Linux kernel versions. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
This is needed for the PCIe hotplug to work correctly on some boards
with the newer Linux kernel versions.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Merge branch 'master' of git://git.denx.de/u-boot-net 2018-10-26T00:30:05+00:00 Tom Rini trini@konsulko.com 2018-10-26T00:30:05+00:00 f749b61821409772904b8fe7ab62909db82a7c83 






Merge tag 'u-boot-imx-20181025' of git://git.denx.de/u-boot-imx
2018-10-25T14:16:21+00:00

Tom Rini
trini@konsulko.com

2018-10-25T14:16:21+00:00

cf033e04da315ba949e804c127abae0134bda30f

Merged imx8 architecture, fix build for imx8 + warnings





Merged imx8 architecture, fix build for imx8 + warnings







configs: migrate CONFIG_PHY_AQUANTIA to Kconfig
2018-10-24T19:45:36+00:00

Jeremy Gebben
jgebben@sweptlaser.com

2018-09-18T21:49:35+00:00

1c6501088ecab1eaa959aae54a560c3e1970ba4c

The aquantia driver requires both CONFIG_PHY_GIGE and CONFIG_PHYLIB_10G.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>





The aquantia driver requires both CONFIG_PHY_GIGE and CONFIG_PHYLIB_10G.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>







ARM: omap3_logic: Add NOR Flash Support for SOM-LV
2018-10-22T13:18:49+00:00

Adam Ford
aford173@gmail.com

2018-10-14T20:53:17+00:00

290097fe2736dd23bfb926658d188db533b59779

The DM37 and OMAP35 SOM-LV SOM-LV products both support a NOR
flash part connected to CS2 in addition to the NAND part on CS0.
This patch setups the GPMC timings for the MT28 NOR Flash and
enables the CFI-Flash driver now that the CFI stuff is in Kconfig

Signed-off-by: Adam Ford <aford173@gmail.com>





The DM37 and OMAP35 SOM-LV SOM-LV products both support a NOR
flash part connected to CS2 in addition to the NAND part on CS0.
This patch setups the GPMC timings for the MT28 NOR Flash and
enables the CFI-Flash driver now that the CFI stuff is in Kconfig

Signed-off-by: Adam Ford <aford173@gmail.com>







arm: udoo: Convert to distro config
2018-10-22T13:18:49+00:00

Meul, Dirk
Dirk.Meul@rwth-aachen.de

2018-10-13T12:54:01+00:00

e18333e50147a7ba6715a7012f1b03ed5009f628

Instead of keeping a custom environment, use a more generic approach
by switching to distro config.

Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>





Instead of keeping a custom environment, use a more generic approach
by switching to distro config.

Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>







warp7: include: configs: set skip low level init
2018-10-22T12:37:28+00:00

Rui Miguel Silva
rui.silva@linaro.org

2018-09-05T10:56:07+00:00

a612e25e13d35656630440a191ddd851319737ff

If we have defined the OPTEE ram size and not OPTEE means that we are in
the case where OPTEE is loaded already (maybe by ARM Trusted Firmware) and
that most of the low level initialization is already done and that we
may/should skip it doing them here.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: u-boot@lists.denx.de





If we have defined the OPTEE ram size and not OPTEE means that we are in
the case where OPTEE is loaded already (maybe by ARM Trusted Firmware) and
that most of the low level initialization is already done and that we
may/should skip it doing them here.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: u-boot@lists.denx.de







Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig
2018-10-22T12:33:54+00:00

Xiaoliang Yang
xiaoliang.yang_1@nxp.com

2018-10-18T09:14:19+00:00

517066a7094499712f7fc6f1d5c116427bdced08

Move this option to Kconfig and tidy up the config file of eight
boards which use it.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>





Move this option to Kconfig and tidy up the config file of eight
boards which use it.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>







imx: add i.MX8QXP MEK board support
2018-10-22T11:00:09+00:00

Peng Fan
peng.fan@nxp.com

2018-10-18T12:28:37+00:00

d0dd73974c613650cb0c3d32a734a954cedc9f8a

Add i.MX8QXP MEK board support
Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver.
Added README file.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>





Add i.MX8QXP MEK board support
Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver.
Added README file.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>